CP Status does not show usernames

alexus

ok where do i find it

who edited CP page? it doesnt look like original Jonthan's code…
I see it uses regular DB file + bandwith control is now what mono has its something diferent

sullrich

ok where do i find it

who edited CP page? it doesnt look like original Jonthan's code…
I see it uses regular DB file + bandwith control is now what mono has its something diferent

CVSWEB has everything you just asked for.

http://pfsense.com/cgi-bin/cvsweb.cgi/

Linked from pfsense.com

alexus

well ok any way
I just run the CP in debug mode for accounting and it does confirm that accounting pakets are being send twise haveing identical data… the problem is that i looked at th e cript many times alredy and cant find duplicte calls ... maybe the author of modification can take a look? since afterall i dont know full alghorithm and im alredy fustrated

sullrich

@alexus:

well ok any way
I just run the CP in debug mode for accounting and it does confirm that accounting pakets are being send twise haveing identical data… the problem is that i looked at th e cript many times alredy and cant find duplicte calls ... maybe the author of modification can take a look? since afterall i dont know full alghorithm and im alredy fustrated

I've already looked at it and have no idea why its happening. If I knew, I would have fixed it.

alexus

lol

alexus

ok im gonna do dirty debuging on my release image, but then some one will have to give me original 1.0.1 CP files,, because i know .. after my debuging even if i find the proble the files will be coruped by hundreds of comments and debug switches

sullrich

@alexus:

ok im gonna do dirty debuging on my release image, but then some one will have to give me original 1.0.1 CP files,, because i know .. after my debuging even if i find the proble the files will be coruped by hundreds of comments and debug switches

Back up the files prior with tar.

alexus

its kinda too late alredy, I forgot on what parts i alredy enabled the debug mode :-(

sullrich

Well download the most recent snapshot and save it. It is 1.0.1 up until today.

alexus

like i have any idea where the snupshots are?

http://pfsense.com/cgi-bin/cvsweb.cgi/pfSense/usr/local/captiveportal/index.php?rev=1.37

is that a curent file?

sullrich

@alexus:

like i have any idea where the snupshots are?

http://pfsense.com/cgi-bin/cvsweb.cgi/pfSense/usr/local/captiveportal/index.php?rev=1.37

is that a curent file?

http://snapshots.pfsense.com/FreeBSD6/RELENG_1/

alexus

but those are disk images….
im doing development straight from WRAP so got not much ability for mounting and remounting... i just will need the clean file to put back in when I find the bug ( actually if i find it :-(

sullrich

You comment so quickly before checking something out.

These are upgrade files which are simply a tar backup!

alexus

yes i talk non stop :-P
thats why I have 1 PC jut for forums and AIM etc :-P

well the .img. confused me then

sullrich

Slow down, buddy. You also need to enable a spell checker.

http://snapshots.pfsense.com/FreeBSD6/RELENG_1/updates/pfSense-Full-Update-1.0.1-SNAPSHOT-12-28-2006.tgz

alexus

ok thanks for the file link ;-)

spell cheker slows me down yes, but i dont like it

sullrich

@alexus:

ok thanks for the file link ;-)

spell cheker slows me down yes, but i dont like it

Half the time your unintelligible due to the amount of spelling typos.

One minute more of your time will save a minute off everyone that reads this thread!

alexus

ok i will write in Russian :-P
Now I’m having trouble with the drain in my house so have to stop at this point,
but so far i found that CP is not debugable :-( so maybe some one has any ideas how to debug it?

and also while reviewing the CP files i found tha accounting itself could be more specific.

Anyway as of now the only thing i know is that accounting script is called twice, this could be doe either by direct call (highly unlikely) or via user access authorization function that brings up the accounting. The user access authorization function is called 3 times 1) for MAC pass through and 2 other times a would assume a) for new access b) returning user

That’s it,,,, i dono what to do next

alexus

Ok, i got bored not knowing what users are loged in on CP (Not talking about Radius Acc)
So I did the fix so that we still can see the loged in username!!!

See code below.

Also there is a probem with not writing traffic usege by users to the db file. That should be fixed somewhere but I dono where yet, and there is another problem with redundant radius accounting packets.


/* $Id: status_captiveportal.php,v 1.7.2.4 2006/04/03 21:05:12 sullrich Exp $ */
/*
	status_captiveportal.php
	part of m0n0wall (http://m0n0.ch/wall)

	Copyright (C) 2003-2004 Manuel Kasper <mk@neon1.net>.
	All rights reserved.

	Redistribution and use in source and binary forms, with or without
	modification, are permitted provided that the following conditions are met:

	1\. Redistributions of source code must retain the above copyright notice,
	   this list of conditions and the following disclaimer.

	2\. Redistributions in binary form must reproduce the above copyright
	   notice, this list of conditions and the following disclaimer in the
	   documentation and/or other materials provided with the distribution.

	THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,
	INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
	AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
	AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,
	OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
	SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
	INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
	CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
	ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
	POSSIBILITY OF SUCH DAMAGE.
*/

require("guiconfig.inc");

$concurrent = `cat /var/db/captiveportal.db | wc -l`;

$pgtitle = "Status: Captive portal ({$concurrent})";

include("head.inc");

?>

if ($_GET['act'] == "del") {
	captiveportal_disconnect_client($_GET['id']);
}

flush();

function clientcmp($a, $b) {
	global $order;
	return strcmp($a[$order], $b[$order]);
}

$cpdb = array();
captiveportal_lock();
$fp = @fopen("{$g['vardb_path']}/captiveportal.db","r");

if ($fp) {
	while (!feof($fp)) {
		$line = trim(fgets($fp));
		if ($line) {
			$cpent = explode(",", $line);
			//Alexus: lets cout last element of new array cpnetp[] and use it for last activity
			if ($_GET['showact'])
                                      //Alexus: Created additional array entry as a buffer to free 4
			$cpent[11]=captiveportal_get_last_activity($cpent[1]);
			$cpdb[] = $cpent;
                                      }
		}
	}

	fclose($fp);

	if ($_GET['order']) {
		if ($_GET['order'] == "ip")
			$order = 2;
		else if ($_GET['order'] == "mac")
			$order = 3;
		else if ($_GET['order'] == "lastact")
			$order = 4;
		else
			$order = 0;
		usort($cpdb, "clientcmp");
	}
}
captiveportal_unlock();
?>

| Username | [IP address](?order=ip&showact=<?=$_GET['showact'];?>) | [MAC address](?order=mac&showact=<?=$_GET['showact'];?>) |	 [Session start](?order=start&showact=<?=$_GET['showact'];?>) | [Last activity](?order=lastact&showact=<?=$_GET['showact'];?>) |	 [Session start](?order=start&showact=<?=$_GET['showact'];?>) |	  |
|  |  |   |  |	  |		 
	[![](./themes/<?= $g['theme']; ?>/images/icons/icon_x.gif)](?order=<?=$_GET['order'];?>&showact=<?=$_GET['showact'];?>&act=del&id=<?=$cpent[1];?>) |</mk@neon1.net>

PS: I think something wrong w/ closing if (copy and paste error) … the forum not allowing me to attach php file

sullrich

Please provide a unified diff.

http://wiki.pfsense.com/wikka.php?wakka=SubmittingPatches