Upgrade 2.7.2 to 2.8.1 frozen
-
Hi all,
I am trying to upgrade 2.7.2 to 2.8.1.
Consistently on multiple different kvm's after downloading packages and reboot, upgrade process is timing out at :
Trying to mount root from ufs:/dev/ufsid/60c8aa545bb2e563 [rw,noatime]...If at this moment I do restart and during boot select old kernel (from 2.7.2) upgrade will continue and succeed.
After successful upgrade, I can revert it to new kernel and then its fine.
Any idea why would it fail to mount disk for the first time would be much appreciated.
Tnx -
Same hypervisors on each?
It could just be failing to show more on the console. That point is where the output switches to the primary console only.
-
@stephenw10 I'm having a similar problem, NOT using a *vm.
I tried to just post in this area, but I was being forced to use "reply".
I get "Mounting from zfs:pfSense/ROOT/default failed with error 6. (I have a picture of this, but I can't get my email on my phone to send the picture to my laptop where I am writing this).
I have used a DVD with pfSense+ that reverts to CE, and I've tried the 2.8.0 and 2.8.1 options.
So, with a working 2.7.1 from that DVD, I configured it and made sure I did not have any packages installed. Then told the running system to do the upgrade to 2.8.1 (to pull from the Netgate servers) and get the above failure.
Not in a rush, this was my backup system that I am pushing (well, trying) to be the Primary firewall/gateway system making the currently running system my back up (should I need such). Just trying to figure out what is wrong and what is the command I need to use (if any).
-
So installing 2.8.0 or 2.8.1 from the net installer fails in the same way? 2.7.2 installs but then fails the same at upgrade?
What are you installing to?
-
@stephenw10 I hope I am answering with what you need:
I am installing on a fairly new tower with an ASUS Mobo:
UEFI PRIME B550M
5600x 6 core AMD Ryzen 5 @ 3700MHz
w/ 16384 MB (2) 256GB SSDs.I have had it running 2.7.1 just fine (have an ISO for that).
I have installed using a pfSense+ DVD that "fails" (I don't have a "key" for it) and I have my choice then of installing 2.7.1, or 2.8.0 or 2.8.1. Meanwhile 2.7.2 runs just fine for a smoke test. But once it pulls in the update from the servers, for 2.8.x and applies it, the subsequent boot of the "update" fails.
-
Hmm, are there any other errors during the boot?
Does it eventually fail to the 'mountroot>' prompt? If so what does it show there if you enter
?at the prompt? -
@stephenw10 Yes, same hypervisor on each.
These are long time working 2.7.2 VM instances, GUI/CLI upgrade to latest version (2.8.1)
I am adding console output :
virsh console one-4335
[2025/11/16 - 19:11:37.477]Connected to domain 'one-4335'
[2025/11/16 - 19:11:37.478]Escape character is ^] (Ctrl + ])
[2025/11/16 - 19:19:44.120]Waiting (max 60 seconds) for system processvnlru' to stop... done [2025/11/16 - 19:19:44.417]Waiting (max 60 seconds) for system processsyncer' to stop...
[2025/11/16 - 19:19:47.146]Syncing disks, vnodes remaining... 2 1 0 done
[2025/11/16 - 19:19:47.188]All buffers synced.
[2025/11/16 - 19:19:47.386]Uptime: 15m19s
[2025/11/16 - 19:19:47.435]Khelp module "ertt" can't unload until its refcount drops from 40 to 0.
[2025/11/16 - 19:19:47.435]uhub0: detached
[2025/11/16 - 19:19:47.492]Rebooting...
