Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    Squid errors

    Scheduled Pinned Locked Moved pfSense Packages
    60 Posts 17 Posters 43.0k Views
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • J
      jeroen234
      last edited by

      these steps you need to take to get squid 2.5.12 from the pfsense packages working with pfsense beta 1

      
pfSense console setup
8)  Shell

mkdir /var/squid
chown squid:squid /var/squid
mkdir /var/squid/logs
chown squid:squid /var/squid/logs
mkdir /var/squid/cache
chown squid:squid /var/squid/cache
mkdir /usr/local/etc/squid/advanced
chown squid:squid /usr/local/etc/squid/advanced
mkdir /usr/local/etc/squid/advanced/acls
chown squid:squid /usr/local/etc/squid/advanced/acls
touch /usr/local/etc/squid/advanced/acls/src_subnets.acl
chown squid:squid /usr/local/etc/squid/advanced/acls/src_subnets.acl
touch /usr/local/etc/squid/advanced/acls/src_unrestricted_ip.acl
chown squid:squid /usr/local/etc/squid/advanced/acls/src_unrestricted_ip.acl
squid -z
exit

pfSense console setup
11)  Restart webConfigurator

now config in pfsense browser
http://ipadress/pkg_edit.php?xml=squid_ng.xml&id=0

go back to consul
pfSense console setup
8)  Shell

squid
ps -ax | grep squid

if you see somving like this :
 4683  ??  Ss     0:00.00 squid
 4685  ??  S      0:00.19 (squid) (squid)
 4695  p0  S+     0:00.01 grep squid

squid is running
      1 Reply Last reply Reply Quote 0
      • R
        rexster
        last edited by

        ok now squid runs fine.

        still one problem.
        how do i make it automatically start on each boot?

        btw… one more issue...
        even that squid does run, when i check the access.log file,
        i only see access to http://my.ip.address
        and all access to the internet doesn showed up there.

        is this normal?

        tnx
        rex

        http://www.GoBlogLah.com

        1 Reply Last reply Reply Quote 0
        • H
          hoba
          last edited by

          Try starting it by using the hidden xml-options for the config.xml: http://faq.pfsense.com/index.php?sid=18492&lang=en&action=artikel&cat=10&id=38&artlang=en&highlight=hidden

          This of course won't be needed later when the package is final.

          1 Reply Last reply Reply Quote 0
          • R
            rexster
            last edited by

            can you explain more detailed…
            exactly, what to put into config.xml, where to put it?

            few issue i found:
            transparent proxy doesnt seem to work (yet) ?
            and proxy also refuse https protocol?

            tnx
            rex

            http://www.GoBlogLah.com

            1 Reply Last reply Reply Quote 0
            • J
              jeroen234
              last edited by

              here transparent proxy for poort 80 works but only with 3128 as squid poort on pfsense 
              the log is on /var/squid/logs/access.log

              
10.141.254.1 - - [07/Jan/2006:09:32:23 +0100] "GET http://forum.pfsense.org/favicon.ico HTTP/1.1" 404 483 TCP_NEGATIVE_HIT:NONE
10.141.254.1 - - [07/Jan/2006:09:32:24 +0100] "GET http://www.imageshack.us/iframe.php?txtcolor=111111&type=blank HTTP/1.1" 200 1211 TCP_MISS:DIRECT
10.141.254.1 - - [07/Jan/2006:09:32:24 +0100] "GET http://forum.pfsense.org/favicon.ico HTTP/1.1" 404 483 TCP_NEGATIVE_HIT:NONE
10.141.254.1 - - [07/Jan/2006:09:34:06 +0100] "GET http://checkip.dyndns.org/ HTTP/1.0" 200 264 TCP_MISS:DIRECT
10.141.254.1 - - [07/Jan/2006:09:39:09 +0100] "GET http://checkip.dyndns.org/ HTTP/1.0" 200 264 TCP_MISS:DIRECT

              check /var/squid/logs/cache.log for squid errors

              to start squid from config.xml:
              add <shellcmd>squid</shellcmd> to config.xml
              look at the code below for where to put it

