Wrap installation
-
yes
then when booted you need to upload these upgrades in order
http://pfsense.iserv.nl/updates/pfSense-1.0-rc3a-Full-Embedded.tgz
http://pfsense.iserv.nl/updates/pfSense-1.0-RC3b-Full-Embedded.tgz
http://pfsense.iserv.nl/updates/pfSense-1.0-RC3c-Full-Embedded.tgz
http://pfsense.iserv.nl/updates/pfSense-1.0-RC3d-Full-Embedded.tgz
http://pfsense.iserv.nl/updates/pfSense-1.0-RC3e-Full-Embedded.tgz -
Thank you very much :)
Upgrades a-b-c-d-e may be loaded from the web interface?
-
yes from the firmware page
will have a wrap and a soekris tomorow
will make a image for them that all ready has the upgrades in it
don't want to reboot 5 times per emebbed box -
will make a image for them that all ready has the upgrades in it
nice idea ;)
Thanks again!
-
if you don't want to reboot so manny times then you can try my image
http://members.lycos.nl/jeroen234/pfsense_enbedded/ -
is there an update shell script like those posted in this thread (http://forum.pfsense.org/index.php/board,30.0.html)
-
i just used this…
#!/bin/sh
cd /tmp
fetch http://pfsense.iserv.nl/updates/pfSense-1.0-rc3a-Full-Embedded.tgz
fetch http://pfsense.iserv.nl/updates/pfSense-1.0-RC3b-Full-Embedded.tgz
fetch http://pfsense.iserv.nl/updates/pfSense-1.0-RC3c-Full-Embedded.tgz
fetch http://pfsense.iserv.nl/updates/pfSense-1.0-RC3d-Full-Embedded.tgz
fetch http://pfsense.iserv.nl/updates/pfSense-1.0-RC3e-Full-Embedded.tgz
cd /
tar zxvf /tmp/pfSense-1.0-rc3a-Full-Embedded.tgz
tar zxvf /tmp/pfSense-1.0-RC3b-Full-Embedded.tgz
tar zxvf /tmp/pfSense-1.0-RC3c-Full-Embedded.tgz
tar zxvf /tmp/pfSense-1.0-RC3d-Full-Embedded.tgz
tar zxvf /tmp/pfSense-1.0-RC3e-Full-Embedded.tgzon a side note, when i tried to uploaded rc3a through the web browser it didn't seem to update the /usr/local/lib/php/extensions/no-debug-non-zts-20020429/apc.so file like it was suppose to.
-
Or you can add the patches before you flash the image file. Have to use them on a freebsd machine, I use freesbie in vmware, but you can just burn it to a CD and run directly from there (doesn't modify hard disk).
Script to add the patches.
http://wgnrs.dynalias.com:81/pfsense/sh-add-patch.shScript to replace the stock config with your config.
http://wgnrs.dynalias.com:81/pfsense/sh-replace-config.shAnd for those who want an all in one solution. A script that adds the patches, config, and miniupnpd. But you can download and modify to get what you want. It calls the above plus some other scripts.
http://wgnrs.dynalias.com:81/pfsense/sh-custom-image.sh -
i use a pfsense hd install to make the pfsense embedded images
-
i use a pfsense hd install to make the pfsense embedded images
Does this mean your images will write to the CF more often and thus wear the CF out faster?
-
nope i use pfsense to add the patches and extra files to the basic rc3 embedded image