Keep loosing WAN IP Address - dhclient does not seem to do update
-
Then I am confused… What is vr0?
-
The vr0 is the network interface of the firewall of our second link to workstations. It is connected to a router.
-
The vr0 is the network interface of the firewall of our second link to workstations. It is connected to a router.
This makes the situation even more puzzling. Why would it think that you are unplugging or plugging in vr0?!
-
Check your gmail account freax … I am working on this issue now and need your help. I cannot guarantee when I'll have time or interest to work on it again so right now is your chance to get it solved!
-
Please test the latest snapshot if you are still having problems and post the logs. I have added some debugging information.
-
im using snapshot 02-02 and it still dosn´t work:
Feb 3 00:46:20 dhclient[275]: exiting.
Feb 3 00:46:20 dhclient[275]: exiting.
Feb 3 00:46:20 dhclient[275]: short write: wanted 21 got 0 bytes
Feb 3 00:46:20 dhclient[275]: short write: wanted 21 got 0 bytes
Feb 3 00:46:20 dhclient[275]: DHCPACK from 90.224.168.1
Feb 3 00:46:20 dhclient[275]: DHCPREQUEST on rl0 to 255.255.255.255 port 67 -
Hi again.
I'm at 180 km from the firewall so I will test it monday.
Thanks.
-
I've been experiencing this problem lately and it still has not been resolved for myself either.
ISP: ZoomInternet
I'm not sure my exact snapshot, but it was most recently updated on Jan29.
Any info that I can provide to help get this resolved I am more than willing to give.
-
I've been experiencing this problem lately and it still has not been resolved for myself either.
ISP: ZoomInternet
I'm not sure my exact snapshot, but it was most recently updated on Jan29.
Any info that I can provide to help get this resolved I am more than willing to give.
Please update to a recent snapshot like I asked everyone else to do.
-
Anyone have an update? Or is the problem finally fixed with recent snapshots?
-
do you mean snapshot 02-02 ?? if you do, the problem is not fixed =(
still ending up with "short write: wanted 21 got 0 bytes" -
Yes, the updated snapshot as of a day or so.
Please provide the entire log file.. As much detail as possible. You can X out IP addresses but I need to see the chain of events from before and after this happens.
Also, for the record, who uses PPPOE and who has just a regular DHCP WAN?
-
I've updated but still now it didn't stop. Maybe I can turn off then on the router.
I have 2 links:
- fxp0 that is our pppoe wan that is used for servers and DMZ;
- vr0 which is in opt1 that serves our worksations; This is connected to a router trought a diffrent ip.
I think I had 2 different problems:
- pppoe (fxp0) went down from time to time and I think it was solved with some latest update. This was the worst because sometimes we dind't have vpn at weekends. I think it's solved.
- now I still have the last problem which the workstations don't have internet with some dhcp problem. There isn't dhcp activated neither on router or firewall.
[]'s
Yes, the updated snapshot as of a day or so.
Please provide the entire log file.. As much detail as possible. You can X out IP addresses but I need to see the chain of events from before and after this happens.
Also, for the record, who uses PPPOE and who has just a regular DHCP WAN?
-
I have made some more changes for debugging. Please test todays snapshot.
Thanks!
-
Confirm me that its the pfSense-Full-Update-1.0.1-SNAPSHOT-02-02-2007.tgz dated from today please.
-
No, todays date is the 6th. Images are still building. Check back in an hour.
-
It's from http://snapshots.pfsense.com/FreeBSD6/RELENG_1/updates/ ? Right ?
There isn't any from today. -
It's there now. Thanks.
-
http://snapshots.pfsense.com/FreeBSD6/RELENG_1/updates/pfSense-Full-Update-1.0.1-SNAPSHOT-02-06-2007.tgz
-
Hi again.
I did the update but i think I can simulate what's happening.
The firewall interface and router, both have fixed ip's so what I did was unplug then plug again for 2 seconds. Then, no Internet:
Feb 6 20:23:03 php: : Hotplug event detected for vr0 but ignoring since interface is not set for DHCP
Feb 6 20:23:03 php: : Processing vr0 - start
Feb 6 20:23:03 php: : Arguments passed rc.linkup. 'vr0 start '
Feb 6 20:23:03 check_reload_status: rc.linkup starting
Feb 6 20:22:58 kernel: vr0: link state changed to UP
Feb 6 20:22:58 php: : Hotplug event detected for vr0 but ignoring since interface is not set for DHCP
Feb 6 20:22:58 php: : Processing vr0 - stop
Feb 6 20:22:58 php: : Arguments passed rc.linkup. 'vr0 stop '
Feb 6 20:22:58 check_reload_status: rc.linkup starting
Feb 6 20:22:55 kernel: vr0: link state changed to DOWN
Feb 6 20:22:01 syslogd: kernel boot file is /boot/kernel/kernelThe same result before I think.
I will wait that this happens naturaly but this may help for now.
Thanks.