Dual WAN PPTP+Static, only Failover, not working traffic on wan1.

[sharonna]

Hello

I have set up a dual wan config with failover (only failover, no balancing).

If i use 2 static wans, alle went fine, but with pptp as wan1 i have a big problem:
If i set the Lan any rule to point at the Wan1 > Wan2 pool gateway, nothing is working, means internet is down from the lan pcs, even ping is not going, but from the pfsense ping in webinterface it works.
If i set the Lan any rule to point at the Wan2 > Wan1 pool gateway, all is working.
If i set the Lan any rule to point at the default gateway, all is working fine and traffic goes over wan1.

My config:
Static Routes:
http://img84.imageshack.us/img84/4769/01312009131750ej8.jpg

Firewall Rules LAN:
http://img516.imageshack.us/img516/1955/01312009131928vb9.jpg

Firewall Rules WAN:
http://img516.imageshack.us/img516/6325/01312009131958pu5.jpg

Load Balancer:
http://img516.imageshack.us/img516/3851/01312009132020wp5.jpg
1 pool removed at screenshot time, i dont need this anyway, only want Wan1 > wan2 failover.
For Info: there is not standing wan and opt1, because these produces arp errors in log, as find on the forum edited it to old style and they where gone.

WAN Config:
http://img140.imageshack.us/img140/5302/01312009132117zr2.jpg

WAN2 Config:
http://img156.imageshack.us/img156/3936/01312009132446hn4.jpg

LAN Config:
http://img156.imageshack.us/img156/4374/01312009132500bm1.jpg

Status Interfaces:
http://img217.imageshack.us/img217/8949/01312009132555vo8.jpg

NAT config:
Outbound: Automatic outbound NAT rule generation (IPsec passthrough)
1:1: Nothing set.

Would be nice if anyone has an idea, Thanks in advance!