Squid Returned to Packages *** PLEASE TEST ***
-
no idea yet.
I am sorely out of time at work to work on squid this month.
-
First I had 5 instances of NTPserver running. De- and re-install helped this service but then it were 4 or 5 squid services.
Deinstalled squid and reinstall cured this finally.All of this was after upgrading to 1.0.1 snapshot Feb 09 OR Feb 06 - don't know exactly anymore.
-
Yeah, I find from time to time a package goes a bit mental and starts running multiple instances of itself, but squid, even after an uninstall / reinstall cycle was exactly the same, I was running literally 30 instances!
-
Just upgraded to 2/14 snapshot. Squid had lots of instances here too. I uninstalled Squid (via GUI), rebooted, reisntalled (via GUI), and rebooted and all was well. On a side note, the 2/14 snapshot upgrade deactivated all my firewall rules (the little green triangle was unclicked).
-
hi,
i installed squid and it is running ok, my isp uses proxy; if i put proxy in the upstream proxy in squid configuration, the user name password pops up for my clients to authenticate, even if i put the username and password that my isp gave me in the username and password fields of squid, the authentication still pops up when any body try to open a browser, bu the problem will not raise up if they put the proxy and the port in their browser.
how to deal with this in a way that my clients dont need to put the proxy in their browser
thank you
-
Hello,
I tested the proxy and found out that, wenn you enabled the proxy in normal or transparency mode the NAT for the clients who use the proxy doesent work.
I searched for this in the internet and found out that you should enter
forwared_for off
in the squid.conf.
Then the clients which use the proxy will be NATted to the WAN IP.Please can you fix it.
Thanks,
xabbu 8) -
for the old squid package i once made a diff… when this could help you'll find them here:
http://pfsense.trendchiller.com/squid/
But as I said these were for the old versions of the squid package…
-
hi again
where is the file squid.conf, and in what line i should insert the forwarded_for off???
thank you
-
have a look in /usr/local/etc/squid/squid.conf
then add the line somewhere near the beginning of the acls in the file…
-
Hello,
if someone interested here are my version of
squid.inc
/* $Id: squid.inc,v 1.24-xabbu 2007/02/19 20:04:46 xabbu Exp $ */ /* squid.inc Copyright (C) 2006 Scott Ullrich Copyright (C) 2006 Fernando Lemos All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1\. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2\. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ require_once('globals.inc'); require_once('config.inc'); require_once('util.inc'); require_once('pfsense-utils.inc'); require_once('pkg-utils.inc'); require_once('filter.inc'); require_once('service-utils.inc'); define('SQUID_CONFBASE', '/usr/local/etc/squid'); define('SQUID_ACLDIR', '/var/squid/acl'); define('SQUID_PASSWD', '/var/etc/squid.passwd'); $valid_acls = array(); function squid_get_real_interface_address($iface) { global $config; $iface = convert_friendly_interface_to_real_interface_name($iface); $line = trim(shell_exec("ifconfig $iface | grep inet | grep -v inet6")); list($dummy, $ip, $dummy2, $netmask) = explode(" ", $line); return array($ip, long2ip(hexdec($netmask))); } function squid_chown_recursive($dir, $user, $group) { chown($dir, $user); chgrp($dir, $group); $handle = opendir($dir) ; while (($item = readdir($handle)) !