All traffic stopped, looks a bug to me!
-
Was there anything logged at boot? What NIC(s) does that device have exactly?
Was that site also showing the Realtek watchdog errors sing the standard driver?
-
@stephenw10 I kept a copy of dmesg output before I rebooted it. I'll try to paste it here... Yes, both sites have showed the watchdog error before blocking all traffic to the LAN NIC.
-
This is dmesg after booting with two lines in loader.conf :
---<<BOOT>>---
Copyright (c) 1992-2024 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 15.0-CURRENT #21 RELENG_2_8_1-n256095-47c932dcc0e9: Thu Aug 28 16:27:48 UTC 2025
root@pfsense-build-release-amd64-1.eng.atx.netgate.com:/var/jenkins/workspace/pfSense-CE-snapshots-2_8_1-main/obj/amd64/AupY3aTL/var/jenkins/workspace/pfSense-CE-snapshots-2_8_1-main/sources/FreeBSD-src-RELENG_2_8_1/amd64.amd64/sys/pfSense amd64
FreeBSD clang version 19.1.5 (https://github.com/llvm/llvm-project.git llvmorg-19.1.5-0-gab4b5a2db582)
VT(efifb): resolution 800x600
CPU: Intel(R) Celeron(R) 2955U @ 1.40GHz (1396.85-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x40651 Family=0x6 Model=0x45 Stepping=1
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x4ddaebbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,XSAVE,OSXSAVE,RDRAND>
AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
AMD Features2=0x21<LAHF,ABM>
Structured Extended Features=0x2603<FSGSBASE,TSCADJ,ERMS,INVPCID,NFPUSG>
XSAVE Features=0x1<XSAVEOPT>
VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
TSC: P-state invariant, performance statistics
real memory = 4294967296 (4096 MB)
avail memory = 3989393408 (3804 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <ALASKA A M I >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
random: unblocking device.
WARNING: Bogus Interrupt Trigger Mode. Assume CONFORMS.
WARNING: Bogus Interrupt Trigger Mode. Assume CONFORMS.
ioapic0 <Version 2.0> irqs 0-39
Launching APs: 1
TCP_ratelimit: Is now initialized
ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_bss_fw, 0xffffffff80758a00, 0) error 1
ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffffffff80758ab0, 0) error 1
ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffffffff80758b60, 0) error 1
iwi_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
iwi_bss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_bss_fw, 0xffffffff807781d0, 0) error 1
iwi_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
iwi_ibss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_ibss_fw, 0xffffffff80778280, 0) error 1
iwi_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
iwi_monitor: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_monitor_fw, 0xffffffff80778330, 0) error 1
random: entropy device external interface
wlan: mac acl policy registered
kbd1 at kbdmux0
WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0.
efirtc0: <EFI Realtime Clock>
efirtc0: registered as a time-of-day clock, resolution 1.000000s
netgate0: <unknown hardware>
netgate0: version: 0.1
smbios0: <System Management BIOS> at iomem 0xf05e0-0xf05fe
smbios0: Version: 2.8, BCD Revision: 2.8
acpi0: <ALASKA A M I >
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
Event timer "HPET4" frequency 14318180 Hz quality 440
Event timer "HPET5" frequency 14318180 Hz quality 440
Event timer "HPET6" frequency 14318180 Hz quality 440
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x5000-0x503f mem 0xa7c00000-0xa7ffffff,0xb0000000-0xbfffffff irq 16 at device 2.0 on pci0
vgapci0: Boot video device
hdac0: <Intel Haswell HDA Controller> mem 0xa8214000-0xa8217fff irq 16 at device 3.0 on pci0
xhci0: <Intel Panther Point USB 3.0 controller> mem 0xa8200000-0xa820ffff irq 21 at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
xhci0: Port routing mask set to 0xffffffff
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pci0: <simple comms> at device 22.0 (no driver attached)
hdac1: <Intel Lynx Point-LP HDA Controller> mem 0xa8210000-0xa8213fff irq 22 at device 27.0 on pci0
pcib1: <ACPI PCI-PCI bridge> irq 18 at device 28.0 on pci0
pci1: <ACPI PCI bus> on pcib1
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x4000-0x40ff mem 0xa8104000-0xa8104fff,0xa8100000-0xa8103fff irq 18 at device 0.0 on pci1
re0: Using 1 MSI-X message
re0: turning off MSI enable bit.
