Dyndns update problem on 1.0-BETA1-TESTING-SNAPSHOT-2-5-06
-
My hardware WARP
First boot i can see dyndns in log normal but when i disconnect an reconnet then i see nothing in log from Dyndns. (Dyndns.org)
-
Just speculating what it says does nothing for us. Show us the log snippets.
-
OK Here the systemlog
Here the log after reboot.
Feb 8 18:26:22 last message repeated 2 times
Feb 8 18:26:22 php: : Not installing nat reflection rules for a port range > 500
Feb 8 18:26:12 login: login on console as root
Feb 8 18:26:10 php: : Resyncing configuration for all packages.
Feb 8 18:26:08 pftpx[912]: listening on 127.0.0.1 port 8021
Feb 8 18:26:08 pftpx[912]: listening on 127.0.0.1 port 8021
Feb 8 18:26:06 mpd: [pt15] using interface ng16
Feb 8 18:26:06 mpd: [pt15] ppp node is "mpd855-pt15"
Feb 8 18:26:06 mpd: [pt14] using interface ng15
Feb 8 18:26:06 mpd: [pt14] ppp node is "mpd855-pt14"
Feb 8 18:26:06 mpd: [pt13] using interface ng14
Feb 8 18:26:06 mpd: [pt13] ppp node is "mpd855-pt13"
Feb 8 18:26:06 mpd: [pt12] using interface ng13
Feb 8 18:26:06 mpd: [pt12] ppp node is "mpd855-pt12"
Feb 8 18:26:06 mpd: [pt11] using interface ng12
Feb 8 18:26:05 mpd: [pt11] ppp node is "mpd855-pt11"
Feb 8 18:26:05 mpd: [pt10] using interface ng11
Feb 8 18:26:05 mpd: [pt10] ppp node is "mpd855-pt10"
Feb 8 18:26:05 mpd: [pt9] using interface ng10
Feb 8 18:26:05 mpd: [pt9] ppp node is "mpd855-pt9"
Feb 8 18:26:05 mpd: [pt8] using interface ng9
Feb 8 18:26:05 mpd: [pt8] ppp node is "mpd855-pt8"
Feb 8 18:26:05 mpd: [pt7] using interface ng8
Feb 8 18:26:05 mpd: [pt7] ppp node is "mpd855-pt7"
Feb 8 18:26:05 mpd: [pt6] using interface ng7
Feb 8 18:26:05 mpd: [pt6] ppp node is "mpd855-pt6"
Feb 8 18:26:05 mpd: [pt5] using interface ng6
Feb 8 18:26:05 mpd: [pt5] ppp node is "mpd855-pt5"
Feb 8 18:26:05 mpd: [pt4] using interface ng5
Feb 8 18:26:05 mpd: [pt4] ppp node is "mpd855-pt4"
Feb 8 18:26:05 mpd: [pt3] using interface ng4
Feb 8 18:26:05 mpd: [pt3] ppp node is "mpd855-pt3"
Feb 8 18:26:05 mpd: [pt2] using interface ng3
Feb 8 18:26:05 mpd: [pt2] ppp node is "mpd855-pt2"
Feb 8 18:26:05 mpd: [pt1] using interface ng2
Feb 8 18:26:05 mpd: [pt1] ppp node is "mpd855-pt1"
Feb 8 18:26:03 mpd: [pt0] using interface ng1
Feb 8 18:26:03 mpd: mpd: local IP address for PPTP is 0.0.0.0
Feb 8 18:26:03 mpd: [pt0] ppp node is "mpd855-pt0"
Feb 8 18:26:03 mpd: mpd: pid 855, version 3.18 (root@builder.livebsd.com 21:39 5-Feb-2006)
Feb 8 18:26:02 dhcpd: For info, please visit http://www.isc.org/sw/dhcp/
Feb 8 18:26:02 dhcpd: All rights reserved.