== false) { if (($item != ".") && ($item != "..")) { $path = "$dir/$item"; if (is_dir($path)) squid_chown_recursive($path, $user, $group); else { chown($path, $user); chgrp($path, $group); } } } } /* setup cache */ function squid_dash_z() { global $config; $settings = $config['installedpackages']['squidcache']['config'][0]; $cachedir =($settings['harddisk_cache_location'] ? $settings['harddisk_cache_location'] : '/var/squid/cache'); if(!is_dir($cachedir.'/')) { log_error("Creating Squid cache dir $cachedir"); make_dirs($cachedir); squid_chown_recursive($cachedir, 'proxy', 'proxy'); } if(!is_dir($cachedir.'/00/')) { log_error("Creating squid cache subdirs in $cachedir"); mwexec("/usr/local/sbin/squid -k shutdown"); sleep(5); mwexec("/usr/local/sbin/squid -k kill"); mwexec("/usr/local/sbin/squid -z"); } } function squid_is_valid_acl($acl) { global $valid_acls; if(!is_array($valid_acls)) return; return in_array($acl, $valid_acls); } function squid_install_command() { global $config; /* migrate existing csv config fields */ $settingsauth = $config['installedpackages']['squidauth']['config'][0]; $settingscache = $config['installedpackages']['squidcache']['config'][0]; $settingsnac = $config['installedpackages']['squidnac']['config'][0]; /* migrate auth settings */ if (!empty($settingsauth['no_auth_hosts'])) { if(strstr($settingsauth['no_auth_hosts'], ",")) { $settingsauth['no_auth_hosts'] = base64_encode(implode("\n", explode(",", $settingsauth['no_auth_hosts']))); $config['installedpackages']['squidauth']['config'][0]['no_auth_hosts'] = $settingsauth['no_auth_hosts']; } } /* migrate cache settings */ if (!empty($settingscache['donotcache'])) { if(strstr($settingscache['donotcache'], ",")) { $settingscache['donotcache'] = base64_encode(implode("\n", explode(",", $settingscache['donotcache']))); $config['installedpackages']['squidcache']['config'][0]['donotcache'] = $settingscache['donotcache']; } } /* migrate nac settings */ if(! empty($settingsnac['allowed_subnets'])) { if(strstr($settingsnac['allowed_subnets'], ",")) { $settingsnac['allowed_subnets'] = base64_encode(implode("\n", explode(",", $settingsnac['allowed_subnets']))); $config['installedpackages']['squidnac']['config'][0]['allowed_subnets'] = $settingsnac['allowed_subnets']; } } if(! empty($settingsnac['banned_hosts'])) { if(strstr($settingsnac['banned_hosts'], ",")) { $settingsnac['banned_hosts'] = base64_encode(implode("\n", explode(",", $settingsnac['banned_hosts']))); $config['installedpackages']['squidnac']['config'][0]['banned_hosts'] = $settingsnac['banned_hosts']; } } if(! empty($settingsnac['banned_macs'])) { if(strstr($settingsnac['banned_macs'], ",")) { $settingsnac['banned_macs'] = base64_encode(implode("\n", explode(",", $settingsnac['banned_macs']))); $config['installedpackages']['squidnac']['config'][0]['banned_macs'] = $settingsnac['banned_macs']; } } if(! empty($settingsnac['unrestricted_hosts'])) { if(strstr($settingsnac['unrestricted_hosts'], ",")) { $settingsnac['unrestricted_hosts'] = base64_encode(implode("\n", explode(",", $settingsnac['unrestricted_hosts']))); $config['installedpackages']['squidnac']['config'][0]['unrestricted_hosts'] = $settingsnac['unrestricted_hosts']; } } if(! empty($settingsnac['unrestricted_macs'])) { if(strstr($settingsnac['unrestricted_macs'], ",")) { $settingsnac['unrestricted_macs'] = base64_encode(implode("\n", explode(",", $settingsnac['unrestricted_macs']))); $config['installedpackages']['squidnac']['config'][0]['unrestricted_macs'] = $settingsnac['unrestricted_macs']; } } if(! empty($settingsnac['whitelist'])) { if(strstr($settingsnac['whitelist'], ",")) { $settingsnac['whitelist'] = base64_encode(implode("\n", explode(",", $settingsnac['whitelist']))); $config['installedpackages']['squidnac']['config'][0]['whitelist'] = $settingsnac['whitelist']; } } if(! empty($settingsnac['blacklist'])) { if(strstr($settingsnac['blacklist'], ",")) { $settingsnac['blacklist'] = base64_encode(implode("\n", explode(",", $settingsnac['blacklist']))); $config['installedpackages']['squidnac']['config'][0]['blacklist'] = $settingsnac['blacklist']; } } write_config(); /* create