[2025/11/16 - 19:19:47.495]cpu_reset: Stopping other CPUs
[2025/11/16 - 19:19:47.952]/boot/config: -S115200 -D
[2025/11/16 - 19:19:50.974]Consoles: internal video/keyboard serial port
[2025/11/16 - 19:19:50.976]BIOS drive C: is disk0
[2025/11/16 - 19:19:50.979]BIOS 639kB/3144556kB available memory
[2025/11/16 - 19:19:50.979]
[2025/11/16 - 19:19:50.984]FreeBSD/x86 bootstrap loader, Revision 3.0
[2025/11/16 - 19:19:50.985](Thu Aug 28 16:26:46 UTC 2025 root@pfsense-build-release-amd64-1.eng.atx.netgate.com)
[2025/11/16 - 19:19:50.986]Loading /boot/defaults/loader.conf
[2025/11/16 - 19:19:51.016]Loading /boot/defaults/loader.conf
[2025/11/16 - 19:19:51.020]Loading /boot/device.hints
[2025/11/16 - 19:19:51.020]Loading /boot/loader.conf
[2025/11/16 - 19:19:51.028]Failed to load conf dir '/boot/loader.conf.d': not a directory
[2025/11/16 - 19:19:51.029]Loading /boot/loader.conf.local
[2025/11/16 - 19:19:53.562]Loading kernel...
[2025/11/16 - 19:19:54.586]/boot/kernel/kernel text=0x1a98a0 text=0x1014f58 text=0xeb1d98 data=0x180+0xe80 data=0x251280+0x3aed80 0x8+0x1d92e0+0x8+0x1efbee
[2025/11/16 - 19:19:54.626]Loading configured modules...
[2025/11/16 - 19:19:54.628]/boot/entropy size=0x1000
[2025/11/16 - 19:19:54.629]can't find '/etc/hostid'
[2025/11/16 - 19:19:55.279]GDB: no debug ports present
[2025/11/16 - 19:19:55.321]KDB: debugger backends: ddb
[2025/11/16 - 19:19:55.322]KDB: current backend: ddb
[2025/11/16 - 19:19:55.323]---<<BOOT>>---
[2025/11/16 - 19:19:55.323]Copyright (c) 1992-2024 The FreeBSD Project.
[2025/11/16 - 19:19:55.326]Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
[2025/11/16 - 19:19:55.327] The Regents of the University of California. All rights reserved.
[2025/11/16 - 19:19:55.327]FreeBSD is a registered trademark of The FreeBSD Foundation.
[2025/11/16 - 19:19:55.328]FreeBSD 15.0-CURRENT #21 RELENG_2_8_1-n256095-47c932dcc0e9: Thu Aug 28 16:27:48 UTC 2025
[2025/11/16 - 19:19:55.371] root@pfsense-build-release-amd64-1.eng.atx.netgate.com:/var/jenkins/workspace/pfSense-CE-snapshots-2_8_1-main/obj/amd64/AupY3aTL/var/jenkins/workspace/pfSe4
[2025/11/16 - 19:19:55.371]FreeBSD clang version 19.1.5 (https://github.com/llvm/llvm-project.git llvmorg-19.1.5-0-gab4b5a2db582)
[2025/11/16 - 19:19:55.371]VT(vga): text 80x25
[2025/11/16 - 19:19:55.411]CPU: Intel(R) Xeon(R) Silver 4314 CPU @ 2.40GHz (2394.45-MHz K8-class CPU)
[2025/11/16 - 19:19:55.413] Origin="GenuineIntel" Id=0x606a6 Family=0x6 Model=0x6a Stepping=6
[2025/11/16 - 19:19:55.423] Features=0xfa3fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,DTS,MMX,FXSR,SSE,SSE2,SS>
[2025/11/16 - 19:19:55.448] Features2=0xfffab227<SSE3,PCLMULQDQ,DTES64,VMX,SSSE3,FMA,CX16,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND,HV>
[2025/11/16 - 19:19:55.449] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
[2025/11/16 - 19:19:55.450] AMD Features2=0x121<LAHF,ABM,Prefetch>
[2025/11/16 - 19:19:55.467] Structured Extended Features=0xf1bf07ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,AVX512F,AVX512DQ,RDSEED,ADX,SMAP,AVX512IFMA,CLFLUSHOPT,CLWB,AVX512CD>
[2025/11/16 - 19:19:55.469] Structured Extended Features2=0x415f5e<AVX512VBMI,UMIP,PKU,OSPKE,AVX512VBMI2,GFNI,VAES,VPCLMULQDQ,AVX512VNNI,AVX512BITALG,AVX512VPOPCNTDQ,LA57,RDPID>