re0: Chip rev. 0x54000000
re0: MAC rev. 0x00100000
miibus0: <MII bus> on re0
rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0
rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: 00:e0:4c:33:1f:c4
re0: netmap queues/slots: TX 1/256, RX 1/256
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
pci2: <ACPI PCI bus> on pcib2
re1: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x3000-0x30ff mem 0xa8004000-0xa8004fff,0xa8000000-0xa8003fff irq 16 at device 0.0 on pci2
re1: Using 1 MSI-X message
re1: turning off MSI enable bit.
re1: Chip rev. 0x54000000
re1: MAC rev. 0x00100000
miibus1: <MII bus> on re1
rgephy1: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus1
rgephy1: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re1: Using defaults for TSO: 65518/35/2048
re1: Ethernet address: 00:e0:4c:33:1f:c5
re1: netmap queues/slots: TX 1/256, RX 1/256
ehci0: <Intel Lynx Point-LP USB 2.0 controller> mem 0xa821a000-0xa821a3ff irq 23 at device 29.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
usbus1: 480Mbps High Speed USB v2.0
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Lynx Point-LP AHCI SATA controller> port 0x50b0-0x50b7,0x50a0-0x50a3,0x5090-0x5097,0x5080-0x5083,0x5060-0x507f mem 0xa8219000-0xa82197ff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.30 with 2 6Gbps ports, Port Multiplier not supported
ahcich1: <AHCI channel> at channel 1 on ahci0
acpi_button0: <Sleep Button> on acpi0
acpi_button1: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
uart: ns8250: UART FCR is broken
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart: ns8250: UART FCR is broken
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
cpufreq0: <CPU frequency control> on cpu0
cpufreq1: <CPU frequency control> on cpu1
Timecounter "TSC" frequency 1396766502 Hz quality 1000
Timecounters tick every 1.000 msec
ugen1.1: <Intel EHCI root HUB> at usbus1
ugen0.1: <Intel XHCI root HUB> at usbus0
uhub0 on usbus1
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
uhub1 on usbus0
uhub1: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
hdacc0: <Intel Haswell HDA CODEC> at cad 0 on hdac0
hdaa0: <Intel Haswell Audio Function Group> at nid 1 on hdacc0
pcm0: <Intel Haswell (HDMI/DP 8ch)> at nid 3 on hdaa0
hdacc1: <Realtek ALC662 rev3 HDA CODEC> at cad 0 on hdac1
hdaa1: <Realtek ALC662 rev3 Audio Function Group> at nid 1 on hdacc1
pcm1: <Realtek ALC662 rev3 (Rear Analog)> at nid 20 and 24 on hdaa1
Trying to mount root from zfs:pfSense/ROOT/default []...
ada0 at ahcich1 bus 0 scbus0 target 0 lun 0
ada0: <SSD 32GB Q0927A> ACS-2 ATA SATA 3.x device
ada0: Serial Number 2021011201184
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
ada0: Command Queueing enabled
ada0: 30029MB (61500000 512 byte sectors)
uhub1: 13 ports with 13 removable, self powered
uhub0: 2 ports with 2 removable, self powered
ugen0.2: <vendor 0x1a40 USB 2.0 Hub> at usbus0
uhub2 on uhub1
uhub2: <vendor 0x1a40 USB 2.0 Hub, class 9/0, rev 2.00/1.11, addr 1> on usbus0
Root mount waiting for: usbus0 usbus1
ugen1.2: <vendor 0x8087 product 0x8000> at usbus1
uhub3 on uhub0
uhub3: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.04, addr 2> on usbus1
uhub2: 4 ports with 4 removable, self powered
uhub3: 8 ports with 8 removable, self powered
ugen0.3: <vendor 0x04f3 product 0x0103> at usbus0
ukbd0 on uhub1
ukbd0: <vendor 0x04f3 product 0x0103, class 0/0, rev 1.10/1.07, addr 2> on usbus0