Feb 8 18:26:02 dhcpd: Copyright 2004-2005 Internet Systems Consortium.
Feb 8 18:26:02 dhcpd: Internet Systems Consortium DHCP Server V3.0.3
Feb 8 18:26:01 php: : phpDynDNS: (Success) IP Address Changed Successfully! (87.78.45.153)
Feb 8 18:25:59 php: : phpDynDNS: updating cache file /cf/conf/dyndns.cache: 87.78.45.153
Feb 8 18:25:59 php: : DynDns: Current Service: dyndns
Feb 8 18:25:59 php: : DynDns: DynDns _checkStatus() starting.
Feb 8 18:25:58 php: : DynDns: DynDns _update() starting.
Feb 8 18:25:58 php: : DynDns: cacheIP != wan_ip. Updating.
Feb 8 18:25:58 php: : DynDns: Cached IP: 87.78.47.237
Feb 8 18:25:57 php: : DynDns: Current WAN IP: 87.78.45.153
Feb 8 18:25:57 php: : DynDns: _detectChange() starting.
Feb 8 18:25:57 php: : DynDns: updatedns() starting
Feb 8 18:25:57 php: : DynDns: Running updatedns()
Feb 8 18:25:43 last message repeated 2 times
Feb 8 18:25:57 dnsmasq[820]: using nameserver 213.168.112.60#53
Feb 8 18:25:57 dnsmasq[820]: reading /etc/resolv.conf
Feb 8 18:25:57 dnsmasq[820]: read /etc/hosts - 4 addresses
Feb 8 18:25:57 dnsmasq[820]: started, version 2.22 cachesize 150
Feb 8 18:25:43 php: : Not installing nat reflection rules for a port range > 500
Feb 8 18:25:42 kernel: pflog0: promiscuous mode enabled
Feb 8 18:25:41 kernel: sis0: promiscuous mode enabled
Feb 8 18:25:41 kernel: ath0: promiscuous mode enabled
Feb 8 18:25:40 kernel: bridge0: Ethernet address: ac
48:2c:e9:13
Feb 8 18:25:19 php: : Hotplug event detected for sis2 but ignoring since interface is not set for DHCP
Feb 8 18:25:14 php: : DEVD Ethernet attached event for sis1
Feb 8 18:25:11 mpd: [pppoe] IFACE: Up event
Feb 8 18:25:10 mpd: [pppoe] exec: /usr/local/sbin/ppp-linkup ng0 inet 87.78.45.153 195.14.247.95 nc-xxxxx@netcologne.de dns1 213.168.112.60
Feb 8 18:25:10 mpd: [pppoe] exec: /sbin/route add 0.0.0.0 195.14.247.95
Feb 8 18:25:10 mpd: [pppoe] exec: /sbin/route add 87.78.45.153 -iface lo0
Feb 8 18:25:10 mpd: [pppoe] exec: /sbin/ifconfig ng0 87.78.45.153 195.14.247.95 netmask 0xffffffff -link0
Feb 8 18:25:10 mpd: [pppoe] setting interface ng0 MTU to 1492 bytes
Feb 8 18:25:10 mpd: [pppoe] IFACE: Up event
Feb 8 18:25:10 mpd: 87.78.45.153 -> 195.14.247.95
Feb 8 18:25:10 mpd: [pppoe] IPCP: LayerUp
Feb 8 18:25:10 mpd: [pppoe] IPCP: state change Ack-Sent –> Opened
Feb 8 18:25:10 mpd: PRIDNS 213.168.112.60
Feb 8 18:25:10 mpd: IPADDR 87.78.45.153
Feb 8 18:25:10 mpd: [pppoe] IPCP: rec'd Configure Ack #3 link 0 (Ack-Sent)
