PfSense + TL-SG1016PE LACP Config
-
Hi Guys,
Is anyone familiar with those TP-Link Easy Smart Switches?
I have spent a couple of hours and did not manage to configure the LACP and pass VLAN through it.
TL-SG1016PE SW has very poor config settings (Screenshot: https://www.dropbox.com/s/x5400fdzr45oar7/Capture.PNG?dl=0)The setup is as follows:
2 NICs of the pfsense device configured as LACP LAGG.
Interfaces Screenshot: https://www.dropbox.com/s/e52vfhog3wkt4ng/Capture2.PNG?dl=0pfSense Device: https://www.aliexpress.com/item/4-Ethernet-RJ-45-Lan-Ports-Mini-PC-Celeron-J1800-Dual-Cores-2-41Ghz-Pfsense-Firewall/32810774479.html?spm=a2g0s.9042311.0.0.cWYeiY
Switch: TL-SG1016PEThank you in advance for the help!
-
It seems that switch does not support LACP, only static LAG. You'll have to set up pfsense accordingly. ('Load balance' option IIRC)
-
Hi AndyC,
That was the case, thanks!