Squid Returned to Packages *** PLEASE TEST ***
-
If you go to the access control page and click save. Does that work for you?
-
That's what I get after that… Again, I am pretty new with this, so what version do I need to have installed...
Jan 10 01:25:35 squid: Bungled squid.conf line 60: http_access allow unrestricted_hosts
Jan 10 01:25:20 php: : SQUID is installed but not started. Not installing redirect rules.
Jan 10 01:25:20 php: : SQUID is installed but not started. Not installing redirect rules.
Jan 10 01:25:17 check_reload_status: reloading filter
Jan 10 01:25:16 squid: Bungled squid.conf line 60: http_access allow unrestricted_hosts
Jan 10 01:25:16 php: /pkg_edit.php: Starting Squid -
Hello,
after entering IPs in the fields unrestricted hosts, whitelist and blacklist squid is working again for me. Leaving the fields empty does not work.
BTW is there a way to use the blacklists from squid guard (http://squidguard.shalla.de/shallalist.html) where the domains are separated by <cr>and not by commas?</cr>
-
Since the squid.sh is used by the start, stop and restart service I will not remove that one.
What I have done instead is implement a delay in the proxy monitor script to wait 5 seconds after launhing to trigger a squid start or not.
This is reflected as version p7. I have also moved the proxy start script after our attempt to start it.
Thanks for the fix, I will test here in the next day or two!
-
Just started testing version p8. Thanks so much for your efforts on this databeestje - this is a huge feature for many of us :-)
First minor thing I noticed, my squid.conf line 17 now unexpectedly reads:
Allow local network(s) on interface(s)
I don't think that belongs there ;-) This same line appears later in squid.conf, but in that case it is properly commented out. No big deal - just wanted to let you know.
-
I have the same problem as some others - if I leave the Whitelist section empty, I get:
/usr/local/sbin/squid status
2007/01/11 04:01:44| parseConfigFile: line 17 unrecognized: 'Allow local network(s) on interface(s)'
2007/01/11 04:01:44| ACL name 'whitelist' not defined!
FATAL: Bungled squid.conf line 65: http_access allow whitelist
Squid Cache (Version 2.6.STABLE5): Terminated abnormally.if I leave the blacklist section empty, I get:
/usr/local/sbin/squid status
2007/01/11 04:00:00| parseConfigFile: line 17 unrecognized: 'Allow local network(s) on interface(s)'
2007/01/11 04:00:00| ACL name 'blacklist' not defined!
FATAL: Bungled squid.conf line 67: http_access deny blacklist
Squid Cache (Version 2.6.STABLE5): Terminated abnormally.i.e. in either case squid actually stops running, which is a silent failure as far as the webgui is concerned
-
oops!
-
I also had it not working unless I filled out the fields. I found that after adding ip's in the last two (whitelist / blacklist) I could then remove them and leave just a single space and squid would not complain about the squid.conf file. No time to look at it further right now.
-
I have a small update again, it's not that it's a bug, but it's not complete correct
the code:foreach (explode(',', $ifaces) as $i => $iface) { $real_ifaces[] = squid_get_real_interface_address($iface); if($real_ifaces[$i][0]) { if (($settings['transparent_proxy'] == 'on')) { $conf .= "http_port 127.0.0.1:80 transparent\n"; } $conf .= "http_port {$real_ifaces[$i][0]}:$port\n"; } }should be
if (($settings['transparent_proxy'] == 'on')) { $conf .= "http_port 127.0.0.1:80 transparent\n"; } else { foreach (explode(',', $ifaces) as $i => $iface) { $real_ifaces[] = squid_get_real_interface_address($iface); if($real_ifaces[$i][0]) { $conf .= "http_port {$real_ifaces[$i][0]}:$port\n"; } } }If you have multiple lan interfaces where you want to run squid on in transparency mode, the old code will add```
http_port 127.0.0.1:80 transparentEvery interface you've selected will be pointed to the localhost later in the script. -
Just updated to p9 which should generate the incorrect config creation.
Empty blacklist fixing is saved for another day.
-
This is looking great. Thanks so much for all the progress.
I've found one small issue, though it could relate to the malformed blacklist acl. Wildcards do not work. When the original squid plugin was working back when, I could create a white list and enter * as the blacklist. This would only allow traffic to the explicitly named sites.
-
data has been working his ass off on this squid thing where nobody else would work on it including me.
Please show your support and donate to the data fund. Not sure of his paypal account but please, he really has been working hard and deserves a couple cases of beer or wine, etc.
-
Donate money to Seth for no good reason to seth.mos@xs4all.nl
-
Does squid affects the load balancing rules? I'm using load balancing for my two WAN's and it is working fine.
Whenever squid is installed, all http traffic goes to the WAN gateway, no traffic passes through WAN2. But if i remove squid, load balancing functions properly again.
Any recommendations? Thank you very much.
