DHCPs assign wrong pools
-
ok, so what will happen if one cables of the bridge interface is removed?
all other interfaces go down? -
As of right now it appears so. The freebsd bridge porter/author is looking into this.. I brought it to his attention yesteday.
-
cool, then I hope that is going to be resolved…
So then I will keep playing woth captice portal now, since im gtting some problems there too...
-
What Captive Portal problems are you running into? Seems to work great for me.
-
yea it was warking fine for me too but then just stoped working..
Symptoms: When I open the web page it doesnt go anywhere… altough IP address and DNS is assigned properly. Also cant ping 4.2.2.2 (Major DNS)
I tryed to renew IP adress and nothing works...
I dont know what happaned, but now im sturting the config from defults, and I'll see if I can get the same problem
-
I just did everything from defult, but its not working now…
Here are my steps for captive portal:
1. Assign LAN2 (Sis2) the ip address 192.168.2.1
2. Add DHCP for LAN2, pool 192.168.2.10-192.168.2.100, DNS 4.2.2.2
3. Firewall rules for LAN2 Any to Any
4. Captive portal, for LAN2, all defults, Diabled MAC filteringWhtat did i do wrong?
-
Reboot the firewall. Captive portal doesn't always take effect do so some kernel wierdness.
-
rebooted, didnt work…?
how can i troublestoot here?
What are the requirements and steps to get captive portal running? -
you probably should start a new thread. the topic you are talking about now has nothing to do with original start of the discussion and I think 5 pages are already enough for this one.
-
ok
-
here is the Captive portal topic
http://forum.pfsense.org/index.php?topic=490.msg3076#msg3076