[2025/11/16 - 19:19:55.470] Structured Extended Features3=0xbc000410<FSRM,MD_CLEAR,IBPB,STIBP,L1DFL,ARCH_CAP,SSBD>
[2025/11/16 - 19:19:55.471] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
[2025/11/16 - 19:19:55.484] IA32_ARCH_CAPS=0xc02a0eb<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME,MDS_NO,TSX_CTRL>
[2025/11/16 - 19:19:55.485] AMD Extended Feature Extensions ID EBX=0x100d200<WBNOINVD,IBPB,IBRS,STIBP,SSBD>
[2025/11/16 - 19:19:55.485] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr
[2025/11/16 - 19:19:55.485]Hypervisor: Origin = "KVMKVMKVM"
[2025/11/16 - 19:19:55.486]real memory = 4294967296 (4096 MB)
[2025/11/16 - 19:19:55.495]avail memory = 4087541760 (3898 MB)
[2025/11/16 - 19:19:55.495]Event timer "LAPIC" quality 600
[2025/11/16 - 19:19:55.496]ACPI APIC Table: <BOCHS BXPC >
[2025/11/16 - 19:19:55.524]FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
[2025/11/16 - 19:19:55.525]FreeBSD/SMP: 2 package(s) x 1 core(s)
[2025/11/16 - 19:19:55.525]random: registering fast source Intel Secure Key RNG
[2025/11/16 - 19:19:55.530]random: fast provider: "Intel Secure Key RNG"
[2025/11/16 - 19:19:55.531]random: unblocking device.
[2025/11/16 - 19:19:55.538]ioapic0 <Version 1.1> irqs 0-23
[2025/11/16 - 19:19:55.538]Launching APs: 1
[2025/11/16 - 19:19:55.538]TCP_ratelimit: Is now initialized
[2025/11/16 - 19:19:55.543]ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
[2025/11/16 - 19:19:55.567]ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
[2025/11/16 - 19:19:55.575]module_register_init: MOD_LOAD (ipw_bss_fw, 0xffffffff80758a00, 0) error 1
[2025/11/16 - 19:19:55.576]ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
[2025/11/16 - 19:19:55.581]ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
[2025/11/16 - 19:19:55.582]module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffffffff80758ab0, 0) error 1
[2025/11/16 - 19:19:55.582]ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
[2025/11/16 - 19:19:55.607]ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
[2025/11/16 - 19:19:55.608]module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffffffff80758b60, 0) error 1
[2025/11/16 - 19:19:55.665]iwi_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
[2025/11/16 - 19:19:55.683]iwi_bss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
[2025/11/16 - 19:19:55.684]module_register_init: MOD_LOAD (iwi_bss_fw, 0xffffffff807781d0, 0) error 1
[2025/11/16 - 19:19:55.685]iwi_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
[2025/11/16 - 19:19:55.686]iwi_ibss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
[2025/11/16 - 19:19:55.687]module_register_init: MOD_LOAD (iwi_ibss_fw, 0xffffffff80778280, 0) error 1
[2025/11/16 - 19:19:55.688]iwi_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
[2025/11/16 - 19:19:55.689]iwi_monitor: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
[2025/11/16 - 19:19:55.704]module_register_init: MOD_LOAD (iwi_monitor_fw, 0xffffffff80778330, 0) error 1
[2025/11/16 - 19:19:55.709]random: entropy device external interface
[2025/11/16 - 19:19:55.709]wlan: mac acl policy registered
[2025/11/16 - 19:19:55.709]kbd1 at kbdmux0
[2025/11/16 - 19:19:55.714]WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0.
