Bounty $200: Monitor bandwidth use on IP adresses. NOW $250
-
So the bounty is up in $500 then?? ;D
What time will u start working sullrich??
u are planing to use the dynamic version?
where will the database run?Huh!?! I've only received 75$ to date.
So if it its 500$ where is all the $$??
-
75? ouch. i've sent my 50 dollars, and somebody another 25 dollars? who really need this package? send money, please.
-
Well I think ppl only sent half up front.
But either way, 500$.. Where does that figure come from?
-
it came from the subject of this bounty, $250 for the package.
-
Hi There
I hope some of the 100$ i've send could help this bounty.
me /slaps Backbone for not sending any of the norwegian oil money, as he started this bounty :p
It was Hank who would add the last 250$.
Will this solution give us the following two reports:
1. Total traffic by service port number (and also sub divided into IPs if possible)
2. Total traffic by IP address AND NetBIOS nameIf yes I will double the current bounty immediately ;-)
Hank
-
Yes, it was me, but if I expressed myself clearly it was related to the two 'features' I explicitly mentioned and that the statistics is saved to disk (recoverable after power failures etc..)
Any comments on this, Scott..?
Hank
-
Yes, it was me, but if I expressed myself clearly it was related to the two 'features' I explicitly mentioned and that the statistics is saved to disk (recoverable after power failures etc..)
Any comments on this, Scott..?
Hank
I dont plan on changing bandwidthd, just getting it working on pfSense. So if it will be saved across a reboot, etc, I don't know and would be a feature of the application itself.
-
FYI:
I have started on the bandwidthd package. http://cvstrac.pfsense.com/chngview?cn=16403 -
Alrighty, test it out. It should be in the packages area now.
-
Link under services after installing package is broken.
-
yes, it is broken enough :)
-
@sdale:
Link under services after installing package is broken.
Until you start it via status services, yes. BandwidthD must create the contents!
-
I try install this package on new instaled pfsense with last snapshot from 02.02.
But i cannot start service :Feb 4 16:31:36 bandwidthd: Syntax Error "syntax error" on line 11
Feb 4 16:31:36 bandwidthd: Syntax Error "syntax error" on line 11
Feb 4 16:31:36 bandwidthd: Monitoring subnet 192.168.10.0 with netmask 192.168.10.0
Feb 4 16:31:16 bandwidthd: Syntax Error "syntax error" on line 11
Feb 4 16:31:16 bandwidthd: Syntax Error "syntax error" on line 11 -
how much time it need to create contents? i have allredy started service, link still not working
-
I try install this package on new instaled pfsense with last snapshot from 02.02.
But i cannot start service :Feb 4 16:31:36 bandwidthd: Syntax Error "syntax error" on line 11
Feb 4 16:31:36 bandwidthd: Syntax Error "syntax error" on line 11
Feb 4 16:31:36 bandwidthd: Monitoring subnet 192.168.10.0 with netmask 192.168.10.0
Feb 4 16:31:16 bandwidthd: Syntax Error "syntax error" on line 11
Feb 4 16:31:16 bandwidthd: Syntax Error "syntax error" on line 11What does line 11 say of the file /usr/local/bandwidthd/etc/bandwidthd.conf
-
Anyone having issues, please deinstall and reinstall.
-
Line 11 is : "subnet /"
When i delete this free subnet service start without problem
but… i cant acces BandwidthD under Services... still page not found :(;)
####################################################
Bandwidthd.conf
Commented out options are here to provide
documentation and represent defaults
Subnets to collect statistics on. Traffic that
matches none of these subnets will be ignored.
Syntax is either IP Subnet Mask or CIDR
subnet 192.168.1.0/24
subnet / -
Line 11 is : "subnet /"
When i delete this free subnet service start without problem
but… i cant acces BandwidthD under Services... still page not found :(;)
####################################################
Bandwidthd.conf
Commented out options are here to provide
documentation and represent defaults
Subnets to collect statistics on. Traffic that
matches none of these subnets will be ignored.
Syntax is either IP Subnet Mask or CIDR
subnet 192.168.1.0/24
subnet /Please deinstall and reinstall the package.
-
Oki… when i use clean instalation in my vmware, services/BandwidthD works fine after editing bandwidthd config...
But i need everytime when i made change manualy edit config file and delete line with free subnet info.I try this on real test PFsense box and same problem...
-
Please show me the line in question that you have to remove each time.
I think we're getting close…