Updated packages, incoming breakage, feedback needed

billm

@submicron:

Under the Metallic theme (and the Metallic theme only) both the ClamAV and HAVP package configuration options appear to the right of the PfSense frame. The settings appear properly, but the whole box is shifted to the right leaving a big empty white box where the configurations should appear.

Heh I've seen that before. Had to do with developing in HEAD and then backporting to RELENG_1. $pgtitle changes I believe. Hopefully that tidbit helps fix this problem :)

–Bill

raj2569

Updated ClamAV with Transparency support. To get Transparency in RELENG_1 branch (ie released versions) add the following in your /etc/inc/filter.inc

#Add package specific nat rule inside this anchor
$natrules .= "rdr-anchor "rdr-package/*" \n";

After this


if (is_package_installed('clamav') && file_exists('/usr/local/pkg/clamav.inc')) {
                require_once('clamav.inc');
                $natrules .= clamav_generate_rules('nat');
        }

Please execute cvs_sync.sh releng_1 from command shell, before attempting the patch. Reboot after the patch and then install the new HAVP package.

Please report any feedback about this package in this thread.

raj

Sifter

I am trying to get rid of squid so I can reinstall it. I tried through the gui first, it just hangs. So I did it through the pkg_delete command line tool. pkg_info reveals no such package now. But when I go to install packages, it still shows as installed, thus not allowing me to install/reinstall.

hoba

@Sifter:

I am trying to get rid of squid so I can reinstall it. I tried through the gui first, it just hangs. So I did it through the pkg_delete command line tool. pkg_info reveals no such package now. But when I go to install packages, it still shows as installed, thus not allowing me to install/reinstall.

Download the config.xml from diagnostics>backup/restore and check "do not backup package information" and restore the config again. Should solve the problem.

Sifter

ok I did that, the package installed. I went to services to try to start it, and got the following error: "(squid): Failed to verify one of the swap directories, Check cache.log for details. Run 'squid -z' to create swap directories if needed, or if running Squid for the first time".

So I ran squid -z and no longer see that error message, but whenever I hit start through the gui, it just goes back to stopped.

jola

the same about squid at here, i did sync to RELENG_1.
i go to console and do:

netstat -na | grep :3128 (for checking squid is running or not) but not found.
check tmp/rules.debug , but not rule for squid in mode transparent.
Thanks.

raj2569

More Updates to HAVP Package,

Package now uses latest verison of HAVP
You can exclude certain IPs from transparent proxy
Added 3 more havp options to web interface.
Transparency status is now persistent across reboot.

Give it a whirl, if it works well, this will become beta and then release version.

raj

jola

Thanks raj,
Do you add options for using HAVP Package with squid cache? It will great.
Thanks you.

Doufer

i'm unable to either deinstall or reinstall squid

squid.xml

Warning: delete_package(squid.inc): failed to open stream: No such file or directory in /etc/inc/pkg-utils.inc on line 652 Fatal error: delete_package(): Failed opening required 'squid.inc' (include_path='.:/etc/inc:/usr/local/www:/usr/local/captiveportal:/usr/local/pkg') in /etc/inc/pkg-utils.inc on line 652

Doufer

@Sifter:

I am trying to get rid of squid so I can reinstall it. I tried through the gui first, it just hangs. So I did it through the pkg_delete command line tool. pkg_info reveals no such package now. But when I go to install packages, it still shows as installed, thus not allowing me to install/reinstall.

I exactly have this same problem! Glad to know I'm not the only one.

raj2569

@jola:

Do you add options for using HAVP Package with squid cache? It will great.

Yes, There is an option to specify parent proxy in thenew version.

raj

trendchiller

Raj

is there any thing i have to look at when using havp ?
does the package autocreate the "transparent-rule" ?
cause it would not work when i tried last time … :'(

mrreload

I am unable to install havp her is what the log states for the package:

Beginning package installation.
Downloading package configuration file…
havp-0.80_5 Array
(
[0] => Requested space: 1172 bytes, free space: 16762202112 bytes in /var/tm
p/instmp.4mBLsp
[1] => tar: Unrecognized archive format: Inappropriate file type or format
[2] => pkg_add: tar extract of /tmp/apkg_havp-0.80_5.tbz failed!
[3] => pkg_add: unable to extract table of contents file from '/tmp/apkg_hav
p-0.80_5.tbz' - not a package?
[4] => pkg_add: 1 package addition(s) failed
)

Package WAS NOT installed properly.

Please help!

raj2569

Hi,

I was busy with some other stuff and forgot about this forum :)

is there any thing i have to look at when using havp ?

Yes, You have to add an anchor for HAVP.

mrreload: Can you try once more? For some reason the downloaded package is not a package.

raj

trendchiller

how to do that ? and where ?
can you post it here ?

raj2569

This is the adding havp anchor part, I had posted this couple of posts back.

@raj2569:

Updated ClamAV with Transparency support. To get Transparency in RELENG_1 branch (ie released versions) add the following in your /etc/inc/filter.inc

#Add package specific nat rule inside this anchor
$natrules .= "rdr-anchor "rdr-package/*" \n";

After this
if (is_package_installed('clamav') && file_exists('/usr/local/pkg/clamav.inc')) {
                require_once('clamav.inc');
                $natrules .= clamav_generate_rules('nat');
        }
Please execute cvs_sync.sh releng_1 from command shell, before attempting the patch. Reboot after the patch and then install the new HAVP package.

Please report any feedback about this package in this thread.

raj

raj

mrreload

Ok,
I tried again and I am getting the same thing. Log shows exactly the same as earlier post. I have tried deleteing the havp package file from /tmp, same. Tried to install it with or without squid installed. Tried a fresh install of pfsense, same. Strange thing is I have other packages installed without any issue. Squid and Freeradius.

raj2569

Hi,

Pl give me some time to go through this. I had reinstalled my pfSense test box for testing some other stuff, will finish that and come back.

raj

mrreload

Anything yet?

razor2000

@mrreload:

Ok,
I tried again and I am getting the same thing. Log shows exactly the same as earlier post. I have tried deleteing the havp package file from /tmp, same. Tried to install it with or without squid installed. Tried a fresh install of pfsense, same. Strange thing is I have other packages installed without any issue. Squid and Freeradius.

The same happens for me, even on a new install of pfsense. Here's the error i get for HAVP:

Downloading package configuration file… done.
Saving updated package information... done.
Downloading havp and its dependencies... done.
Checking for successful package installation... failed!

Installation aborted.

Here's the error I get when trying to install CLAMAV:

Installing clamav and its dependencies.
Executing custom_php_resync_config_command()...

It just sits there until I go and close the page after several minutes. Weird thing though is that CLAMSMTP installs fine without any problems.

Thanks in advance...