[2025/11/16 - 19:19:55.714]netgate0: <KVM Guest>
[2025/11/16 - 19:19:55.714]netgate0: version: 0.1
[2025/11/16 - 19:19:55.714]vtvga0: <VT VGA driver>
[2025/11/16 - 19:19:55.714]kvmclock0: <KVM paravirtual clock>
[2025/11/16 - 19:19:55.714]Timecounter "kvmclock" frequency 1000000000 Hz quality 975
[2025/11/16 - 19:19:55.715]kvmclock0: registered as a time-of-day clock, resolution 0.000001s
[2025/11/16 - 19:19:55.715]smbios0: <System Management BIOS> at iomem 0xf5110-0xf512e
[2025/11/16 - 19:19:55.715]smbios0: Version: 2.8, BCD Revision: 2.8
[2025/11/16 - 19:19:55.715]acpi0: <BOCHS BXPC>
[2025/11/16 - 19:19:55.715]acpi0: Power Button (fixed)
[2025/11/16 - 19:19:55.716]cpu0: <ACPI CPU> on acpi0
[2025/11/16 - 19:19:55.746]atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
[2025/11/16 - 19:19:55.746]atrtc0: registered as a time-of-day clock, resolution 1.000000s
[2025/11/16 - 19:19:55.750]Event timer "RTC" frequency 32768 Hz quality 0
[2025/11/16 - 19:19:55.750]Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
[2025/11/16 - 19:19:55.757]acpi_timer0: <24-bit timer at 3.579545MHz> port 0x608-0x60b on acpi0
[2025/11/16 - 19:19:55.758]pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
[2025/11/16 - 19:19:55.767]pci0: <ACPI PCI bus> on pcib0
[2025/11/16 - 19:19:55.832]isab0: <PCI-ISA bridge> at device 1.0 on pci0
[2025/11/16 - 19:19:55.872]isa0: <ISA bus> on isab0
[2025/11/16 - 19:19:55.877]atapci0: <Intel PIIX3 WDMA2 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xc1c0-0xc1cf at device 1.1 on pci0
[2025/11/16 - 19:19:55.884]ata0: <ATA channel> at channel 0 on atapci0
[2025/11/16 - 19:19:55.885]ata1: <ATA channel> at channel 1 on atapci0
[2025/11/16 - 19:19:55.886]uhci0: <Intel 82371SB (PIIX3) USB controller> port 0xc040-0xc05f irq 11 at device 1.2 on pci0
[2025/11/16 - 19:19:56.021]usbus0 on uhci0
[2025/11/16 - 19:19:56.038]usbus0: 12Mbps Full Speed USB v1.0
[2025/11/16 - 19:19:56.061]pci0: <bridge> at device 1.3 (no driver attached)
[2025/11/16 - 19:19:56.069]vgapci0: <VGA-compatible display> mem 0xfc000000-0xfdffffff,0xfebd0000-0xfebd0fff at device 2.0 on pci0
[2025/11/16 - 19:19:56.069]vgapci0: Boot video device
[2025/11/16 - 19:19:56.071]virtio_pci0: <VirtIO PCI (legacy) Network adapter> port 0xc060-0xc07f mem 0xfebd1000-0xfebd1fff,0x380000000000-0x380000003fff irq 11 at device 3.0 on pci0
[2025/11/16 - 19:19:56.071]vtnet0: <VirtIO Networking Adapter> on virtio_pci0
[2025/11/16 - 19:19:56.071]vtnet0: Ethernet address: 52:54:00:00:30:fa
[2025/11/16 - 19:19:56.072]vtnet0: netmap queues/slots: TX 1/256, RX 1/128
[2025/11/16 - 19:19:56.072]000.000761 [ 452] vtnet_netmap_attach vtnet attached txq=1, txd=256 rxq=1, rxd=128