kbd2 at ukbd0
uhid0 on uhub1
uhid0: <vendor 0x04f3 product 0x0103, class 0/0, rev 1.10/1.07, addr 2> on usbus0
CPU: Intel(R) Celeron(R) 2955U @ 1.40GHz (1396.77-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x40651 Family=0x6 Model=0x45 Stepping=1
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x4ddaebbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,XSAVE,OSXSAVE,RDRAND>
AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
AMD Features2=0x21<LAHF,ABM>
Structured Extended Features=0x2603<FSGSBASE,TSCADJ,ERMS,INVPCID,NFPUSG>
Structured Extended Features3=0x9c000600<MCUOPT,MD_CLEAR,IBPB,STIBP,L1DFL,SSBD>
XSAVE Features=0x1<XSAVEOPT>
VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
TSC: P-state invariant, performance statistics
ichsmb0: <Intel Lynx Point-LP SMBus controller> port 0x5040-0x505f mem 0xa8218000-0xa82180ff irq 18 at device 31.3 on pci0
smbus0: <System Management Bus> on ichsmb0
wg0: changing name to 'tun_wg0'
tun_wg0: link state changed to UP
re0: link state changed to UP
re1: link state changed to UP
re0: link state changed to DOWN
lo0: link state changed to UP
re1: link state changed to DOWN
pflog0: promiscuous mode enabled
re0: link state changed to UP
re1: link state changed to UP
tun_wg0: link state changed to DOWN
wg0: changing name to 'tun_wg0'
tun_wg0: link state changed to UP
ugen0.3: <vendor 0x04f3 product 0x0103> at usbus0 (disconnected)
ukbd0: at uhub1, port 3, addr 2 (disconnected)
ukbd0: detached
uhid0: at uhub1, port 3, addr 2 (disconnected)
uhid0: detached
tun_wg0: link state changed to DOWN
pflog0: promiscuous mode disabled
Waiting (max 60 seconds) for system processvnlru' to stop... done Waiting (max 60 seconds) for system processsyncer' to stop...
Syncing disks, vnodes remaining... 0 0 done
All buffers synced.
Uptime: 9m13s
uhub3: detached
uhub0: detached
re1: link state changed to DOWN
re1: link state changed to UP
re0: link state changed to DOWN -
This is the next boot, after creating loader.conf.local with the two lines :
---<<BOOT>>---
Copyright (c) 1992-2024 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 15.0-CURRENT #21 RELENG_2_8_1-n256095-47c932dcc0e9: Thu Aug 28 16:27:48 UTC 2025
root@pfsense-build-release-amd64-1.eng.atx.netgate.com:/var/jenkins/workspace/pfSense-CE-snapshots-2_8_1-main/obj/amd64/AupY3aTL/var/jenkins/workspace/pfSense-CE-snapshots-2_8_1-main/sources/FreeBSD-src-RELENG_2_8_1/amd64.amd64/sys/pfSense amd64
FreeBSD clang version 19.1.5 (https://github.com/llvm/llvm-project.git llvmorg-19.1.5-0-gab4b5a2db582)
VT(efifb): resolution 800x600
CPU: Intel(R) Celeron(R) 2955U @ 1.40GHz (1396.86-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x40651 Family=0x6 Model=0x45 Stepping=1
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x4ddaebbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,XSAVE,OSXSAVE,RDRAND>
AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
AMD Features2=0x21<LAHF,ABM>
Structured Extended Features=0x2603<FSGSBASE,TSCADJ,ERMS,INVPCID,NFPUSG>
XSAVE Features=0x1<XSAVEOPT>
VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
TSC: P-state invariant, performance statistics
real memory = 4294967296 (4096 MB)
avail memory = 3987218432 (3802 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <ALASKA A M I >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
random: unblocking device.
WARNING: Bogus Interrupt Trigger Mode. Assume CONFORMS.
