Pppoe server units
-
will checkout the changes you have made and try again.
my understanding of part of the issue was here.- if (($_POST['pppoe_subnet'] && !is_ipaddr($_POST['remoteip']))) {
$input_errors[] = "A valid remote start address must be specified.";
and here
Subnet netmask
- <select id="n_pppoe_units" name="n_pppoe_units">+ </select>
for($x=0; $x<33; $x++) { - if($x == $pconfig['n_pppoe_units'])
- if($x == $pconfig['pppoe_units'])
$SELECTED = " SELECTED";
else
$SELECTED = "";
when you ask in the web gui for subnet mask you put this value into pppoe units. i did not see this changed. so my diff fixes this add adds pppoe units in. I saw that n_pppoe_units seems to be auto calculated in your recent commit but i dont think you dealt with this part of the problem.
- if (($_POST['pppoe_subnet'] && !is_ipaddr($_POST['remoteip']))) {
-
the vpn_consilidation seems to stop the replication of the configuration.
I just noticed a small error in my previous post but i think you will understand me.
If you like i will rediff it with just the subnetmask fix that seems to be required. -
Yes you are correct. This appears to be anothe rproblem. I'll check into this but would appreciate you checking the rest of my changes out.
-
the vpn_consilidation seems to stop the replication of the configuration.
I just noticed a small error in my previous post but i think you will understand me.
If you like i will rediff it with just the subnetmask fix that seems to be required.Go for it.
-
pppoe replication of config file only seems to occur at boot time now.
each time pfsense is rebooted it adds the config to the bottom of the exsisting file.maybe the contents of /var/etc/mpd-vpn should be removed on each reboot.
-
just noticed the aliases for ptpp and pppoe in pf
seem to be allocated like so ptpp ng0 to 16
pppoe ng 17 to 31. this seems to be based on the default values
that are hardcoded for these. so even if ptpp if off
it will stilll have ng0 to ng16 allocated to it.other changes seem fine.
the pppoe_subnet issue seems to be a little more difficult.
I know you dont like my patch but it works right. In respect
to the subnet and the n_pppoe_units setting is that it should
be possible to have a subnet of /24 but have a unit setting
of anything up to 254. The example would be multiple NAS devices
and one IPpool. You might set each Nas with the same /24 and
allocate Ip's from one radius pool. also you might have a subnet
of /24 with internal allocations but only activate 25 units.
but in three months add 30 more units cos you have more clients.just thoughts i know how you feel about this staying hardcoded.
but it looks easier if it was not. -
just noticed the aliases for ptpp and pppoe in pf
seem to be allocated like so ptpp ng0 to 16
pppoe ng 17 to 31. this seems to be based on the default values
that are hardcoded for these. so even if ptpp if off
it will stilll have ng0 to ng16 allocated to it.Okay, this should be fixed now.
other changes seem fine.
the pppoe_subnet issue seems to be a little more difficult.
I know you dont like my patch but it works right. In respect
to the subnet and the n_pppoe_units setting is that it should
be possible to have a subnet of /24 but have a unit setting
of anything up to 254. The example would be multiple NAS devices
and one IPpool. You might set each Nas with the same /24 and
allocate Ip's from one radius pool. also you might have a subnet
of /24 with internal allocations but only activate 25 units.
but in three months add 30 more units cos you have more clients.just thoughts i know how you feel about this staying hardcoded.
but it looks easier if it was not.I was waiting on an updated patchset :)
-
sorry scott just an update i have one patch done but not 100% happy have been busy working on a large project and tinkering with quagga on pfsense which has been going well. will have a better one for you by the end of the weekend
-
Okay, no problem-o.
-
PPPoE is fully working now.
Please cvs_sync.sh releneng_1 and test!
Tested so far:
-
Port forwards
-
Firewall rules
-
Radius
-