[2025/11/16 - 19:19:56.108]virtio_pci1: <VirtIO PCI (legacy) Network adapter> port 0xc080-0xc09f mem 0xfebd2000-0xfebd2fff,0x380000004000-0x380000007fff irq 11 at device 4.0 on pci0
[2025/11/16 - 19:19:56.116]vtnet1: <VirtIO Networking Adapter> on virtio_pci1
[2025/11/16 - 19:19:56.117]vtnet1: Ethernet address: 52:54:00:00:10:0d
[2025/11/16 - 19:19:56.129]vtnet1: netmap queues/slots: TX 1/256, RX 1/128
[2025/11/16 - 19:19:56.131]000.000762 [ 452] vtnet_netmap_attach vtnet attached txq=1, txd=256 rxq=1, rxd=128
[2025/11/16 - 19:19:56.139]virtio_pci2: <VirtIO PCI (legacy) Network adapter> port 0xc0a0-0xc0bf mem 0xfebd3000-0xfebd3fff,0x380000008000-0x38000000bfff irq 10 at device 5.0 on pci0
[2025/11/16 - 19:19:56.139]vtnet2: <VirtIO Networking Adapter> on virtio_pci2
[2025/11/16 - 19:19:56.139]vtnet2: Ethernet address: 52:54:00:00:50:02
[2025/11/16 - 19:19:56.169]vtnet2: netmap queues/slots: TX 1/256, RX 1/128
[2025/11/16 - 19:19:56.171]000.000763 [ 452] vtnet_netmap_attach vtnet attached txq=1, txd=256 rxq=1, rxd=128
[2025/11/16 - 19:19:56.181]virtio_pci3: <VirtIO PCI (legacy) Network adapter> port 0xc0c0-0xc0df mem 0xfebd4000-0xfebd4fff,0x38000000c000-0x38000000ffff irq 10 at device 6.0 on pci0
[2025/11/16 - 19:19:56.182]vtnet3: <VirtIO Networking Adapter> on virtio_pci3
[2025/11/16 - 19:19:56.182]vtnet3: Ethernet address: 52:54:00:00:58:00
[2025/11/16 - 19:19:56.182]vtnet3: netmap queues/slots: TX 1/256, RX 1/128
[2025/11/16 - 19:19:56.182]000.000764 [ 452] vtnet_netmap_attach vtnet attached txq=1, txd=256 rxq=1, rxd=128
[2025/11/16 - 19:19:56.188]virtio_pci4: <VirtIO PCI (legacy) Network adapter> port 0xc0e0-0xc0ff mem 0xfebd5000-0xfebd5fff,0x380000010000-0x380000013fff irq 11 at device 7.0 on pci0
[2025/11/16 - 19:19:56.188]vtnet4: <VirtIO Networking Adapter> on virtio_pci4
[2025/11/16 - 19:19:56.221]vtnet4: Ethernet address: 52:54:00:05:80:01
[2025/11/16 - 19:19:56.227]vtnet4: netmap queues/slots: TX 1/256, RX 1/128
[2025/11/16 - 19:19:56.228]000.000765 [ 452] vtnet_netmap_attach vtnet attached txq=1, txd=256 rxq=1, rxd=128
[2025/11/16 - 19:19:56.234]virtio_pci5: <VirtIO PCI (legacy) Network adapter> port 0xc100-0xc11f mem 0xfebd6000-0xfebd6fff,0x380000014000-0x380000017fff irq 11 at device 8.0 on pci0
[2025/11/16 - 19:19:56.234]vtnet5: <VirtIO Networking Adapter> on virtio_pci5
[2025/11/16 - 19:19:56.235]vtnet5: Ethernet address: 52:54:00:05:78:04
[2025/11/16 - 19:19:56.235]vtnet5: netmap queues/slots: TX 1/256, RX 1/128
[2025/11/16 - 19:19:56.235]000.000766 [ 452] vtnet_netmap_attach vtnet attached txq=1, txd=256 rxq=1, rxd=128
[2025/11/16 - 19:19:56.265]virtio_pci6: <VirtIO PCI (legacy) Network adapter> port 0xc120-0xc13f mem 0xfebd7000-0xfebd7fff,0x380000018000-0x38000001bfff irq 10 at device 9.0 on pci0
[2025/11/16 - 19:19:56.266]vtnet6: <VirtIO Networking Adapter> on virtio_pci6
