How to update to the latest Tailscale version?
-
@veddy254 Thank you, got it
-
Thanks
ping 192.200.0.1 PING 192.200.0.1 (192.200.0.1): 56 data bytes 64 bytes from 192.200.0.1: icmp_seq=0 ttl=45 time=120.432 ms 64 bytes from 192.200.0.1: icmp_seq=1 ttl=45 time=129.154 ms 64 bytes from 192.200.0.1: icmp_seq=2 ttl=45 time=121.636 ms 64 bytes from 192.200.0.1: icmp_seq=3 ttl=45 time=132.175 ms
-
-
Updated CE 2.7.2 to 1.84.2_1
pkg add -f https://pkg.freebsd.org/FreeBSD:14:amd64/latest/All/tailscale-1.84.2_1.pkg
-
@elvisimprsntr said in How to update to the latest Tailscale version?:
pkg add -f https://pkg.freebsd.org/FreeBSD:14:amd64/latest/All/tailscale-1.84.2_1.pkg
Thanks!
-
For 25.07 RC, this worked for me (run
sh
first)[25.07-RC][root@r1.lan]/root: sh # export IGNORE_OSVERSION=yes # pkg add https://pkg.freebsd.org/FreeBSD:15:amd64/latest/All/tailscale-1.84.2.pkg # service tailscaled restart # tailscale up
# tailscale version 1.84.2 go version: go1.24.4 # tailscaled -version 1.84.2 go version: go1.24.4
-
Updated CE 2.7.2 to 1.86.0, but I see there is already a 1.86.2. So you might want to hold off.
Note: Tailscale halted the rollout of version 1.86.0 for macOS on July 25, 2025, and for all other platforms on July 28, 2025, due to multiple regressions.
pkg add -f https://pkg.freebsd.org/FreeBSD:14:amd64/quarterly/All/tailscale-1.86.0.pkg
-
@elvisimprsntr Thanks, just updated, works fine!
-
Updated CE 2.7.2 to 1.86.2
pkg add -f https://pkg.freebsd.org/FreeBSD:14:amd64/quarterly/All/tailscale-1.86.2.pkg
-
Any ideas to why I get this error? Im running pfsense CE 2.8.0-RELEASE (amd64)
pkg add https://pkg.freebsd.org/FreeBSD:15:amd64/latest/All/tailscale-1.84.2_1.pkg pkg: An error occured while fetching package
-
@lbm_ said in How to update to the latest Tailscale version?:
https://pkg.freebsd.org/FreeBSD:15:amd64/latest/All/tailscale-1.84.2_1.pkg
pkg: An error occured while fetching packageI would recommend verifying the DNS settings in PfSense and verifying date/time is correct. Barring that, try again later and see if it still fails. I was able to successfully run the command on my 2.8.0 install (I didn't install it because I've already installed it) so it seems localized.