Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    UPnP support

    Scheduled Pinned Locked Moved Expired/Withdrawn Bounties
    363 Posts 28 Posters 401.0k Views
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • S
      Superman
      last edited by

      I'll try it out. Do you have a link or a file with some instructions?

      1 Reply Last reply Reply Quote 0
      • D
        databeestje
        last edited by

        replace /etc/inc/system.inc with http://iserv.nl/files/pfsense/system.inc
        replace /etc/inc/filter.inc with http://iserv.nl/files/pfsense/filter.inc
        replace /usr/local/www/interfaces_lan.php with http://iserv.nl/files/pfsense/interfaces_lan.txt
        replace /usr/local/www/interfaces_opt.php with http://iserv.nl/files/pfsense/interfaces_opt.txt
        execute this command, fetch -o /usr/local/sbin/miniupnpd http://iserv.nl/files/pfsense/miniupnpd
        execute this command, chmod +x /usr/local/sbin/miniupnpd

        enable it on the lan interface.

        Check the sytem logs.

        Currently unsupported

        1 Reply Last reply Reply Quote 0
        • S
          Superman
          last edited by

          Okay, files updated, service enabled. Stuff is happening in the system logs when I open uTorrent or MSN Messenger. I'll have to close some of my presently opened & NATed ports and check it out…

          Thanks!

          1 Reply Last reply Reply Quote 0
          • S
            Superman
            last edited by

            Further testing seems to indicate that it's working properly.
            I removed my NAT & Firewall Rules entries for uTorrent, enabled UPnP in the program, and it all worked!!
            The port was opened when I opened the program.
            And it seemed to be closed after I exited the program as indicated from a external port probe.

            It passes these simple tests anyway!

            Thanks again!

            1 Reply Last reply Reply Quote 0
            • S
              Superman
              last edited by

              Minor update.

              I did see this one error in the logs. It doesn't seem to stop it from working, but just for completeness here it is.

              miniupnpd[46767]: /dummy not found, responding ERROR 404
              
              1 Reply Last reply Reply Quote 0
              • D
                databeestje
                last edited by

                That's a feature. No fix for that. The computer is requesting something from the daemon which it does not comprehend.

                Nice hearing that it appears working.

                It does need further fixing though. It currently does not remove the firewall rules, only the port forwards to the inside host. I hope to fix that at a later time.

                Cheers.

                1 Reply Last reply Reply Quote 0
                • S
                  Superman
                  last edited by

                  Cool!!

                  It would be nice to have it as a package even in this state so we won't lose it across updates!
                  Plus it would be easier to install!  ;) Not that it's terribly difficult, but… :D

                  It may not be the best feature in a corporate environment, but it sure is nice in a small home/office setup!

                  Thanks for your hard work so far!! :D

                  JC (aka Superman)

                  1 Reply Last reply Reply Quote 0
                  • S
                    Skud
                    last edited by

                    Cool great!!

                    I'll have to give this a try and I'll let the OP (bradenmcg) know there has been progress as he is at the desk next to me.. :)

                    Riley

                    1 Reply Last reply Reply Quote 0
                    • D
                      databeestje
                      last edited by

                      It appears this wil be going into base instead of a package although that is still up for discussion

                      It does make sense for some corporate workplaces though. If you have a lot of skype and videoconferencing then upnp is a good solution and far more granular then opening port ranges or creating static port ranges with static IP's.

                      A socks proxy is even worse because then you can tunnel anything in and out.

                      Cheers,

                      1 Reply Last reply Reply Quote 0
                      • N
                        nsumner
                        last edited by

                        Can you see what has been opened by UPNP? IE can a corporate firewall administrator who in a fit of insanity allows uPnP at least see what is going on with it?

                        1 Reply Last reply Reply Quote 0
                        • D
                          databeestje
                          last edited by

                          Not yet.

                          1 Reply Last reply Reply Quote 0
                          • D
                            databeestje
                            last edited by

                            pfctl -aminiupnpd -sr
                            pfctl -aminiupnpd -sn

                            1 Reply Last reply Reply Quote 0
                            • J
                              Jonb
                              last edited by

                              I have tested it and I think I have gone wrong some ware because I get this

                              XML error: not well-formed (invalid token) at line 99

                              Hosted desktops and servers with support without complication.
                              www.blueskysystems.co.uk

                              1 Reply Last reply Reply Quote 0
                              • D
                                databeestje
                                last edited by

                                That's very interesting. I have not seen that happen on 3 different hosts I tried it on.

                                What does the config.xml look like at line 99?

                                It should (probably)  be in the interfaces, lan section
                                Which should have a <enableupnp>tag.</enableupnp>

                                1 Reply Last reply Reply Quote 0
                                • J
                                  Jonb
                                  last edited by

                                  well I have just tryed it on my other PFsense box and it works.  Hmm I must of broken something when I was playing around.

                                  Hosted desktops and servers with support without complication.
                                  www.blueskysystems.co.uk

                                  1 Reply Last reply Reply Quote 0
                                  • S
                                    Superman
                                    last edited by

                                    Okay, I just tested the latest version of miniupnpd…this time I decided to reboot to make sure to clear the tables...and I noticed a small bug, perhaps unique to me, but maybe not.

                                    Miniupnpd did not restart at reboot. I had to go to the LAN page > disable it > apply > enable it > apply again, and then it was running.

                                    Oh, and not much is being logged anymore.

                                    1 Reply Last reply Reply Quote 0
                                    • D
                                      databeestje
                                      last edited by

                                      It might not be included in the startup scripts. I think the code in HEAD does do this.

                                      I have not rebooted my box yet. So I have not noticed.

                                      1 Reply Last reply Reply Quote 0
                                      • N
                                        nsumner
                                        last edited by

                                        I am unable to get it working properly.

                                        First I tried utorrent and it seems to of half worked. I never turned green but the port was open doing a port scan…

                                        Then I tried the following program to test http://fp.mgillespie.plus.com/upnphelp.htmhttp://fp.mgillespie.plus.com/upnphelp.htm. There is a link there to download. The program fails tests 7 and 8. In my experience if you pass his test uPnP will work. If you fail his test, it will be hit and miss at best. It of course could just be my setup.

                                        I have my LAN set to 192.168.17.x (just incase there is a buglet there which I doubt), and am using PPPoE (which again I doubt has any effect).
                                        If you have any other program you want me to test with just tell me please.

                                        1 Reply Last reply Reply Quote 0
                                        • D
                                          databeestje
                                          last edited by

                                          to make it startup on reboot

                                          replace /etc/inc/pfsense-utils.inc with http://iserv.nl/files/pfsense/pfsense-utils.inc
                                          replace /etc/inc/system.inc with http://iserv.nl/files/pfsense/system.inc
                                          fetch -o /usr/local/sbin/miniupnpd http://iserv.nl/files/pfsense/miniupnpd
                                          chmod +x /usr/local/sbin/miniupnpd

                                          also updated the miniupnpd binary so it logs properly.

                                          About that test program, ignore it. What it does is connect from the LAN to the WAN on the opened port and then gets bitten by the fact that there is not NAT reflection for that port.

                                          I do not plan on adding that. Furthermore, Azureus does not have this problem (which is what I test with).

                                          1 Reply Last reply Reply Quote 0
                                          • S
                                            Superman
                                            last edited by

                                            Okay, I tried this all out. Logging is working properly, but the daemon still doesn't seem to restart after a reboot. I'll check over all the files to make sure they're right, but I did follow all the directions…

                                            1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post
                                            Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.