[2025/11/16 - 19:19:56.266]vtnet6: Ethernet address: 52:54:00:00:70:00
[2025/11/16 - 19:19:56.280]vtnet6: netmap queues/slots: TX 1/256, RX 1/128
[2025/11/16 - 19:19:56.282]000.000767 [ 452] vtnet_netmap_attach vtnet attached txq=1, txd=256 rxq=1, rxd=128
[2025/11/16 - 19:19:56.284]virtio_pci7: <VirtIO PCI (legacy) Network adapter> port 0xc140-0xc15f mem 0xfebd8000-0xfebd8fff,0x38000001c000-0x38000001ffff irq 10 at device 10.0 on pci0
[2025/11/16 - 19:19:56.306]vtnet7: <VirtIO Networking Adapter> on virtio_pci7
[2025/11/16 - 19:19:56.319]vtnet7: Ethernet address: 52:54:00:00:78:00
[2025/11/16 - 19:19:56.320]vtnet7: netmap queues/slots: TX 1/256, RX 1/128
[2025/11/16 - 19:19:56.330]000.000768 [ 452] vtnet_netmap_attach vtnet attached txq=1, txd=256 rxq=1, rxd=128
[2025/11/16 - 19:19:56.331]virtio_pci8: <VirtIO PCI (legacy) Network adapter> port 0xc160-0xc17f mem 0xfebd9000-0xfebd9fff,0x380000020000-0x380000023fff irq 11 at device 11.0 on pci0
[2025/11/16 - 19:19:56.331]vtnet8: <VirtIO Networking Adapter> on virtio_pci8
[2025/11/16 - 19:19:56.332]vtnet8: Ethernet address: 52:54:00:17:b8:05
[2025/11/16 - 19:19:56.332]vtnet8: netmap queues/slots: TX 1/256, RX 1/128
[2025/11/16 - 19:19:56.350]000.000769 [ 452] vtnet_netmap_attach vtnet attached txq=1, txd=256 rxq=1, rxd=128
[2025/11/16 - 19:19:56.365]virtio_pci9: <VirtIO PCI (legacy) Network adapter> port 0xc180-0xc19f mem 0xfebda000-0xfebdafff,0x380000024000-0x380000027fff irq 11 at device 12.0 on pci0
[2025/11/16 - 19:19:56.365]vtnet9: <VirtIO Networking Adapter> on virtio_pci9
[2025/11/16 - 19:19:56.377]vtnet9: Ethernet address: 52:54:00:17:e0:36
[2025/11/16 - 19:19:56.378]vtnet9: netmap queues/slots: TX 1/256, RX 1/128
[2025/11/16 - 19:19:56.379]000.000770 [ 452] vtnet_netmap_attach vtnet attached txq=1, txd=256 rxq=1, rxd=128
[2025/11/16 - 19:19:56.381]virtio_pci10: <VirtIO PCI (legacy) Block adapter> port 0xc000-0xc03f mem 0xfebdb000-0xfebdbfff,0x380000028000-0x38000002bfff irq 10 at device 13.0 on pci0
[2025/11/16 - 19:19:56.397]vtblk0: <VirtIO Block Adapter> on virtio_pci10
[2025/11/16 - 19:19:56.404]vtblk0: 20483MB (41950384 512 byte sectors)
[2025/11/16 - 19:19:56.410]virtio_pci11: <VirtIO PCI (legacy) Balloon adapter> port 0xc1a0-0xc1bf mem 0x38000002c000-0x38000002ffff irq 10 at device 14.0 on pci0
[2025/11/16 - 19:19:56.410]vtballoon0: <VirtIO Balloon Adapter> on virtio_pci11
[2025/11/16 - 19:19:56.410]acpi_syscontainer0: <System Container> on acpi0
[2025/11/16 - 19:19:56.410]acpi_syscontainer1: <System Container> port 0xaf00-0xaf0b on acpi0
[2025/11/16 - 19:19:56.415]acpi_syscontainer2: <System Container> port 0xafe0-0xafe3 on acpi0
[2025/11/16 - 19:19:56.415]acpi_syscontainer3: <System Container> port 0xae00-0xae17 on acpi0
