Port Forwarding Issue

rsw686

On the firewall menu select NAT. Click the plus image to add a nule rule. Then fill in external port 82, nat ip 10.10.1.70, local port 80, and give it a description. Leave auto-add a firewall rule checked and click save.

sunny

Thanks for your reply! I tried it but doesn't seem to be working. Is there anything else that needs to be changed? Actually, its getting timed out.

sintar

try this not sure if it will work

pfsensenatrules.jpg_thumb

hoba

Don't use external adress "any". You need to bind it to the WAN-Adress. any is only for some special application (for example when redirectring traffic to any external adress on port x back to a proxy for example).

sunny

Hoba, do you mind walk me thru the process please?

hoba

Can you paste your setings for the firewallrule and the portforwarding that you created please?

mobilemrice

Hi Hoba,

I am also encountering issues with my NAT settings. Can you please look at the attached settings? Thank you.

![NAT settings.gif](/public/imported_attachments/1/NAT settings.gif)
![NAT settings.gif_thumb](/public/imported_attachments/1/NAT settings.gif_thumb)
![NAT settings.gif_thumb](/public/imported_attachments/1/NAT settings.gif_thumb)

hoba

The NAT entry looks ok from the first sight. If you have an appropriate firewallrule in place that is allowing this traffic it should work. Also make sure you are at 1.0.1.

mobilemrice

What type of rule would allow visitors from the WAN to the OPT1 net with the host using the NAT I set above?

hoba

Interface WAN
protocol tcp/udp
source any
destination <private ip="" of="" forwarded="" client="">port <destination port="" at="" the="" client="">gateway default</destination></private>

PinoVero

i have the same itentical problem, except for…

i set 2 firewall rules:

prot: * from: * port: * to: 192.168.0.40 port: * gate: * (windows machine)
prot: * from: * port: * to: 192.168.0.200 port: * gate: * (linux machine)

so i'll be sure that i can transfer any packets from and to any ports to these 2 machines

now, i need to open only 1 or 2 single port to forward to, so i make a nat rule like this:
if: wan prot: tcp port: 4889 nat: 192.168.0.40 (ext: 2.247.bla.bla) port: 4889 (correctly WORK!!)
if: wan prot: tcp port: 4889 nat: 192.168.0.200 (ext: 2.247.bla.bla) port: 4889 (DON'T WORK!!)

So, why nat don't like to linux port forward???

PinoVero

oky, the reason is that

on the linux machine i have not jet configured the proper gateway!