Bounty $200: Monitor bandwidth use on IP adresses. NOW $250
-
FYI:
I have started on the bandwidthd package. http://cvstrac.pfsense.com/chngview?cn=16403 -
Alrighty, test it out. It should be in the packages area now.
-
Link under services after installing package is broken.
-
yes, it is broken enough :)
-
@sdale:
Link under services after installing package is broken.
Until you start it via status services, yes. BandwidthD must create the contents!
-
I try install this package on new instaled pfsense with last snapshot from 02.02.
But i cannot start service :Feb 4 16:31:36 bandwidthd: Syntax Error "syntax error" on line 11
Feb 4 16:31:36 bandwidthd: Syntax Error "syntax error" on line 11
Feb 4 16:31:36 bandwidthd: Monitoring subnet 192.168.10.0 with netmask 192.168.10.0
Feb 4 16:31:16 bandwidthd: Syntax Error "syntax error" on line 11
Feb 4 16:31:16 bandwidthd: Syntax Error "syntax error" on line 11 -
how much time it need to create contents? i have allredy started service, link still not working
-
I try install this package on new instaled pfsense with last snapshot from 02.02.
But i cannot start service :Feb 4 16:31:36 bandwidthd: Syntax Error "syntax error" on line 11
Feb 4 16:31:36 bandwidthd: Syntax Error "syntax error" on line 11
Feb 4 16:31:36 bandwidthd: Monitoring subnet 192.168.10.0 with netmask 192.168.10.0
Feb 4 16:31:16 bandwidthd: Syntax Error "syntax error" on line 11
Feb 4 16:31:16 bandwidthd: Syntax Error "syntax error" on line 11What does line 11 say of the file /usr/local/bandwidthd/etc/bandwidthd.conf
-
Anyone having issues, please deinstall and reinstall.
-
Line 11 is : "subnet /"
When i delete this free subnet service start without problem
but… i cant acces BandwidthD under Services... still page not found :(;)
####################################################
Bandwidthd.conf
Commented out options are here to provide
documentation and represent defaults
Subnets to collect statistics on. Traffic that
matches none of these subnets will be ignored.
Syntax is either IP Subnet Mask or CIDR
subnet 192.168.1.0/24
subnet / -
Line 11 is : "subnet /"
When i delete this free subnet service start without problem
but… i cant acces BandwidthD under Services... still page not found :(;)
####################################################
Bandwidthd.conf
Commented out options are here to provide
documentation and represent defaults
Subnets to collect statistics on. Traffic that
matches none of these subnets will be ignored.
Syntax is either IP Subnet Mask or CIDR
subnet 192.168.1.0/24
subnet /Please deinstall and reinstall the package.
-
Oki… when i use clean instalation in my vmware, services/BandwidthD works fine after editing bandwidthd config...
But i need everytime when i made change manualy edit config file and delete line with free subnet info.I try this on real test PFsense box and same problem...
-
Please show me the line in question that you have to remove each time.
I think we're getting close…
-
Everytime … this line : "subnet /"
On my realbox is config like this (2 lan and 1 wan interface)
subnet 192.168.10.0/24
subnet /
subnet 192.168.1.0/24on vmware (1 wan and 1 lan interface)
subnet 192.168.1.0/24
subnet / -
Okay, deinstall and reinstall one more time.
If it still fails to work correctly, please issue the following command from shell:
cat /usr/local/pkg/bandwidthd.inc | grep Id
-
-
Okay, I put some more code in to prevent the blank item.
Please try to deinstall and reinstall again. You should now be on 1.19 of that file.
-
Its OK now :)
Thanks
-
Alrighty, everyone else that helped with the bounty, please test and send me the rest of my $$
Thanks ! :)
-
The conf is still not being written out correctly. For example, instead of recover_cdf it needs to be "recover_cdf true".