WARNING: Bogus Interrupt Trigger Mode. Assume CONFORMS.
ioapic0 <Version 2.0> irqs 0-39
Launching APs: 1
TCP_ratelimit: Is now initialized
ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_bss_fw, 0xffffffff80758a00, 0) error 1
ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffffffff80758ab0, 0) error 1
ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffffffff80758b60, 0) error 1
iwi_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
iwi_bss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_bss_fw, 0xffffffff807781d0, 0) error 1
iwi_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
iwi_ibss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_ibss_fw, 0xffffffff80778280, 0) error 1
iwi_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
iwi_monitor: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_monitor_fw, 0xffffffff80778330, 0) error 1
random: entropy device external interface
wlan: mac acl policy registered
kbd1 at kbdmux0
WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0.
efirtc0: <EFI Realtime Clock>
efirtc0: registered as a time-of-day clock, resolution 1.000000s
netgate0: <unknown hardware>
netgate0: version: 0.1
smbios0: <System Management BIOS> at iomem 0xf05e0-0xf05fe
smbios0: Version: 2.8, BCD Revision: 2.8
acpi0: <ALASKA A M I >
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
Event timer "HPET4" frequency 14318180 Hz quality 440
Event timer "HPET5" frequency 14318180 Hz quality 440
Event timer "HPET6" frequency 14318180 Hz quality 440
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x5000-0x503f mem 0xa7c00000-0xa7ffffff,0xb0000000-0xbfffffff irq 16 at device 2.0 on pci0
vgapci0: Boot video device
hdac0: <Intel Haswell HDA Controller> mem 0xa8214000-0xa8217fff irq 16 at device 3.0 on pci0
xhci0: <Intel Panther Point USB 3.0 controller> mem 0xa8200000-0xa820ffff irq 21 at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
xhci0: Port routing mask set to 0xffffffff
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pci0: <simple comms> at device 22.0 (no driver attached)
hdac1: <Intel Lynx Point-LP HDA Controller> mem 0xa8210000-0xa8213fff irq 22 at device 27.0 on pci0
pcib1: <ACPI PCI-PCI bridge> irq 18 at device 28.0 on pci0
pci1: <ACPI PCI bus> on pcib1
re0: <Realtek PCIe GbE Family Controller> port 0x4000-0x40ff mem 0xa8104000-0xa8104fff,0xa8100000-0xa8103fff irq 18 at device 0.0 on pci1
re0: Using Memory Mapping!
re0: Using 1 MSI-X message
re0: version:1.100.00
re0: Ethernet address: 00:e0:4c:33:1f:c4This product is covered by one or more of the following patents:
US6,570,884, US6,115,776, and US6,327,625.
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: 00:e0:4c:33:1f:c4
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
pci2: <ACPI PCI bus> on pcib2
re1: <Realtek PCIe GbE Family Controller> port 0x3000-0x30ff mem 0xa8004000-0xa8004fff,0xa8000000-0xa8003fff irq 16 at device 0.0 on pci2
re1: Using Memory Mapping!
re1: Using 1 MSI-X message
re1: version:1.100.00
re1: Ethernet address: 00:e0:4c:33:1f:c5This product is covered by one or more of the following patents:
US6,570,884, US6,115,776, and US6,327,625.
re1: Using defaults for TSO: 65518/35/2048
re1: Ethernet address: 00:e0:4c:33:1f:c5
ehci0: <Intel Lynx Point-LP USB 2.0 controller> mem 0xa821a000-0xa821a3ff irq 23 at device 29.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
usbus1: 480Mbps High Speed USB v2.0
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Lynx Point-LP AHCI SATA controller> port 0x50b0-0x50b7,0x50a0-0x50a3,0x5090-0x5097,0x5080-0x5083,0x5060-0x507f mem 0xa8219000-0xa82197ff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.30 with 2 6Gbps ports, Port Multiplier not supported
ahcich1: <AHCI channel> at channel 1 on ahci0
acpi_button0: <Sleep Button> on acpi0
acpi_button1: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
uart: ns8250: UART FCR is broken
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart: ns8250: UART FCR is broken
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
cpufreq0: <CPU frequency control> on cpu0
cpufreq1: <CPU frequency control> on cpu1
Timecounter "TSC" frequency 1396766503 Hz quality 1000
Timecounters tick every 1.000 msec
ugen0.1: <Intel XHCI root HUB> at usbus0
ugen1.1: <Intel EHCI root HUB> at usbus1
uhub0 on usbus0
uhub1 on usbus1
uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
hdacc0: <Intel Haswell HDA CODEC> at cad 0 on hdac0
hdaa0: <Intel Haswell Audio Function Group> at nid 1 on hdacc0
pcm0: <Intel Haswell (HDMI/DP 8ch)> at nid 3 on hdaa0
hdacc1: <Realtek ALC662 rev3 HDA CODEC> at cad 0 on hdac1
hdaa1: <Realtek ALC662 rev3 Audio Function Group> at nid 1 on hdacc1
pcm1: <Realtek ALC662 rev3 (Rear Analog)> at nid 20 and 24 on hdaa1
Trying to mount root from zfs:pfSense/ROOT/default []...
