Error "loading the rules" after reboot

[ahole4sure]

I had to restore a backup after I lost some hardware -- I thnk this might be where the issue came from
I think this might be the first reboot that has occurred after the setup

Here's the error:
18:15:59 There were error(s) loading the rules: /tmp/rules.debug:95: macro 'TAILSCALE__NETWORK' not defined - The line in question reads [95]: nat on $Tailscale inet from $OPT1__NETWORK to $TAILSCALE__NETWORK -> (Tailscale) static-port

But screenshots on my NAT page don't show the culprit.

Was able to get to the file /tmp/rules.debug but wasnt sure how to or even if I could edit the file

As noted in the sceenshot I don't even have and "static ports" defined in the settings BUT I think I might have in my prior setup for restoring a backup (I had to manually recreate a number of things to get the restored backup to work)

Just woud like to fix so that I quit getting the notification of the error

[stephenw10]

It's almost certainly because at the first boot it had not yet installed the Tailscale package when it first loaded the ruleset.

If that error doesn't re-appear after clearing it and the tailscale package is now installed then it's nothing to worry about.