Feb 8 18:25:10 mpd: [pppoe] IPCP: state change Req-Sent –> Ack-Sent
Feb 8 18:25:10 mpd: IPADDR 195.14.247.95
Feb 8 18:25:10 mpd: [pppoe] IPCP: SendConfigAck #204
Feb 8 18:25:10 mpd: 195.14.247.95 is OK
Feb 8 18:25:10 mpd: IPADDR 195.14.247.95
Feb 8 18:25:10 mpd: [pppoe] IPCP: rec'd Configure Request #204 link 0 (Req-Sent)
Feb 8 18:25:10 mpd: PRIDNS 213.168.112.60
Feb 8 18:25:10 mpd: IPADDR 87.78.45.153
Feb 8 18:25:10 mpd: [pppoe] IPCP: SendConfigReq #3
Feb 8 18:25:10 mpd: PRIDNS 213.168.112.60
Feb 8 18:25:10 mpd: 87.78.45.153 is OK
Feb 8 18:25:10 mpd: IPADDR 87.78.45.153
Feb 8 18:25:10 mpd: [pppoe] IPCP: rec'd Configure Nak #2 link 0 (Req-Sent)
Feb 8 18:25:10 mpd: PRIDNS 0.0.0.0
Feb 8 18:25:10 mpd: IPADDR 0.0.0.0
Feb 8 18:25:10 mpd: [pppoe] IPCP: SendConfigReq #2
Feb 8 18:25:10 mpd: COMPPROTO VJCOMP, 16 comp. channels, no comp-cid
Feb 8 18:25:10 mpd: [pppoe] IPCP: rec'd Configure Reject #1 link 0 (Req-Sent)
Feb 8 18:25:10 mpd: PRIDNS 0.0.0.0
Feb 8 18:25:10 mpd: COMPPROTO VJCOMP, 16 comp. channels, no comp-cid
Feb 8 18:25:10 mpd: IPADDR 0.0.0.0
Feb 8 18:25:10 mpd: [pppoe] IPCP: SendConfigReq #1
Feb 8 18:25:10 mpd: [pppoe] IPCP: state change Starting –> Req-Sent
Feb 8 18:25:10 mpd: [pppoe] IPCP: Up event
Feb 8 18:25:10 mpd: [pppoe] up: 1 link, total bandwidth 64000 bps
Feb 8 18:25:10 mpd: [pppoe] setting interface ng0 MTU to 1492 bytes
Feb 8 18:25:10 mpd: [pppoe] LCP: phase shift AUTHENTICATE –> NETWORK
Feb 8 18:25:10 mpd: [pppoe] LCP: authorization successful
Feb 8 18:25:10 mpd: [pppoe] PAP: rec'd ACK #1
Feb 8 18:25:10 mpd: [pppoe] LCP: LayerUp
Feb 8 18:25:10 mpd: [pppoe] PAP: sending REQUEST
Feb 8 18:25:10 mpd: [pppoe] PAP: using authname "nc-xxxxx@netcologne.de"
Feb 8 18:25:10 mpd: [pppoe] LCP: auth: peer wants PAP, I want nothing
Feb 8 18:25:10 mpd: [pppoe] LCP: phase shift ESTABLISH –> AUTHENTICATE
Feb 8 18:25:10 mpd: [pppoe] LCP: state change Ack-Sent –> Opened
Feb 8 18:25:10 mpd: MAGICNUM be6a0b40
Feb 8 18:25:10 mpd: MRU 1492
Feb 8 18:25:10 mpd: [pppoe] LCP: rec'd Configure Ack #1 link 0 (Ack-Sent)
Feb 8 18:25:10 mpd: [pppoe] LCP: state change Req-Sent –> Ack-Sent
Feb 8 18:25:10 mpd: MAGICNUM 2e2e9ee1
Feb 8 18:25:10 mpd: AUTHPROTO PAP
Feb 8 18:25:10 mpd: MRU 1492
Feb 8 18:25:10 mpd: [pppoe] LCP: SendConfigAck #170
Feb 8 18:25:10 mpd: MAGICNUM 2e2e9ee1
Feb 8 18:25:10 mpd: AUTHPROTO PAP
Feb 8 18:25:10 mpd: MRU 1492
Feb 8 18:25:10 mpd: [pppoe] LCP: rec'd Configure Request #170 link 0 (Req-Sent)
