Installed PfSense, but the whole internet is slow! Help!
-
Couple of things that I am not sure if I mentioned.
I cant seem to access IRC. It starts to connect and then says "(no identd (auth) response)".
I changed the cable today that went from the WAN to the DSL modem, and then tried to download that file directly from the pfsense box, and got normal working speeds 200-300KBps.
I dont know if it was the cable or pure coincidence, but IRC seemed to start working again!
Went ahead and tried to browse at random sites, but still it wasnt really working, speeds are slower than 56k, and sometimes pages dont finish loading.
I also went ahead and deleted that 192.168.1.1 address from the DNS as was mentioned up top.
-
Do you have another modem to try?
-
Do you have another modem to try?
no I dont. :-[ :-[
but you think that might be the problem? It works fine when I connect it either straight to the modem or through the Linksys router. I think the modem is fine?
-
Sometimes devices negotiate with some nics just fine and have problems with other ones. Would be worth a try. What does status>interfaces show for your nics? collisions? errors, maybe a wrong duplex mode somewhere?
-
Sometimes devices negotiate with some nics just fine and have problems with other ones. Would be worth a try. What does status>interfaces show for your nics? collisions? errors, maybe a wrong duplex mode somewhere?
it did show some errors, like 30 over the span of an hour.
I have some 3com NICs I will try today, and I also want to try to re-format and re-install.
-
Well I really dont know what to do now.
I went ahead and took the Realtek cards out of the system completely. I installed some 3com ones that are supported according to the list. (cant remember their models exactly). Installed pfsense again and now it only detects one of them. yes both are connected since I have a link light on both of the 3com ones.
ARGH I think I am really going to give pfsense a rest and come back in a couple of months and see if its changed in any way.
Back to clark connect I go. :-[
-
You must have some rally strange hardware issues. Replacing the box most likely will fix it. Strange as I have a similiar 1U IBM Serversystem (e330) at home that runs just fine with pfSense. Maybe a Biosupdate would help?
-
You must have some rally strange hardware issues. Replacing the box most likely will fix it. Strange as I have a similiar 1U IBM Serversystem (e330) at home that runs just fine with pfSense. Maybe a Biosupdate would help?
actually I believe it IS a 330?
i dont know, finding a bios through the IBM site is a mess!
-
Here's everything for this server: http://www-307.ibm.com/pc/support/site.wss/product.do?template=/product.do?template=%2Fproductpage%2Flandingpages%2FproductPageLandingPage.vm&sitestyle=ibm&brandind=8&familyind=50276&machineind=0&modelind=0&partnumberind=0&subcategoryind=0&doctypeind=9&doccategoryind=0&operatingsystemind=49977&validate=true
My one has 1,2 GB, 1x1,4 GHz PIII-S (512kb cache, second cpu socket not used). 2x 18GB SCSI RAID1. Additional to the 2 fxp onboard nics I have a 4port switchcard that is realtek based in it. The only thing that I had to do to make the live-cd boot completely is to disable dma for the atapi cdrom and disable the fdd in bios or it would halt somewhere on bootup (see http://wiki.pfsense.com/wikka.php?wakka=BootOptions for how to disable the dma mode).
-
Here's everything for this server: http://www-307.ibm.com/pc/support/site.wss/product.do?template=/product.do?template=%2Fproductpage%2Flandingpages%2FproductPageLandingPage.vm&sitestyle=ibm&brandind=8&familyind=50276&machineind=0&modelind=0&partnumberind=0&subcategoryind=0&doctypeind=9&doccategoryind=0&operatingsystemind=49977&validate=true
My one has 1,2 GB, 1x1,4 GHz PIII-S (512kb cache, second cpu socket not used). 2x 18GB SCSI RAID1. Additional to the 2 fxp onboard nics I have a 4port switchcard that is realtek based in it. The only thing that I had to do to make the live-cd boot completely is to disable dma for the atapi cdrom and disable the fdd in bios or it would halt somewhere on bootup (see http://wiki.pfsense.com/wikka.php?wakka=BootOptions for how to disable the dma mode).
wow that is very helpful! I really appreciate your input and dedication to the community!
I will certaintly give that a try sometime this week.
Yes random it was also halting at the drive detection screen, but sometimes it went through? Also though one of my cards wasnt being detected though on the PCI bus. I had 2 onboard + 2 realteks and only one realtek got picked up.
I will do a bios update and try those settings and maybe report back this weekend.
Again thanks!