MiFi Novatel Wireless 5792 / AT&T Liberate support
-
I'm trying to get a Novatel Wireless 5792 device to work with PfSense. This device is also known as an AT&T Liberate device.
If I plug it into to my pfSense physical device running 2.4.1, it does in fact recognize it.
[2.4.1-RELEASE][root@pfSense.home]/dev: usbconfig -d ugen0.4 dump_device_desc ugen0.4: <novatel 5792="" wireless="" mifi="">at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON (500mA) bLength = 0x0012 bDescriptorType = 0x0001 bcdUSB = 0x0200 bDeviceClass = 0x0002 <communication device="">bDeviceSubClass = 0x0006 bDeviceProtocol = 0x0000 bMaxPacketSize0 = 0x0040 idVendor = 0x1410 idProduct = 0xb009 bcdDevice = 0x0228 iManufacturer = 0x0001 <novatel wireless="">iProduct = 0x0002 <mifi 5792="">iSerialNumber = 0x0003 <0123456789ABCDEF> bNumConfigurations = 0x0002</mifi></novatel></communication></novatel>
But when I go to add it under an Interface>PPP, it does not find it. All it finds under PPP interfaces is /deve/cuau0. It will detect that regardless of if the MiFi device is plugged in via USB to the pfSense or not.
Is there anything else that I need to do in order to enable support for this device?