Resolver nomes entre vlans

varelasantiago

Consigo comunicar com outro PC de outra VLAN pelo endereço IP mas não consigo pelo nome, exemplo:

consigo pingar, acessar explorer, etc. através do IP, mas o nome do PC não consigo, exemplo:
\\10.10.1.3 - ok
\\srvdados - não funciona

minha rede:
10.10.1.0/24 - lan
10.40.1.0/24 - vlan 40
10.50.1.0/24 - vlan 50

10.10.1.1 - pfsense + nxfilter
10.10.1.3 - servidor

10.40.1.100 - meu pc

no pfsense está configurado:
dhcp server lan:

DNS: 10.10.1.1
Gateway: 10.10.1.1

dhcp server vlan40:

DNS: 10.40.1.1
Gateway: 10.40.1.1

mcury

@varelasantiago

Se for Linux, no etc/resolv.conf, coloque:
search home.arpa depois do nameserver.

(altere home.arpa para o seu domínio).

varelasantiago

@mcury Thanks for the suggestion, but it's not feasible to do this on a large network with 1,600 computers. I saw a configuration that uses a firewall rule, but the example uses Active Directory servers 192.168.1.250 and 192.168.1.251... but I don't know how it would apply to my Pfsense + Nxfilter.

https://youtu.be/aEKCA67kv5I?list=PL3Sj98RICiBGwqBgTGDTCMlwwwF6fiD2a

mcury

@varelasantiago said in Resolver nomes entre vlans:

@mcury Thanks for the suggestion, but it's not feasible to do this on a large network with 1,600 computers. I saw a configuration that uses a firewall rule, but the example uses Active Directory servers 192.168.1.250 and 192.168.1.251... but I don't know how it would apply to my Pfsense + Nxfilter.

https://youtu.be/aEKCA67kv5I?list=PL3Sj98RICiBGwqBgTGDTCMlwwwF6fiD2a

If you're using Active Directory (AD), configure AD’s DHCP and disable pfSense's DHCP. Use AD's DNS servers to manage name resolution. To integrate NxFilter, configure AD’s DNS server to forward requests to pfSense’s DNS resolver.