Load average increase after update
-
Hello,
I noticed the load average increased and it's always over 1 after last upgrade to 2.4.1 version; before upgrade it was 0.0x
can you suggest how to check what's going wrong?
Thankslast pid: 10531; load averages: 1.17, 1.36, 1.32 up 0+01:06:34 17:12:22
143 processes: 5 running, 117 sleeping, 21 waitingMem: 60M Active, 60M Inact, 188M Wired, 17M Buf, 7403M Free
Swap: 16G Total, 16G FreePID USERNAME PRI NICE SIZE RES STATE C TIME WCPU COMMAND
11 root 155 ki31 0K 64K CPU3 3 65:36 100.00% [idle{idle: cpu3}]
11 root 155 ki31 0K 64K CPU1 1 65:27 100.00% [idle{idle: cpu1}]
11 root 155 ki31 0K 64K RUN 0 65:26 100.00% [idle{idle: cpu0}]
11 root 155 ki31 0K 64K CPU2 2 65:22 100.00% [idle{idle: cpu2}]
4505 root 52 0 263M 38124K piperd 0 0:00 1.46% php-fpm: pool nginx (php-fpm)
0 root -16 - 0K 368K swapin 0 0:34 0.00% [kernel{swapper}]
12 root -60 - 0K 336K WAIT 2 0:03 0.00% [intr{swi4: clock (0)}]
17 root -16 - 0K 16K - 3 0:02 0.00% [rand_harvestq]
73707 uucp 20 0 14876K 2800K nanslp 2 0:02 0.00% /usr/local/libexec/nut/riello_usb -a IDG40
26082 root 20 0 37704K 9108K kqread 2 0:01 0.00% nginx: worker process (nginx)
42417 root 52 20 13084K 2588K wait 3 0:01 0.00% /bin/sh /var/db/rrd/updaterrd.sh
0 root 8 - 0K 368K - 2 0:01 0.00% [kernel{thread taskq}]
15 root -76 - 0K 80K - 1 0:01 0.00% [usb{usbus0}]
12 root -88 - 0K 336K WAIT 2 0:01 0.00% [intr{irq271: xhci0}]
16 root -16 - 0K 16K pftm 0 0:01 0.00% [pf purge]
0 root -92 - 0K 368K - 0 0:01 0.00% [kernel{em3 que}]
0 root -92 - 0K 368K - 1 0:01 0.00% [kernel{em0 que}]
21909 unbound 20 0 72924K 26584K kqread 2 0:01 0.00% /usr/local/sbin/unbound -c /var/unbound/un -
I noticed the load average increased and it's always over 1 after last upgrade to 2.4.1 version
From witch version you were upgrading to the version 2.4.1? From 2.3.x or 2.4.0 to 2.4.1 or was it from an earlier
version?What do you think about a fresh and full install? It takes mostly much less time and is then on top of this
more smooth and liquid running. You can fairly backup oyur configuration and reload it then later. -
2.4.0 to 2.4.1
But originally it was 2.3 and up to 2.4.0 no problems. I just have openvpn client to connect to PIA VPN