Feb 8 18:25:10 php: : Hotplug event detected for sis0 but ignoring since interface is not set for DHCP
Feb 8 18:25:09 mpd: MAGICNUM be6a0b40
Feb 8 18:25:09 mpd: MRU 1492
Feb 8 18:25:09 mpd: [pppoe] LCP: SendConfigReq #1
Feb 8 18:25:09 mpd: [pppoe] LCP: phase shift DEAD –> ESTABLISH
Feb 8 18:25:09 mpd: [pppoe] LCP: state change Starting –> Req-Sent
Feb 8 18:25:09 mpd: [pppoe] LCP: Up event
Feb 8 18:25:09 mpd: [pppoe] link: origination is local
Feb 8 18:25:09 mpd: [pppoe] link: UP event
Feb 8 18:25:09 mpd: [pppoe] device is now in state UP
Feb 8 18:25:09 mpd: [pppoe] device: UP event in state OPENING
Feb 8 18:25:09 mpd: [pppoe] PPPoE connection successful
Feb 8 18:25:09 mpd: [pppoe] rec'd ACNAME "netdsl"
Feb 8 18:25:09 mpd: [pppoe] device is now in state OPENING
Feb 8 18:25:09 mpd: [pppoe] device: OPEN event in state DOWN
Feb 8 18:25:09 mpd: [pppoe] LCP: LayerStart
Feb 8 18:25:09 mpd: [pppoe] LCP: state change Initial –> Starting
Feb 8 18:25:09 mpd: [pppoe] LCP: Open event
Feb 8 18:25:09 mpd: [pppoe] link: OPEN event
Feb 8 18:25:09 mpd: [pppoe] opening link "pppoe"…
Feb 8 18:25:09 mpd: [pppoe] bundle: OPEN event in state CLOSED
Feb 8 18:25:09 mpd: [pppoe] IPCP: LayerStart
Feb 8 18:25:09 mpd: [pppoe] IPCP: state change Initial –> Starting
Feb 8 18:25:08 mpd: [pppoe] IPCP: Open event
Feb 8 18:25:08 mpd: [pppoe] IFACE: Open event
Feb 8 18:25:08 mpd: [pppoe] IPCP: peer address cannot be zero
Feb 8 18:25:08 mpd: [pppoe] using interface ng0
fsense mpd: [pppoe] /sbin/ifconfig sis1 uplog after disconnect and new reconnect
Feb 8 18:31:56 sshd[1517]: Accepted keyboard-interactive/pam for admin from 192.168.0.200 port 2060 ssh2
Feb 8 18:29:53 mpd: [pppoe] IFACE: Up event
Feb 8 18:29:53 mpd: [pppoe] exec: /usr/local/sbin/ppp-linkup ng0 inet 87.78.46.236 195.14.247.95 nc-xxxxxx@netcologne.de dns1 213.168.112.60
Feb 8 18:29:52 mpd: [pppoe] exec: /sbin/route add 0.0.0.0 195.14.247.95
Feb 8 18:29:52 mpd: [pppoe] exec: /sbin/route add 87.78.46.236 -iface lo0
Feb 8 18:29:52 mpd: [pppoe] exec: /sbin/ifconfig ng0 87.78.46.236 195.14.247.95 netmask 0xffffffff -link0
Feb 8 18:29:52 mpd: [pppoe] setting interface ng0 MTU to 1492 bytes
Feb 8 18:29:52 mpd: [pppoe] IFACE: Up event
Feb 8 18:29:52 mpd: 87.78.46.236 -> 195.14.247.95
Feb 8 18:29:52 mpd: [pppoe] IPCP: LayerUp
Feb 8 18:29:52 mpd: [pppoe] IPCP: state change Ack-Rcvd –> Opened
Feb 8 18:29:52 mpd: IPADDR 195.14.247.95