              
 <system><optimization>normal</optimization>
	<hostname>pfsense</hostname>
	<domain>wlelystad.homeip.net</domain>
	<username>admin</username>
	<password>$1$.Qr5mty/$FZsZiYnpLMX1fs3VPAJpq1</password>
	<timezone>Europe/Amsterdam</timezone>
	<time-update-interval>300</time-update-interval>
	<timeservers>pool.ntp.org</timeservers>
	 <webgui><protocol>http</protocol>
		 <certificate><private-key><port>10000</port></private-key></certificate></webgui> 
	<enablesshd>yes</enablesshd>

	 <maximumstates><dnsallowoverride><dnsserver><dnsserver><shellcmd>squid</shellcmd></dnsserver></dnsserver></dnsallowoverride></maximumstates></system>
              1 Reply Last reply Reply Quote 0
              • S
                sullrich
                last edited by

                @jeroen234:

                these steps you need to take to get squid 2.5.12 from the pfsense packages working with pfsense beta 1

                
pfSense console setup
8)  Shell

mkdir /var/squid
chown squid:squid /var/squid
mkdir /var/squid/logs
chown squid:squid /var/squid/logs
mkdir /var/squid/cache
chown squid:squid /var/squid/cache
mkdir /usr/local/etc/squid/advanced
chown squid:squid /usr/local/etc/squid/advanced
mkdir /usr/local/etc/squid/advanced/acls
chown squid:squid /usr/local/etc/squid/advanced/acls
touch /usr/local/etc/squid/advanced/acls/src_subnets.acl
chown squid:squid /usr/local/etc/squid/advanced/acls/src_subnets.acl
touch /usr/local/etc/squid/advanced/acls/src_unrestricted_ip.acl
chown squid:squid /usr/local/etc/squid/advanced/acls/src_unrestricted_ip.acl
squid -z
exit

pfSense console setup
11)  Restart webConfigurator

now config in pfsense browser
http://ipadress/pkg_edit.php?xml=squid_ng.xml&id=0

go back to consul
pfSense console setup
8)  Shell

squid
ps -ax | grep squid

if you see somving like this :
 4683  ??  Ss     0:00.00 squid
 4685  ??  S      0:00.19 (squid) (squid)
 4695  p0  S+     0:00.01 grep squid

squid is running

                I just updated the squid INIT code to include this.  Please test again!

                1 Reply Last reply Reply Quote 0
                • S
                  sullrich
                  last edited by

                  @sullrich:

                  This actually was a server error.  Or package sync script stopped copying changes from CVS.

                  At any rate, everything is fixed now and the squid stuff should be on the latest version on the server now.

                  Speaking of this, we had yet another problem syncing packages.  Please try squid again, I've fixed a ton of errors and made sure that it is sycning.

                  Out of the box squid starts now for me.  Please let me know if this is not the case for anyone else, I really want squid working for 1.0.

                  1 Reply Last reply Reply Quote 0
                  • S
                    Schnuffel
                    last edited by

                    Hi @all!

                    I've tried to use the captive portal together with squid in transparent mode. The captive portal was running before without any errors, but after I have installed squid I've got a lot of errors and squid refused the connection to any server on the wan-side.
                    Well, I've read the squid docs and faqs and there I've found, it isn't possible to run squid in transparent mode with authentification by acl, ldap and so on.
                    Now my question: Is it possible to run squid together with a captive portal?

