Watchguard Firebox M400/M500
-
@korenchkin .... Alright, thank you very much for the clarification, it really did help.
I did the flashing and tested it. I restart it by the serial console and the web interface, both worked as was hoping for.
A little reading with your comment about efi it help a lot.anyway, a quick question if i may. Before the flashing ME91, i was checking the bios and i saw that the image re-flash for the ME was disable, so i enable it, just in case.
Q: should i disable it back?
thanks one more time...
-
Normally you set that and it applies to the following boot only and will automatically go back to disabled.
Out of interest I found I didn't need to set that to update the ME. Moving the jumper was sufficient.
-
@jriofrio nice,glad it worked,for both of you i guess :)
I think now you know same as me,so treat your bios as yours,you have it updated,you will not update it again i guess,so maybe it will help against malware to have it disabled... -
I should add that, as predicted, after updating the ME my i3-4160 successfully reboots. For the first time in like 7 years. Amazing!
-
@stephenw10 ....
... Glad to hear it... It feels good when everything works as it should. -
I was not experiencing reboot issues, but my OCD kicked in so I followed the process ...
https://forum.netgate.com/topic/124734/watchguard-firebox-m400-m500/588
... and applied the ME update via AFUDOS.EXE /ME and all went well. Maybe there are other benefits of ME 9.1.40.1000
-
@Mookatroid ah,a fellow flashaholic :)
-
@korenchkin LMAO
-
Well you'd better upgrade your CPU to take advantage of it then.
-
Already ordered
Intel Xeon E3-1265L V3 LGA-1150 CPU Processor 2.50 GHz 4-Core 8MB 45W GPU P4600
Same CPU I installed in my previous M400.
But delivery will take bit with the CPU coming from across the pond.