Feb 8 18:29:52 mpd: [pppoe] IPCP: SendConfigAck #241
Feb 8 18:29:52 mpd: 195.14.247.95 is OK
Feb 8 18:29:52 mpd: IPADDR 195.14.247.95
Feb 8 18:29:52 mpd: [pppoe] IPCP: rec'd Configure Request #241 link 0 (Ack-Rcvd)
Feb 8 18:29:52 mpd: [pppoe] IPCP: state change Req-Sent –> Ack-Rcvd
Feb 8 18:29:52 mpd: PRIDNS 213.168.112.60
Feb 8 18:29:52 mpd: IPADDR 87.78.46.236
Feb 8 18:29:52 mpd: [pppoe] IPCP: rec'd Configure Ack #7 link 0 (Req-Sent)
Feb 8 18:29:52 mpd: PRIDNS 213.168.112.60
Feb 8 18:29:52 mpd: IPADDR 87.78.46.236
Feb 8 18:29:52 mpd: [pppoe] IPCP: SendConfigReq #7
Feb 8 18:29:52 mpd: PRIDNS 213.168.112.60
Feb 8 18:29:52 mpd: 87.78.46.236 is OK
Feb 8 18:29:52 mpd: IPADDR 87.78.46.236
Feb 8 18:29:52 mpd: [pppoe] IPCP: rec'd Configure Nak #6 link 0 (Req-Sent)
Feb 8 18:29:52 mpd: PRIDNS 0.0.0.0
Feb 8 18:29:52 mpd: IPADDR 0.0.0.0
Feb 8 18:29:52 mpd: [pppoe] IPCP: SendConfigReq #6
Feb 8 18:29:52 mpd: COMPPROTO VJCOMP, 16 comp. channels, no comp-cid
Feb 8 18:29:52 mpd: [pppoe] IPCP: rec'd Configure Reject #5 link 0 (Req-Sent)
Feb 8 18:29:52 mpd: PRIDNS 0.0.0.0
Feb 8 18:29:52 mpd: COMPPROTO VJCOMP, 16 comp. channels, no comp-cid
Feb 8 18:29:52 mpd: IPADDR 0.0.0.0
Feb 8 18:29:52 mpd: [pppoe] IPCP: SendConfigReq #5
Feb 8 18:29:52 mpd: [pppoe] IPCP: state change Starting –> Req-Sent
Feb 8 18:29:52 mpd: [pppoe] IPCP: Up event
Feb 8 18:29:52 mpd: [pppoe] up: 1 link, total bandwidth 64000 bps
Feb 8 18:29:52 mpd: [pppoe] setting interface ng0 MTU to 1492 bytes
Feb 8 18:29:52 mpd: [pppoe] LCP: phase shift AUTHENTICATE –> NETWORK
Feb 8 18:29:52 mpd: [pppoe] LCP: authorization successful
Feb 8 18:29:52 mpd: [pppoe] PAP: rec'd ACK #1
Feb 8 18:29:51 mpd: [pppoe] LCP: LayerUp
Feb 8 18:29:51 mpd: [pppoe] PAP: sending REQUEST
Feb 8 18:29:51 mpd: [pppoe] PAP: using authname "nc-xxxxxx@netcologne.de"
Feb 8 18:29:51 mpd: [pppoe] LCP: auth: peer wants PAP, I want nothing
Feb 8 18:29:51 mpd: [pppoe] LCP: phase shift ESTABLISH –> AUTHENTICATE
Feb 8 18:29:51 mpd: [pppoe] LCP: state change Ack-Sent –> Opened
Feb 8 18:29:51 mpd: MAGICNUM bf66b577
Feb 8 18:29:51 mpd: MRU 1492
Feb 8 18:29:51 mpd: [pppoe] LCP: rec'd Configure Ack #3 link 0 (Ack-Sent)
Feb 8 18:29:51 mpd: [pppoe] LCP: state change Req-Sent –> Ack-Sent
Feb 8 18:29:51 mpd: MAGICNUM 13dbcedd
Feb 8 18:29:51 mpd: AUTHPROTO PAP
Feb 8 18:29:51 mpd: MRU 1492
Feb 8 18:29:51 mpd: [pppoe] LCP: SendConfigAck #86
Feb 8 18:29:51 mpd: MAGICNUM 13dbcedd
Feb 8 18:29:51 mpd: AUTHPROTO PAP