                    Thanks and so long
                    Schnuffel

                    1 Reply Last reply Reply Quote 0
                    • J
                      jeroen234
                      last edited by

                      i uninstalled squid
                      removed leftovers
                      installed squid again
                      its now working direct for me

                      by the way if you select any of the Authentication settings on squid then squid breeks 
                      the squid auth files are missing
                      had to reinstall squid to get squid working again afther that

                      
Warning: Unknown(/usr/local/pkg/squid_auth.inc): failed to open stream: No such file or directory in /usr/local/www/pkg_edit.php(164) : 
eval()'d code on line 1 Fatal error: (null)(): Failed opening required '/usr/local/pkg/squid_auth.inc' 
(include_path='.:/etc/inc:/usr/local/www:/usr/local/captiveportal') in /usr/local/www/pkg_edit.php(164) : eval()'d code on line 1

                      only inc file i have in /usr/local/pkg is squid_ng.inc
                      the rest are xml files

                      @sullrich:

                      @jeroen234:

                      these steps you need to take to get squid 2.5.12 from the pfsense packages working with pfsense beta 1

                      
pfSense console setup
8)  Shell

mkdir /var/squid
chown squid:squid /var/squid
mkdir /var/squid/logs
chown squid:squid /var/squid/logs
mkdir /var/squid/cache
chown squid:squid /var/squid/cache
mkdir /usr/local/etc/squid/advanced
chown squid:squid /usr/local/etc/squid/advanced
mkdir /usr/local/etc/squid/advanced/acls
chown squid:squid /usr/local/etc/squid/advanced/acls
touch /usr/local/etc/squid/advanced/acls/src_subnets.acl
chown squid:squid /usr/local/etc/squid/advanced/acls/src_subnets.acl
touch /usr/local/etc/squid/advanced/acls/src_unrestricted_ip.acl
chown squid:squid /usr/local/etc/squid/advanced/acls/src_unrestricted_ip.acl
squid -z
exit

pfSense console setup
11)  Restart webConfigurator

now config in pfsense browser
http://ipadress/pkg_edit.php?xml=squid_ng.xml&id=0

go back to consul
pfSense console setup
8)  Shell

squid
ps -ax | grep squid

if you see somving like this :
 4683  ??  Ss     0:00.00 squid
 4685  ??  S      0:00.19 (squid) (squid)
 4695  p0  S+     0:00.01 grep squid

squid is running

                      I just updated the squid INIT code to include this.  Please test again!

                      1 Reply Last reply Reply Quote 0
                      • J
                        joeri
                        last edited by

                        Did a clean install on VMware and installed the SQUID package.
                        As far as i can see it seams to be working.
                        I enabled logging in the web gui but the log can only be viewed from the shell.

                        • Only set logging and i saw requests.
                            Set the captive portal and that didn't work anymore :(

                        • Then set tranparted proxy delete the logs
                            Captive portal loggin page was working again but u could not get webpages.

                        • disabled captive portal and got requests in the logfiles.

                        I take it that the requests showing up ib the logfile indicate squid is working.

                        1 Reply Last reply Reply Quote 0
                        • S
                          sullrich
                          last edited by

                          @jeroen234:

                          
Warning: Unknown(/usr/local/pkg/squid_auth.inc): failed to open stream: No such file or directory in /usr/local/www/pkg_edit.php(164) : 
eval()'d code on line 1 Fatal error: (null)(): Failed opening required '/usr/local/pkg/squid_auth.inc' 
(include_path='.:/etc/inc:/usr/local/www:/usr/local/captiveportal') in /usr/local/www/pkg_edit.php(164) : eval()'d code on line 1

                          I just updated squid_ng.xml to include squid_auth.inc.  Deinstall the package and reinstall.  Hoepfully this one is fixed now.

                          1 Reply Last reply Reply Quote 0
                          • J
                            jeroen234
                            last edited by

                            well that one is gone but…...

                            it is replaced by this one

                            
Fatal error: Call to undefined function: global_eval_auth_options() in /usr/local/www/pkg_edit.php(164) : eval()'d code on line 1
                            1 Reply Last reply Reply Quote 0
                            • S
                              sullrich
                              last edited by

                              More errors fixed.  Please deinstall and reinstall the package and let me know if that error goes away.

                              1 Reply Last reply Reply Quote 0
                              • C
                                charles.regan
                                last edited by

                                oh oh!!!  :o

                                Just installed the package… no more connection possible, everything is blocked !? No more WebGUI
                                Maybe Squid is not working with a loadbalance setup ?