ada0 at ahcich1 bus 0 scbus0 target 0 lun 0
ada0: <SSD 32GB Q0927A> ACS-2 ATA SATA 3.x device
ada0: Serial Number 2021011201184
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
ada0: Command Queueing enabled
ada0: 30029MB (61500000 512 byte sectors)
uhub0: 13 ports with 13 removable, self powered
uhub1: 2 ports with 2 removable, self powered
ugen0.2: <vendor 0x1a40 USB 2.0 Hub> at usbus0
uhub2 on uhub0
uhub2: <vendor 0x1a40 USB 2.0 Hub, class 9/0, rev 2.00/1.11, addr 1> on usbus0
Root mount waiting for: usbus0 usbus1
ugen1.2: <vendor 0x8087 product 0x8000> at usbus1
uhub3 on uhub1
uhub3: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.04, addr 2> on usbus1
uhub2: 4 ports with 4 removable, self powered
uhub3: 8 ports with 8 removable, self powered
CPU: Intel(R) Celeron(R) 2955U @ 1.40GHz (1396.77-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x40651 Family=0x6 Model=0x45 Stepping=1
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x4ddaebbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,XSAVE,OSXSAVE,RDRAND>
AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
AMD Features2=0x21<LAHF,ABM>
Structured Extended Features=0x2603<FSGSBASE,TSCADJ,ERMS,INVPCID,NFPUSG>
Structured Extended Features3=0x9c000600<MCUOPT,MD_CLEAR,IBPB,STIBP,L1DFL,SSBD>
XSAVE Features=0x1<XSAVEOPT>
VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
TSC: P-state invariant, performance statistics
ichsmb0: <Intel Lynx Point-LP SMBus controller> port 0x5040-0x505f mem 0xa8218000-0xa82180ff irq 18 at device 31.3 on pci0
smbus0: <System Management Bus> on ichsmb0
wg0: changing name to 'tun_wg0'
tun_wg0: link state changed to UP
lo0: link state changed to UP
re0: link state changed to UP
re1: link state changed to UP
pflog0: promiscuous mode enabled
tun_wg0: link state changed to DOWN
wg0: changing name to 'tun_wg0'
tun_wg0: link state changed to UP
Limiting ICMPv6 destination unreachable output from 109 to 99 packets/sec -
And this is dmesg after deleting the loader.conf.local file. Sorry for reposts, the previous dmesg showed many boots, but this last time, only the last boot, so I got confused and took me a while to make sense out of all those dmesg outputs.
---<<BOOT>>---
Copyright (c) 1992-2024 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 15.0-CURRENT #21 RELENG_2_8_1-n256095-47c932dcc0e9: Thu Aug 28 16:27:48 UTC 2025
root@pfsense-build-release-amd64-1.eng.atx.netgate.com:/var/jenkins/workspace/pfSense-CE-snapshots-2_8_1-main/obj/amd64/AupY3aTL/var/jenkins/workspace/pfSense-CE-snapshots-2_8_1-main/sources/FreeBSD-src-RELENG_2_8_1/amd64.amd64/sys/pfSense amd64
FreeBSD clang version 19.1.5 (https://github.com/llvm/llvm-project.git llvmorg-19.1.5-0-gab4b5a2db582)
VT(efifb): resolution 800x600
CPU: Intel(R) Celeron(R) 2955U @ 1.40GHz (1396.81-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x40651 Family=0x6 Model=0x45 Stepping=1
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x4ddaebbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,XSAVE,OSXSAVE,RDRAND>
AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
AMD Features2=0x21<LAHF,ABM>
Structured Extended Features=0x2603<FSGSBASE,TSCADJ,ERMS,INVPCID,NFPUSG>
XSAVE Features=0x1<XSAVEOPT>
VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
TSC: P-state invariant, performance statistics
real memory = 4294967296 (4096 MB)
avail memory = 3989311488 (3804 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <ALASKA A M I >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
random: unblocking device.
