Bounty $200: Monitor bandwidth use on IP adresses. NOW $250
-
I try install this package on new instaled pfsense with last snapshot from 02.02.
But i cannot start service :Feb 4 16:31:36 bandwidthd: Syntax Error "syntax error" on line 11
Feb 4 16:31:36 bandwidthd: Syntax Error "syntax error" on line 11
Feb 4 16:31:36 bandwidthd: Monitoring subnet 192.168.10.0 with netmask 192.168.10.0
Feb 4 16:31:16 bandwidthd: Syntax Error "syntax error" on line 11
Feb 4 16:31:16 bandwidthd: Syntax Error "syntax error" on line 11What does line 11 say of the file /usr/local/bandwidthd/etc/bandwidthd.conf
-
Anyone having issues, please deinstall and reinstall.
-
Line 11 is : "subnet /"
When i delete this free subnet service start without problem
but… i cant acces BandwidthD under Services... still page not found :(;)
####################################################
Bandwidthd.conf
Commented out options are here to provide
documentation and represent defaults
Subnets to collect statistics on. Traffic that
matches none of these subnets will be ignored.
Syntax is either IP Subnet Mask or CIDR
subnet 192.168.1.0/24
subnet / -
Line 11 is : "subnet /"
When i delete this free subnet service start without problem
but… i cant acces BandwidthD under Services... still page not found :(;)
####################################################
Bandwidthd.conf
Commented out options are here to provide
documentation and represent defaults
Subnets to collect statistics on. Traffic that
matches none of these subnets will be ignored.
Syntax is either IP Subnet Mask or CIDR
subnet 192.168.1.0/24
subnet /Please deinstall and reinstall the package.
-
Oki… when i use clean instalation in my vmware, services/BandwidthD works fine after editing bandwidthd config...
But i need everytime when i made change manualy edit config file and delete line with free subnet info.I try this on real test PFsense box and same problem...
-
Please show me the line in question that you have to remove each time.
I think we're getting close…
-
Everytime … this line : "subnet /"
On my realbox is config like this (2 lan and 1 wan interface)
subnet 192.168.10.0/24
subnet /
subnet 192.168.1.0/24on vmware (1 wan and 1 lan interface)
subnet 192.168.1.0/24
subnet / -
Okay, deinstall and reinstall one more time.
If it still fails to work correctly, please issue the following command from shell:
cat /usr/local/pkg/bandwidthd.inc | grep Id
-
-
Okay, I put some more code in to prevent the blank item.
Please try to deinstall and reinstall again. You should now be on 1.19 of that file.
-
Its OK now :)
Thanks
-
Alrighty, everyone else that helped with the bounty, please test and send me the rest of my $$
Thanks ! :)
-
The conf is still not being written out correctly. For example, instead of recover_cdf it needs to be "recover_cdf true".
-
The conf is still not being written out correctly. For example, instead of recover_cdf it needs to be "recover_cdf true".
Thanks. Should be fixed now. Wait atleast 5 minutes from this message to reinstall.
-
Wow thats quick. Now it has" recover_cdf on" which still isn't quite right. Also, the draw graphs tickbox seems to have no effect on the conf.
-
Wow thats quick. Now it has" recover_cdf on" which still isn't quite right. Also, the draw graphs tickbox seems to have no effect on the conf.
Okay, reinstall plz.
-
OK now it will start, but I cannot seem to generate any graphs. Has anyone successfully generated any graphs?
I get
"bandwidthd has nothing to graph. This message should be replaced by graphs in a few minutes. If it's not, please see the section titled "Known Bugs and Troubleshooting" in the README"Also IMO the bandwidthd page should open in a new window.
-
OK now it will start, but I cannot seem to generate any graphs. Has anyone successfully generated any graphs?
I get
"bandwidthd has nothing to graph. This message should be replaced by graphs in a few minutes. If it's not, please see the section titled "Known Bugs and Troubleshooting" in the README"Also IMO the bandwidthd page should open in a new window.
Yes, but it took about 20 minutes. Now is the time to be patient :)
-
ok, i reinstalled the package and it seems to be working. should it work without any config or not?
-
ok, i reinstalled the package and it seems to be working. should it work without any config or not?
What does any config or not mean?