Install 2.4.2 on Lanner NCA-1210

Kit

I am trying to install pfSense-CE-memstick-serial-2.4.2-RELEASE-amd64.img
on Lanner NCA-1210. I tried the rufus or win32diskimager to burn the image on a USB flash drive. after booting the device, I got the following message.

Reboot and Select proper Boot device
or Insert Boot Media in selected Boot device and press a key

I then insert the USB flash drive on another working pfsense type the following command

gpart set -a active da0

I put the USB drive back to the Lanner NCA-1210. The system able to boot the USB drive but stopped at mountroot>

Thank you for any suggestions.

–------------------------------------------------------------------------------

uhub0: <intel 1="" 9="" ehci="" root="" hub,="" class="" 0,="" rev="" 2.00="" 1.00,="" addr="">on usbus0
uhub0: 8 ports with 8 removable, self powered
ugen0.2: <vendor 0x8087="" product="" 0x07db="">at usbus0
uhub1 on uhub0
uhub1: <vendor 2="" 9="" 0x8087="" product="" 0x07db,="" class="" 0,="" rev="" 2.00="" 0.02,="" addr="">on usbus0
uhub1: 4 ports with 4 removable, self powered
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <stt fpn032c2rm="" 1.104.07="">ACS-2 ATA SATA 3.x device
ada0: Serial Number S983553-FQPB-827H003
ada0: 600.000MB/s transfers (SATA 3.x, UDMA5, PIO 512bytes)
ada0: Command Queueing enabled
ada0: 28626MB (58626288 512 byte sectors)
Trying to mount root from ufs:/dev/ufs/FreeBSD_Install [ro,noatime]…
Root mount waiting for: usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
ugen0.3: <unknown>at usbus0 (disconnected)
mountroot: waiting for device /dev/ufs/FreeBSD_Install...
Mounting from ufs:/dev/ufs/FreeBSD_Install failed with error 19.

Loader variables:
vfs.root.mountfrom=ufs:/dev/ufs/FreeBSD_Install
vfs.root.mountfrom.options=ro,noatime

Manual root filesystem specification:
<fstype>: <device>[options]
Mount <device>using filesystem <fstype>and with the specified (optional) option list.

eg. ufs:/dev/da0s1a
zfs:tank
cd9660:/dev/cd0 ro
(which is equivalent to: mount -t cd9660 -o ro /dev/cd0 /)

? List valid disk boot devices
. Yield 1 second (for background tasks)
<empty line="">Abort manual input

mountroot></empty></fstype></device></device></fstype></unknown></stt></vendor></vendor></intel>

conor

on your usb memstick what is the contents of /boot/loader.conf

You may need to explicitily set a value there to:
vfs.root.mountfrom="ufs:/dev/da0a"