Squid Returned to Packages *** PLEASE TEST ***

ju5t4s

Hi, can you recompile squid with –enable-arp-acl option, because, arp acls not working.

thank you very much :)

mhab12

Any luck yet with white list only or any kind of wild card in the black list field? Just tried with a clean install of snapshot 1-24 and I'm still making it to any site. Maybe we'll have to do something like ipCop and create a whitelist only check box. I suspect in their implementation it removes the blacklist_acl completely and leaves only the whitelist in squid.conf. Just a thought, my programming / text edit skills in FreeBSD are marginal at best.

Any ideas data?

AkumaKuruma

what kind of wildcard are you looking for in the blocked domains? trying to be able to block domains like sex ? cuz that WOULD be nice.
currently though it can block all subdomains of a domain. wonder if it will work on top domains. would be neat if i could block, say, all of .ru (havent tried so it may already do it). course i could do the same thing by running an internal DNS.

ju5t4s

There is also some difficulties if i setup my proxy without transparent proxy and Allow users on interfase, with Allowed subnets, then squid.inc create

acl allowed_subnets src XXX.XXX.XXX.XXX/XX

but there is no

http_access allow allowed_subnets

also waiting for recompiled squid binaries with –arp

mhab12

Blacklisting TLDs does work as reported in this post some time ago. I want to be able to block all sites not explicitly named in my whitelist.

ju5t4s

for whitelisting and blacklisting use wildcard "."

example for blacklist:

.sex.
.xxx.
.ch
.net
.123456.

if you leave only "." dot in list then your users can access only sites listed in Whitelist

Best regards
Ju5t4s

mhab12

The period worked!!!! Thank you so much ju5t4s.

PC_Arcade

@AkumaKuruma:

what kind of wildcard are you looking for in the blocked domains? trying to be able to block domains like sex ? cuz that WOULD be nice.
currently though it can block all subdomains of a domain. wonder if it will work on top domains. would be neat if i could block, say, all of .ru (havent tried so it may already do it). course i could do the same thing by running an internal DNS.

I tried (as a matter of interest) to block all .ru domains, but using .ru in the blocked area blocks sites like this forum :lol: I'm not sure it should though.

It shouldn't block forum should it? I can understand it blocking foru, as there's nothing after the ru and it would match the wildcard pattern, but not forum

ju5t4s

edit manualy file /usr/local/pkg/squid.inc

and change "dstdom_regex -i" to "dstdomain"

you can change it for you filtering needs

more about acl types you can read http://wiki.squid-cache.org/SquidFaq/SquidAcl#head-021f45033c4ee1b1fc5bdd4f5c49ddcd08f45bd1

*sorry for my poor english

wingnut

I have been working on getting squid to start and stop propery. I am using 1.0.1-SNAPSHOT-02-08-2007.
I have some suggestions for changes to improve the situation:

in /etc/rc.newwanip, insert:
exec("/etc/rc.stop_packages");
before
exec("/etc/rc.start_packages");
in /etc/rc.stop_packages, is package synching necessary?
in /usr/local/etc/rc.d/proxy_monitor.sh, it is necessary to examine the parameter to determine if start, stop or restart should be performed. I have attached the updated file proxy_monitor.sh.txt. As package sync overwrites this file, I have been able to test only by commenting out package sync in start_packages and stop_packages.

It would certainly help to have these changes released in a snapshot.

proxy_monitor.sh.txt

PC_Arcade

Any ideas why in the services tab I have ~30 instances of squid running?

I've rebooted and it still shows them all when I reboot

databeestje

no idea yet.

I am sorely out of time at work to work on squid this month.

jahonix

First I had 5 instances of NTPserver running. De- and re-install helped this service but then it were 4 or 5 squid services.
Deinstalled squid and reinstall cured this finally.

All of this was after upgrading to 1.0.1 snapshot Feb 09 OR Feb 06 - don't know exactly anymore.

PC_Arcade

Yeah, I find from time to time a package goes a bit mental and starts running multiple instances of itself, but squid, even after an uninstall / reinstall cycle was exactly the same, I was running literally 30 instances!

mhab12

Just upgraded to 2/14 snapshot. Squid had lots of instances here too. I uninstalled Squid (via GUI), rebooted, reisntalled (via GUI), and rebooted and all was well. On a side note, the 2/14 snapshot upgrade deactivated all my firewall rules (the little green triangle was unclicked).

hadi57

hi,

i installed squid and it is running ok, my isp uses proxy; if i put proxy in the upstream proxy in squid configuration, the user name password pops up for my clients to authenticate, even if i put the username and password that my isp gave me in the username and password fields of squid, the authentication still pops up when any body try to open a browser, bu the problem will not raise up if they put the proxy and the port in their browser.

how to deal with this in a way that my clients dont need to put the proxy in their browser

thank you

xabbu

Hello,

I tested the proxy and found out that, wenn you enabled the proxy in normal or transparency mode the NAT for the clients who use the proxy doesent work.
I searched for this in the internet and found out that you should enter
forwared_for off
in the squid.conf.
Then the clients which use the proxy will be NATted to the WAN IP.

Please can you fix it.

Thanks,
xabbu 8)

trendchiller

for the old squid package i once made a diff… when this could help you'll find them here:

http://pfsense.trendchiller.com/squid/

But as I said these were for the old versions of the squid package…

hadi57

hi again

where is the file squid.conf, and in what line i should insert the forwarded_for off???

thank you

trendchiller

have a look in /usr/local/etc/squid/squid.conf

then add the line somewhere near the beginning of the acls in the file…