[2025/11/16 - 19:19:56.438]uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
[2025/11/16 - 19:19:56.443]uart0: console (115200,n,8,1)
[2025/11/16 - 19:19:56.443]atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
[2025/11/16 - 19:19:56.448]atkbd0: <AT Keyboard> irq 1 on atkbdc0
[2025/11/16 - 19:19:56.919]kbd0 at atkbd0
[2025/11/16 - 19:19:56.920]atkbd0: [GIANT-LOCKED]
[2025/11/16 - 19:19:57.881]psm0: <PS/2 Mouse> irq 12 on atkbdc0
[2025/11/16 - 19:19:57.891]psm0: [GIANT-LOCKED]
[2025/11/16 - 19:19:57.892]WARNING: Device "psm" is Giant locked and may be deleted before FreeBSD 15.0.
[2025/11/16 - 19:19:57.893]psm0: model IntelliMouse Explorer, device ID 4
[2025/11/16 - 19:19:57.902]fdc0: <floppy drive controller (FDE)> port 0x3f2-0x3f5,0x3f7 irq 6 drq 2 on acpi0
[2025/11/16 - 19:19:57.902]fdc0: does not respond
[2025/11/16 - 19:19:57.902]device_attach: fdc0 attach returned 6
[2025/11/16 - 19:19:57.902]orm0: <ISA Option ROM> at iomem 0xea800-0xeffff pnpid ORM0000 on isa0
[2025/11/16 - 19:19:57.940]vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff pnpid PNP0900 on isa0
[2025/11/16 - 19:19:57.941]attimer0: <AT timer> at port 0x40 on isa0
[2025/11/16 - 19:19:57.941]Timecounter "i8254" frequency 1193182 Hz quality 0
[2025/11/16 - 19:19:57.953]Event timer "i8254" frequency 1193182 Hz quality 100
[2025/11/16 - 19:19:57.953]Timecounters tick every 10.000 msec
[2025/11/16 - 19:19:57.954]Trying to mount root from ufs:/dev/ufsid/60c8aa545bb2e563 [rw,noatime]...
[2025/11/16 - 19:19:57.954]ugen0.1: <Intel UHCI root HUB> at usbus0
[2025/11/16 - 19:19:57.955]uhub0 on usbus0
[2025/11/16 - 19:19:57.955]uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
[2025/11/16 - 19:19:57.956]Dual Console: Video Primary, Serial Secondary
[2025/11/16 - 19:19:58.458]uhub0: 2 ports with 2 removable, self powered
[2025/11/16 - 19:26:41.587]
[2025/11/16 - 19:28:43.785]-- Closed: 2025/11/16 - 19:28:43.785 --Note : I tried waiting longer period :D
-
@bozo.bogd said in Upgrade 2.7.2 to 2.8.1 frozen:
Dual Console: Video Primary, Serial Secondary
It looks like you're connected to the serial console there but the video console is primary? It's probably throwing some error at the video console that you can't see. That should show you why it's not booting.
-
@stephenw10
I get: List of GEOM managed disk devices:
gpt/swap2 msdosfs/EFISYS2 gpt/efiboot2 nda1p4 nda1p3 nda1p2 nda1p1 gpt/zfs0 gpt/swap0 gpt/gptboot0 nda1 nda0p3 nda0p2 nda0p1 nda0
mountroot> -
@stephenw10 I actually had to put a video card in this system as it didn't have any native video. The video card only supplies HDMI, so I have an HDMI-VGA adapter to drive my normal monitor for testing. I do appreciate your input and your time. If all else fails I'll just go back to 271/2.