Feb 8 18:29:51 mpd: MRU 1492
Feb 8 18:29:51 mpd: [pppoe] LCP: rec'd Configure Request #86 link 0 (Req-Sent)
Feb 8 18:29:51 mpd: MAGICNUM bf66b577
Feb 8 18:29:51 mpd: MRU 1492
Feb 8 18:29:51 mpd: [pppoe] LCP: SendConfigReq #3
Feb 8 18:29:51 mpd: [pppoe] LCP: phase shift DEAD –> ESTABLISH
Feb 8 18:29:51 mpd: [pppoe] LCP: state change Starting –> Req-Sent
Feb 8 18:29:51 mpd: [pppoe] LCP: Up event
Feb 8 18:29:51 mpd: [pppoe] link: origination is local
Feb 8 18:29:51 mpd: [pppoe] link: UP event
Feb 8 18:29:51 mpd: [pppoe] device is now in state UP
Feb 8 18:29:51 mpd: [pppoe] device: UP event in state OPENING
Feb 8 18:29:51 mpd: [pppoe] PPPoE connection successful
Feb 8 18:29:51 mpd: [pppoe] rec'd ACNAME "netdsl"
Feb 8 18:29:51 mpd: [pppoe] device is now in state OPENING
Feb 8 18:29:51 mpd: [pppoe] device: OPEN event in state DOWN
Feb 8 18:29:51 mpd: [pppoe] LCP: Open event
Feb 8 18:29:51 mpd: [pppoe] link: OPEN event
Feb 8 18:29:51 mpd: [pppoe] LCP: LayerStart
Feb 8 18:29:51 mpd: [pppoe] LCP: state change Initial –> Starting
Feb 8 18:29:51 mpd: [pppoe] LCP: Open event
Feb 8 18:29:51 mpd: [pppoe] link: OPEN event
Feb 8 18:29:51 mpd: [pppoe] opening link "pppoe"…
Feb 8 18:29:51 mpd: [pppoe] bundle: OPEN event in state OPENED
Feb 8 18:29:51 mpd: [pppoe] opening link "pppoe"…
Feb 8 18:29:51 mpd: [pppoe] bundle: OPEN event in state CLOSED
Feb 8 18:29:51 mpd: [pppoe] IPCP: LayerStart
Feb 8 18:29:51 mpd: [pppoe] IPCP: state change Initial –> Starting
Feb 8 18:29:51 mpd: [pppoe] IPCP: Open event
Feb 8 18:29:51 mpd: [pppoe] rec'd signal usr1, opening
Feb 8 18:29:25 mpd: [pppoe] LCP: phase shift ESTABLISH –> DEAD
Feb 8 18:29:25 mpd: [pppoe] LCP: state change Closed –> Initial
Feb 8 18:29:25 mpd: [pppoe] LCP: Down event
Feb 8 18:29:25 mpd: [pppoe] link: DOWN event
Feb 8 18:29:25 mpd: [pppoe] device is now in state DOWN
Feb 8 18:29:25 mpd: [pppoe] device: DOWN event in state CLOSING
Feb 8 18:29:25 mpd: [pppoe] device is now in state CLOSING
Feb 8 18:29:25 mpd: [pppoe] device: CLOSE event in state UP
Feb 8 18:29:25 mpd: [pppoe] LCP: LayerFinish
Feb 8 18:29:25 mpd: [pppoe] LCP: phase shift TERMINATE –> ESTABLISH
Feb 8 18:29:25 mpd: [pppoe] LCP: state change Closing –> Closed
Feb 8 18:29:25 mpd: [pppoe] LCP: rec'd Terminate Ack #2 link 0 (Closing)
Feb 8 18:29:25 mpd: [pppoe] LCP: Close event
Feb 8 18:29:25 mpd: [pppoe] link: CLOSE event
Feb 8 18:29:25 mpd: [pppoe] LCP: LayerDown
Feb 8 18:29:25 mpd: [pppoe] LCP: SendTerminateReq #2