Pfsense rocks!!! -
That would be correct. That is not something we can fix.
It's the same issue as the FTP proxy -
pfsense and all aplications on pfsense it self can not use load balancing so they will use the wan interface
-
Is Squid supposed to be working ATM?
Installed it on a 1.0.1 with 1.0.1-SNAPSHOT-01-13-2007 built on Sun Jan 14 15:07:53 EST 2007 and got these errors:
Jan 15 10:02:48 php: : SQUID is installed but not started. Not installing redirect rules. Jan 15 10:02:47 check_reload_status: reloading filter Jan 15 10:02:47 squid: Bungled squid.conf line 58: http_access allow unrestricted_hosts Jan 15 10:02:47 php: /pkg_mgr_install.php: Starting Squid Jan 15 10:02:47 last message repeated 2 times Jan 15 10:02:41 squid: Bungled squid.conf line 58: http_access allow unrestricted_hosts Jan 15 10:02:41 php: /pkg_mgr_install.php: Creating squid cache subdirs in /var/squid/cache Jan 15 10:02:41 squid: Bungled squid.conf line 58: http_access allow unrestricted_hosts Jan 15 10:02:41 php: /pkg_mgr_install.php: Starting Squid Jan 15 10:02:41 last message repeated 2 times Jan 15 10:02:41 squid: Bungled squid.conf line 58: http_access allow unrestricted_hosts Jan 15 10:02:41 Squid_Alarm[70206]: Attempting restart... Jan 15 10:02:41 Squid_Alarm[70204]: Squid has exited. Reconfiguring filter. Jan 15 10:02:40 check_reload_status: reloading filter Jan 15 10:02:36 squid: Bungled squid.conf line 58: http_access allow unrestricted_hosts Jan 15 10:02:36 php: /pkg_mgr_install.php: Creating squid cache subdirs in /var/squid/cache Jan 15 10:02:36 php: /pkg_mgr_install.php: Creating squid log dir /var/squid/log/ Jan 15 10:02:36 kernel: pid 70103 (squid), uid 0: exited on signal 6 (core dumped) Jan 15 10:02:36 squid: Unable to open configuration file: /usr/local/etc/squid/squid.conf: (2) No such file or directory Jan 15 10:02:36 php: /pkg_mgr_install.php: Starting a proxy monitor script Jan 15 10:02:36 php: /pkg_mgr_install.php: Starting Squid Jan 15 10:02:36 kernel: pid 70097 (squid), uid 0: exited on signal 6 (core dumped) Jan 15 10:02:36 squid: Unable to open configuration file: /usr/local/etc/squid/squid.conf: (2) No such file or directory Jan 15 10:02:36 kernel: pid 70095 (squid), uid 0: exited on signal 6 (core dumped) Jan 15 10:02:36 squid: Unable to open configuration file: /usr/local/etc/squid/squid.conf: (2) No such file or directory Jan 15 10:02:31 kernel: pid 70092 (squid), uid 0: exited on signal 6 (core dumped) Jan 15 10:02:31 squid: Unable to open configuration file: /usr/local/etc/squid/squid.conf: (2) No such file or directory Jan 15 10:02:31 php: /pkg_mgr_install.php: Creating squid cache subdirs in /var/squid/cache Jan 15 10:02:30 php: /pkg_mgr_install.php: Stopping any running proxy monitors Jan 15 10:02:29 kernel: pid 70078 (squid), uid 0: exited on signal 6 (core dumped) Jan 15 10:02:29 squid: Unable to open configuration file: /usr/local/etc/squid/squid.conf: (2) No such file or directory Jan 15 10:02:29 kernel: pid 70076 (squid), uid 0: exited on signal 6 (core dumped) Jan 15 10:02:29 squid: Unable to open configuration file: /usr/local/etc/squid/squid.conf: (2) No such file or directory Jan 15 10:02:24 kernel: pid 70073 (squid), uid 0: exited on signal 6 (core dumped) Jan 15 10:02:24 squid: Unable to open configuration file: /usr/local/etc/squid/squid.conf: (2) No such file or directory Jan 15 10:02:24 php: /pkg_mgr_install.php: Creating squid cache subdirs in /var/squid/cache Jan 15 10:02:24 php: /pkg_mgr_install.php: Creating Squid cache dir /var/squid/cache Jan 15 10:02:02 php: /pkg_mgr_install.php: Beginning package installation for squid.Actually, the file /usr/local/etc/squid/squid.conf is located where it's supposed to…
-
As the previous posts mention, fill in those fields on the access control tab and the errors go away.
I have not had time or incentive to fix these errors yet.
-
Thanks again for all the squid work. Hope nobody minds if databeestje gets the $125 remaining on my bounty. I'm really looking forward to the last few kinks getting worked out soon.
Maybe some of the other Squid users out there could pitch in a bit too, data deserves it!
-
Data deserves every penny plus some more…
