Bounty $200: Monitor bandwidth use on IP adresses. NOW $250

Mercredi

we are still in the interest for the package :) i would also donate another amount of dollars at the end of the project :)

sullrich

Looks like I'll be starting on this sometime this week.

backbone

@sullrich:

Looks like I'll be starting on this sometime this week.

Started? :D

sullrich

Not yet. I am still finishing my failover project at work and this will be started right after that.

Hank

Will this solution give us the following two reports:

1. Total traffic by service port number (and also sub divided into IPs if possible)
2. Total traffic by IP address AND NetBIOS name

If yes I will double the current bounty immediately ;-)

Hank

sullrich

@Hank:

Will this solution give us the following two reports:

1. Total traffic by service port number (and also sub divided into IPs if possible)
2. Total traffic by IP address AND NetBIOS name

If yes I will double the current bounty immediately ;-)

Hank

Here's the website of the package that I will be creating..

http://bandwidthd.sourceforge.net/

backbone

So the bounty is up in $500 then?? ;D

What time will u start working sullrich??

u are planing to use the dynamic version?
where will the database run?

sullrich

@backbone:

So the bounty is up in $500 then?? ;D

What time will u start working sullrich??

u are planing to use the dynamic version?
where will the database run?

Huh!?! I've only received 75$ to date.

So if it its 500$ where is all the $$??

Mercredi

75? ouch. i've sent my 50 dollars, and somebody another 25 dollars? who really need this package? send money, please.

sullrich

Well I think ppl only sent half up front.

But either way, 500$.. Where does that figure come from?

Mercredi

it came from the subject of this bounty, $250 for the package.

Perry

Hi There

I hope some of the 100$ i've send could help this bounty.

me /slaps Backbone for not sending any of the norwegian oil money, as he started this bounty :p

It was Hank who would add the last 250$.

@Hank:

Will this solution give us the following two reports:

1. Total traffic by service port number (and also sub divided into IPs if possible)
2. Total traffic by IP address AND NetBIOS name

If yes I will double the current bounty immediately ;-)

Hank

Hank

Yes, it was me, but if I expressed myself clearly it was related to the two 'features' I explicitly mentioned and that the statistics is saved to disk (recoverable after power failures etc..)

Any comments on this, Scott..?

Hank

sullrich

@Hank:

Yes, it was me, but if I expressed myself clearly it was related to the two 'features' I explicitly mentioned and that the statistics is saved to disk (recoverable after power failures etc..)

Any comments on this, Scott..?

Hank

I dont plan on changing bandwidthd, just getting it working on pfSense. So if it will be saved across a reboot, etc, I don't know and would be a feature of the application itself.

sullrich

FYI:
I have started on the bandwidthd package. http://cvstrac.pfsense.com/chngview?cn=16403

sullrich

Alrighty, test it out. It should be in the packages area now.

yoda715

Link under services after installing package is broken.

Mercredi

yes, it is broken enough :)

sullrich

@sdale:

Link under services after installing package is broken.

Until you start it via status services, yes. BandwidthD must create the contents!

Bredys

I try install this package on new instaled pfsense with last snapshot from 02.02.
But i cannot start service :

Feb 4 16:31:36 bandwidthd: Syntax Error "syntax error" on line 11
Feb 4 16:31:36 bandwidthd: Syntax Error "syntax error" on line 11
Feb 4 16:31:36 bandwidthd: Monitoring subnet 192.168.10.0 with netmask 192.168.10.0
Feb 4 16:31:16 bandwidthd: Syntax Error "syntax error" on line 11
Feb 4 16:31:16 bandwidthd: Syntax Error "syntax error" on line 11