Feb 8 18:29:25 mpd: [pppoe] closing link "pppoe"…
Feb 8 18:29:25 mpd: [pppoe] IPCP: state change Closed –> Initial
Feb 8 18:29:25 mpd: [pppoe] IPCP: Down event
Feb 8 18:29:25 mpd: [pppoe] up: 0 links, total bandwidth 9600 bps
Feb 8 18:29:25 mpd: [pppoe] setting interface ng0 MTU to 1500 bytes
Feb 8 18:29:25 mpd: [pppoe] LCP: phase shift NETWORK –> TERMINATE
Feb 8 18:29:25 mpd: [pppoe] LCP: state change Opened –> Closing
Feb 8 18:29:25 mpd: [pppoe] LCP: Close event
Feb 8 18:29:25 mpd: [pppoe] link: CLOSE event
Feb 8 18:29:25 mpd: [pppoe] closing link "pppoe"…
Feb 8 18:29:25 mpd: [pppoe] bundle: CLOSE event in state OPENED
Feb 8 18:29:25 mpd: [pppoe] IPCP: LayerFinish
Feb 8 18:29:25 mpd: [pppoe] IPCP: state change Closing –> Closed
Feb 8 18:29:25 mpd: [pppoe] IPCP: rec'd Terminate Ack #4 link 0 (Closing)
Feb 8 18:29:25 mpd: [pppoe] exec: /sbin/ifconfig ng0 down delete -link0
Feb 8 18:29:25 mpd: [pppoe] exec: /sbin/route delete 87.78.45.153 -iface lo0
Feb 8 18:29:24 mpd: [pppoe] exec: /sbin/route delete 0.0.0.0 195.14.247.95
Feb 8 18:29:24 mpd: [pppoe] IFACE: Down event
Feb 8 18:29:24 mpd: [pppoe] IPCP: LayerDown
Feb 8 18:29:24 mpd: [pppoe] IPCP: SendTerminateReq #4
Feb 8 18:29:24 mpd: [pppoe] IPCP: state change Opened –> Closing
Feb 8 18:29:24 mpd: [pppoe] IPCP: Close event
Feb 8 18:29:24 mpd: [pppoe] rec'd signal usr2, closing -
When you disconnect and reconnect, how are you doing this? Letting the connection idle out? Using the connect / disconnect button in the interfaces status screen?
-
In the log i have the line with the button diconnectet and reconnect.
-
So this is being done from the interfaces status screen?
-
yes
my line is 24h connect no idle out
sorry my english is not good
-
This is strange because ppp-linkup basically sets a file that check_reload_status gets invoked to cover.
Can you send me the entire log file to sullrich@gmail.com
Also, did you reflash this version as opposed to updating?
-
This problem also exists if you let it idle out.
After 24h the connection is terminated and then reconnected by pfSense.
DynDNS does not update correctly after reconnecting… :-( -
Now I use the dyndns update service client on my server and it works without problems…
Strange behaviour of the ddns client in pfSense.
Scott sais, they do a periodic update once a day... but perhaps it is not enough ?
-
Good news: Scott found the error and will fix it in the next snapshot AFTER 2-8-06