Ping quality
-
pf sense version: BETA4 PC
Pentium 3 500 Mhz 320 Mb RAMifconfig
$ ifconfig
xl0: flags=8843 <up,broadcast,running,simplex,multicast>mtu 1500
options=9 <rxcsum,vlan_mtu>inet6 fe80::201:2ff:fec6:e8cd%xl0 prefixlen 64 scopeid 0x1
inet 192.168.0.1 netmask 0xffffff00 broadcast 192.168.0.255
ether 00:01:02:c6:e8:cd
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
xl1: flags=8843 <up,broadcast,running,simplex,multicast>mtu 1500
options=9 <rxcsum,vlan_mtu>inet6 fe80::250:4ff:fea9:2973%xl1 prefixlen 64 scopeid 0x2
ether 00:50:04:a9:29:73
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
lo0: flags=8049 <up,loopback,running,multicast>mtu 16384
inet 127.0.0.1 netmask 0xff000000
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3
pflog0: flags=100 <promisc>mtu 33208
pfsync0: flags=41 <up,running>mtu 2020
pfsync: syncdev: lo0 maxupd: 128
ng0: flags=88d1 <up,pointopoint,running,noarp,simplex,multicast>mtu 1492
inet6 fe80::201:2ff:fec6:e8cd%ng0 prefixlen 64 scopeid 0x6
inet 168.226.64.134 –> 200.51.241.237 netmask 0xffffffffThe ms without motive are increasingly high, which is the problem? please help me
</up,pointopoint,running,noarp,simplex,multicast></up,running></promisc></up,loopback,running,multicast></full-duplex></rxcsum,vlan_mtu></up,broadcast,running,simplex,multicast></full-duplex></rxcsum,vlan_mtu></up,broadcast,running,simplex,multicast>
-
Call your ISP.
-
?????? ???
-
Call (pick up the phone, you know the thing you communicate verbally with people with), dial your internet service providers number and ask them why these problems are occuring. They most likely have nothing to do with pfSense.
-
I sometimes get these kind of issues too when my modem gets out of sync. Modemreset and resyncing the line by doing this fixes it then. Besides that if there is no load on the line and this even happens with the traffic shaper disabled check all your wires and if that doesn't help do what geekgod told you.
-
thanks scot, tahnks hoba.