[FIXED] Traffic Shaping Issues
-
Hi All,
I've setup traffic shaping but, I'm really not sure I've done it correctly.
See my Rules.png attachment for the rules floating. There set to the interface(LAN & WAN) in each rule.
But when I look at the queue status, only the lan queue qOthersHigh is getting use and I know for sure that TeamSpeak will have inbound traffic too.Have I get this setup correctly?
Also when using a Static NAT, the state looks the wrong way round? Should the top state, Dest and Source be the other way round? (See screenshot states.PNG)
I have the same queues on LAN as I do on WAN.
Should I scrap the queues and rules and rerun the wizard? I configured it way back in 2.3.2 or something like that and went to check it today, and thought "that doesn't look right".
Hope you guys can help
Jonny
-
Gotten even weirder now.
See screenshot. How's it gone over 1.4GBit?
EDIT: Problem fixed with https://github.com/pfsense/pfsense/commit/6b54c8a4d39bbc32ea5c542c0ed9d2bcabbd1077
Just the getting traffic in the right queues left.
-
Problem has been solved. Issue was with the catch rule at the bottom.
Removed it, set the default queue in the shaper and boom working correctly. -
For floating rules, catch all should be at the top. For normal rules, catch all should be at the bottom.