WARNING: Bogus Interrupt Trigger Mode. Assume CONFORMS.
WARNING: Bogus Interrupt Trigger Mode. Assume CONFORMS.
ioapic0 <Version 2.0> irqs 0-39
Launching APs: 1
TCP_ratelimit: Is now initialized
ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_bss_fw, 0xffffffff80758a00, 0) error 1
ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffffffff80758ab0, 0) error 1
ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffffffff80758b60, 0) error 1
iwi_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
iwi_bss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_bss_fw, 0xffffffff807781d0, 0) error 1
iwi_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
iwi_ibss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_ibss_fw, 0xffffffff80778280, 0) error 1
iwi_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
iwi_monitor: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_monitor_fw, 0xffffffff80778330, 0) error 1
random: entropy device external interface
wlan: mac acl policy registered
kbd1 at kbdmux0
WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0.
efirtc0: <EFI Realtime Clock>
efirtc0: registered as a time-of-day clock, resolution 1.000000s
netgate0: <unknown hardware>
netgate0: version: 0.1
smbios0: <System Management BIOS> at iomem 0xf05e0-0xf05fe
smbios0: Version: 2.8, BCD Revision: 2.8
acpi0: <ALASKA A M I >
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
Event timer "HPET4" frequency 14318180 Hz quality 440
Event timer "HPET5" frequency 14318180 Hz quality 440
Event timer "HPET6" frequency 14318180 Hz quality 440
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x5000-0x503f mem 0xa7c00000-0xa7ffffff,0xb0000000-0xbfffffff irq 16 at device 2.0 on pci0
vgapci0: Boot video device
hdac0: <Intel Haswell HDA Controller> mem 0xa8214000-0xa8217fff irq 16 at device 3.0 on pci0
xhci0: <Intel Panther Point USB 3.0 controller> mem 0xa8200000-0xa820ffff irq 21 at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
xhci0: Port routing mask set to 0xffffffff
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pci0: <simple comms> at device 22.0 (no driver attached)
hdac1: <Intel Lynx Point-LP HDA Controller> mem 0xa8210000-0xa8213fff irq 22 at device 27.0 on pci0
pcib1: <ACPI PCI-PCI bridge> irq 18 at device 28.0 on pci0
pci1: <ACPI PCI bus> on pcib1
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x4000-0x40ff mem 0xa8104000-0xa8104fff,0xa8100000-0xa8103fff irq 18 at device 0.0 on pci1
re0: Using 1 MSI-X message
re0: turning off MSI enable bit.
re0: Chip rev. 0x54000000
re0: MAC rev. 0x00100000
miibus0: <MII bus> on re0
rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0
rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: 00:e0:4c:33:1f:c4
re0: netmap queues/slots: TX 1/256, RX 1/256
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
pci2: <ACPI PCI bus> on pcib2
re1: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x3000-0x30ff mem 0xa8004000-0xa8004fff,0xa8000000-0xa8003fff irq 16 at device 0.0 on pci2
re1: Using 1 MSI-X message
re1: turning off MSI enable bit.