                                I've put back a config.xml from yesterday now inet works, but I can't access the webgui.. that's the only thing now...

                                When i type:

                                lighttpd

                                /libexec/ld-elf.so.1: Shared object "libpcre.so.0" not found, required by "lighttpd"

                                hmm, how to fix this ?

                                1 Reply Last reply Reply Quote 0
                                • S
                                  sullrich
                                  last edited by

                                  That happens when you uininstall a package however I don't recall that happening to Squid.

                                  This bug is fixed in beta2, we need the package information for lighty in /var/db/ otherwise it won't work.

                                  To fix it, do this from a shell:

                                  pkg_add -r ftp://ftp2.freebsd.org/pub/FreeBSD/ports/i386/packages-6-stable/All/lighttpd-1.4.8.tbz

                                  Then exit out to the menu and run option 11.

                                  1 Reply Last reply Reply Quote 0
                                  • S
                                    sullrich
                                    last edited by

                                    Sorry, that's what I get for answering emails when I first awake.  I modified the original message.

                                    pkg_add -r

                                    1 Reply Last reply Reply Quote 0
                                    • C
                                      charles.regan
                                      last edited by

                                      Squid is not working for me.

                                      Deleted SQUID, deleted all squid entries in config.xml
                                      Reinstalled SQUID

                                      Now all connection goes to 127.0.0.1:3128 when i check pftop
                                      But no webpage loads on the browser.

                                      Error log in cache.log
                                      2006/01/09 20:12:10| WARNING: Cannot run '/usr/local/libexec/squid/dnsserver' process.
                                      2006/01/09 20:12:10| Accepting HTTP connections at 10.0.0.1, port 3128, FD 8.
                                      2006/01/09 20:12:10| Accepting ICP messages at 0.0.0.0, port 3130, FD 9.
                                      2006/01/09 20:12:10| Accepting HTCP messages on port 4827, FD 11.
                                      2006/01/09 20:12:10| Accepting SNMP messages on port 3401, FD 13.
                                      2006/01/09 20:12:10| WCCP Disabled.
                                      2006/01/09 20:12:10| commBind: Cannot bind socket FD 14 to 127.0.0.1:0: (49) Can't assign requested address
                                      2006/01/09 20:12:10| commBind: Cannot bind socket FD 14 to 127.0.0.1:0: (49) Can't assign requested address
                                      2006/01/09 20:12:10| ipcCreate: Failed to create child FD.
                                      2006/01/09 20:12:10| Loaded Icons.
                                      2006/01/09 20:12:10| eventCleanup
                                      2006/01/09 20:12:10| Ready to serve requests.

                                      I don't have a loopback address…

                                      ping 127.0.0.1

                                      PING 127.0.0.1 (127.0.0.1): 56 data bytes
                                      ping: sendto: Can't assign requested address

                                      EDIT: my loopback is only IPv6 why?
                                      ifconfig
                                      lo0: flags=8048 <loopback,running,multicast>mtu 16384
                                              inet6 ::1 prefixlen 128
                                              inet6 fe80::1%lo0 prefixlen 64 scopeid 0x7

                                      What can I do to make it work?

                                      thanks</loopback,running,multicast>

                                      1 Reply Last reply Reply Quote 0
                                      • S
                                        sullrich
                                        last edited by

                                        Rebooting will most likely fix this.  The loopback bug is fixed in beta2.

                                        1 Reply Last reply Reply Quote 0
                                        • L
                                          Leoandru
                                          last edited by

                                          Well I installed squid and it works fine only one problem.. My traffic shaping for Http no longer works. http traffic is pushed into the default queue. well I got to figure this out later but I guess if I change squid to port 80 it should be back on track.

                                          1 Reply Last reply Reply Quote 0
                                          • L
                                            Leoandru
                                            last edited by

                                            @Leoandru:

                                            well I got to figure this out later but I guess if I change squid to port 80 it should be back on track.

                                            well that didnt work!

                                            1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post
                                            Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.