Routing help need

xawiers

Hello to all.
I'm trying to setup routing from one lan to third through the second, but have diffiulties.
Tried to search posts - nothing found similar.

Network is:

(10.11.1.1) | pfsense B | <–- IPsec ---> | pfsense A | (10.11.0.21) --- (10.11.0.3)| cisco | 10.0.0.0/8
10.11.1.0/24 10.11.0.0/24

I neet to access 10.0.0.0/8 from pfsenseB network through pfsenseA network (route traffic to cisco device)
I made ipsec connection between both pfsense boxes (local to remote subnets):
on B: LAN <-> 10.11.0.0/24
on A: LAN <-> 10.11.1.0/24

added routes:
on A: 10.0.0.0/8 10.11.0.3

from A network I can access VPN network 10.0.0.0/8 through cisco

from B network I can't access
tried to add routes
10.0.0.0/8 10.11.0.21
10.0.0.0/8 10.11.0.3
didn't helped.

maybe you know some tricks ?

jeroen234

youre network mask on youre routes is to big
10.0.0.0/8 is 10.0.0.1 till 10.254.254.254

so pfsense server 1 and 2 are olso cot in the route to 10.0.0.0/8

the cisco network is thus including the a and b networks
chace a and b network to get them out of the cisco network range

a 192.168.1.0/24 192.168.1.1
b 192.168.2.0/24 192.168.2.1

route on a:
10.0.0.0/8 10.11.0.3
192.168.2.0/24 192.168.2.1

on b:
192.168.1.0/24 192.168.1.1
10.0.0.0/8 192.168.1.1

on cisco:
192.168.1.0/24 192.168.1.1
192.168.2.0/24 192.168.1.1

xawiers

BTW,
route 10.0.0.0/8 is because network 10.x.x.x is on other side of cisco VPN

jeroen234

the problem with youre setup is that for server a there is no route to server b all 10.x.x.x trafic is send to the cisco network
including that for server b
you can try this but not sure if it will work because off the dubbel network (10.11.1.0/24 is on 10.0.0.0/8)
add on cisco
10.11.0.0/24 10.11.0.21
10.11.1.0/24 10.11.0.21

on a
10.11.1.0/24 10.11.1.1
10.0.0.0/8 10.11.0.3

on b
10.0.0.0/8 10.11.0.21

xawiers

did like You wrote,

ping from LAN A to 10.x network is ok
ping from LAN B to 10.x network destination host unreachable.

i'll ask cisco gui to check routes also