re1: Chip rev. 0x54000000
re1: MAC rev. 0x00100000
miibus1: <MII bus> on re1
rgephy1: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus1
rgephy1: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re1: Using defaults for TSO: 65518/35/2048
re1: Ethernet address: 00:e0:4c:33:1f:c5
re1: netmap queues/slots: TX 1/256, RX 1/256
ehci0: <Intel Lynx Point-LP USB 2.0 controller> mem 0xa821a000-0xa821a3ff irq 23 at device 29.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
usbus1: 480Mbps High Speed USB v2.0
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Lynx Point-LP AHCI SATA controller> port 0x50b0-0x50b7,0x50a0-0x50a3,0x5090-0x5097,0x5080-0x5083,0x5060-0x507f mem 0xa8219000-0xa82197ff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.30 with 2 6Gbps ports, Port Multiplier not supported
ahcich1: <AHCI channel> at channel 1 on ahci0
acpi_button0: <Sleep Button> on acpi0
acpi_button1: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
uart: ns8250: UART FCR is broken
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart: ns8250: UART FCR is broken
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
cpufreq0: <CPU frequency control> on cpu0
cpufreq1: <CPU frequency control> on cpu1
Timecounter "TSC" frequency 1396766529 Hz quality 1000
Timecounters tick every 1.000 msec
ugen1.1: <Intel EHCI root HUB> at usbus1
ugen0.1: <Intel XHCI root HUB> at usbus0
uhub0 on usbus1
uhub1 on usbus0
uhub1: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
hdacc0: <Intel Haswell HDA CODEC> at cad 0 on hdac0
hdaa0: <Intel Haswell Audio Function Group> at nid 1 on hdacc0
pcm0: <Intel Haswell (HDMI/DP 8ch)> at nid 3 on hdaa0
hdacc1: <Realtek ALC662 rev3 HDA CODEC> at cad 0 on hdac1
hdaa1: <Realtek ALC662 rev3 Audio Function Group> at nid 1 on hdacc1
pcm1: <Realtek ALC662 rev3 (Rear Analog)> at nid 20 and 24 on hdaa1
Trying to mount root from zfs:pfSense/ROOT/default []...
ada0 at ahcich1 bus 0 scbus0 target 0 lun 0
ada0: <SSD 32GB Q0927A> ACS-2 ATA SATA 3.x device
ada0: Serial Number 2021011201184
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
ada0: Command Queueing enabled
ada0: 30029MB (61500000 512 byte sectors)
uhub1: 13 ports with 13 removable, self powered
uhub0: 2 ports with 2 removable, self powered
ugen0.2: <vendor 0x1a40 USB 2.0 Hub> at usbus0
uhub2 on uhub1
uhub2: <vendor 0x1a40 USB 2.0 Hub, class 9/0, rev 2.00/1.11, addr 1> on usbus0
Root mount waiting for: usbus0 usbus1
ugen1.2: <vendor 0x8087 product 0x8000> at usbus1
uhub3 on uhub0
uhub3: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.04, addr 2> on usbus1
uhub2: 4 ports with 4 removable, self powered
uhub3: 8 ports with 8 removable, self powered
CPU: Intel(R) Celeron(R) 2955U @ 1.40GHz (1396.77-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x40651 Family=0x6 Model=0x45 Stepping=1
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x4ddaebbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,XSAVE,OSXSAVE,RDRAND>
AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
AMD Features2=0x21<LAHF,ABM>
Structured Extended Features=0x2603<FSGSBASE,TSCADJ,ERMS,INVPCID,NFPUSG>
Structured Extended Features3=0x9c000600<MCUOPT,MD_CLEAR,IBPB,STIBP,L1DFL,SSBD>
XSAVE Features=0x1<XSAVEOPT>
VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
TSC: P-state invariant, performance statistics
ichsmb0: <Intel Lynx Point-LP SMBus controller> port 0x5040-0x505f mem 0xa8218000-0xa82180ff irq 18 at device 31.3 on pci0
smbus0: <System Management Bus> on ichsmb0
wg0: changing name to 'tun_wg0'
tun_wg0: link state changed to UP
re0: link state changed to UP
re1: link state changed to UP
re0: link state changed to DOWN
lo0: link state changed to UP
re1: link state changed to DOWN
pflog0: promiscuous mode enabled
re0: link state changed to UP
re1: link state changed to UP
re0: link state changed to DOWN
re0: link state changed to UP
tun_wg0: link state changed to DOWN
wg0: changing name to 'tun_wg0'
tun_wg0: link state changed to UP -
Hmm, nothing obvious there then. Both NICs link UP OK using both drivers.
I would disable the on-board audio hardware since that only consuming resources but it's unlikely to be causing this.
Anything in the system log after boot when using the alternative driver?
-
@stephenw10 I tried to look into system.log, but since we rebooted many times, I'm not sure what to look for. The log is rather long for this morning.
-
Just stating the obvious that the
wg0flaps immediately precede and immediately follow the multiple Realtek NIC flaps.@GTA_doum Is the Wireguard package installed on the system at the first site?
-
@tinfoilmatt Tes, both sites have WireGuard installed. It is used occasionaly by users being outside of the office.
-
So what exactly failed after enabling the new driver? DHCP fails for LAN clients?
