LAN Network Cable Unplugged
-
A few weeks ago it took me at least 45 minutes to realize that my laptop has a 100 mbit nic, and the firewall a 10 mbit one :o
I wonder why that didn't work ;D
-
Either your Switch/Hub or your Networkcards must do something wrong or are missconfigured. A 100mbit NIC should fall back to 10 mbit by doing autonegotiation (unless this setting was set not to autonegotiate). However, some older cheap switches/hubs don't support 10 mbit and are 100 mbit only.
-
I think this would be a good time to post my question since we talking about switchs and wiring.
I'm doing a bit of an upgrade, I'm buying a new computer with a gigabit lan card. Also i'll purchase a gigabit card for my pfSense bsdbox to use as the lan interface and finally I should get a gigabit switch. What I want to know is this the other computers on the network are still using 100 Mb cards, how would the switch operate with this? will it switch at 100 to everyone or 1000 to me and 100 to everyone else?
-
See http://faq.pfsense.com/index.php?sid=18033&lang=en&action=artikel&cat=10&id=38&artlang=en&highlight=hidden where you can override your speed/duplex.
Be VERY CAREFUL when doing this, we don't include these options for a reason.
-
I think this would be a good time to post my question since we talking about switchs and wiring.
I'm doing a bit of an upgrade, I'm buying a new computer with a gigabit lan card. Also i'll purchase a gigabit card for my pfSense bsdbox to use as the lan interface and finally I should get a gigabit switch. What I want to know is this the other computers on the network are still using 100 Mb cards, how would the switch operate with this? will it switch at 100 to everyone or 1000 to me and 100 to everyone else?
All Gigabitswitches I know of can do 10/100/1000 autonegotiation, so the answer is yes, a 10 mbit client runs at 10 mbit, 100 at 100 and 1000 at 1000. The switch takes care of "translating" to different speeds.
-
I think this would be a good time to post my question since we talking about switchs and wiring.
I'm doing a bit of an upgrade, I'm buying a new computer with a gigabit lan card. Also i'll purchase a gigabit card for my pfSense bsdbox to use as the lan interface and finally I should get a gigabit switch. What I want to know is this the other computers on the network are still using 100 Mb cards, how would the switch operate with this? will it switch at 100 to everyone or 1000 to me and 100 to everyone else?
While that will work, why a gig link to the pfsense box? Unless you have more then one gig interface (physical or virtual) on the firewall it seems kind of useless, or unless you have two or more 100Mb interfaces that you're routing to from the gig interface at their capacity.
-
Maybe he wants a faster WebGui ;D
-
nah not really.. Manily for bandwidth management + squid.
squid cache hits on the pfSense box are shaped (if enabled). I figured if I use HFSC to guarantee full bandwidth (link speed) for 300ms to http traffic, then I may be able to get away from the limitations of the shaping for a short period of time. with the 1000 M interface the pfSense box should be able to push out more data within that period of time and probably do so very efficiently to several 100 M interfaces. If its a cache miss then I think all requesting interfaces have to compete for the real isp supplied bandwith (I suppose).
After that curcial 300 ms window the realtime kicks in to throttle the traffic. Its all theoretical i'm not sure if this will work. -
nah not really.. Manily for bandwidth management + squid.
squid cache hits on the pfSense box are shaped (if enabled). I figured if I use HFSC to guarantee full bandwidth (link speed) for 300ms to http traffic, then I may be able to get away from the limitations of the shaping for a short period of time. with the 1000 M interface the pfSense box should be able to push out more data within that period of time and probably do so very efficiently to several 100 M interfaces. If its a cache miss then I think all requesting interfaces have to compete for the real isp supplied bandwith (I suppose).
Yeah but unless you have a few thousand machines, there's no way you'll ever exceed 100 Mb in that scenario.
-
@cmb:
Yeah but unless you have a few thousand machines, there's no way you'll ever exceed 100 Mb in that scenario.
or a few large cache files. ;)