cache */ squid_dash_z(); /* make sure pinger is executable */ exec("/bin/chmod a+x /usr/local/libexec/squid/pinger"); exec("/bin/rm /usr/local/etc/rc.d/squid"); $rc = array(); $rc['file'] = 'squid.sh'; $rc['start'] = <<<eod<br>if [ -z "`ps auxw | grep "[s]quid -D"|awk '{print $2}'`" ];then /usr/local/sbin/squid -D fi EOD; $rc['stop'] = <<<eod<br>/usr/local/sbin/squid -k shutdown # Just to be sure... sleep 5 killall -9 squid 2>/dev/null killall pinger 2>/dev/null EOD; $rc['restart'] = <<<eod<br>if [ -z "`ps auxw | grep "[s]quid -D"|awk '{print $2}'`" ];then /usr/local/sbin/squid -D else /usr/local/sbin/squid -k reconfigure fi EOD; write_rcfile($rc); foreach (array( SQUID_CONFBASE, SQUID_ACLDIR, ) as $dir) { make_dirs($dir); squid_chown_recursive($dir, 'proxy', 'proxy'); } /* kill any running proxy alarm scripts */ log_error("Stopping any running proxy monitors"); mwexec("ps awux | grep \"proxy_monitor\" | grep -v \"grep\" | grep -v \"php\" | awk '{ print $2 }' | xargs kill"); sleep(1); if (!file_exists(SQUID_CONFBASE . '/mime.conf') && file_exists(SQUID_CONFBASE . '/mime.conf.default')) copy(SQUID_CONFBASE . '/mime.conf.default', SQUID_CONFBASE . '/mime.conf'); squid_dash_z(); if (!is_service_running('squid')) { log_error("Starting Squid"); mwexec_bg("/usr/local/sbin/squid -D"); } else { log_error("Reloading Squid for configuration sync"); mwexec("/usr/local/sbin/squid -k reconfigure"); } /* restart proxy alarm scripts */ log_error("Starting a proxy monitor script"); mwexec_bg("/usr/local/etc/rc.d/proxy_monitor.sh"); filter_configure(); } function squid_deinstall_command() { global $config; $settings = $config['installedpackages']['squidcache']['config'][0]; $cachedir =($settings['harddisk_cache_location'] ? $settings['harddisk_cache_location'] : '/var/squid/cache'); $logdir = ($settings['log_dir'] ? $settings['log_dir'] : '/var/squid/log'); mwexec('rm -rf $cachedir'); mwexec('rm -rf $logdir'); mwexec('rm -f /usr/local/etc/rc.d/proxy_monitor.sh'); mwexec("ps awux | grep \"proxy_monitor\" | grep -v \"grep\" | grep -v \"php\" | awk '{ print $2 }' | xargs kill"); mwexec("ps awux | grep \"squid\" | grep -v \"grep\" | awk '{ print $2 }' | xargs kill"); mwexec("ps awux | grep \"dnsserver\" | grep -v \"grep\" | awk '{ print $2 }' | xargs kill"); mwexec("ps awux | grep \"unlinkd\" | grep -v \"grep\" | awk '{ print $2 }' | xargs kill"); filter_configure(); } function squid_before_form_general($pkg) { $values = get_dir(SQUID_CONFBASE . '/errors/'); // Get rid of '..' and '.' array_shift($values); array_shift($values); $name = array(); foreach ($values as $value) $names[] = implode(" ", explode("_", $value)); $i = 0; foreach ($pkg['fields']['field'] as $field) { if ($field['fieldname'] == 'error_language') break; $i++; } $field = &$pkg['fields']['field'][$i]; for ($i = 0; $i < count($values) - 1; $i++) $field['options']['option'][] = array('name' => $names[$i], 'value' => $values[$i]); } function squid_validate_general($post, $input_errors) { global $config; $icp_port = trim($post['icp_port']); if (!empty($icp_port) && !is_port($icp_port)) $input_errors[] = 'You must enter a valid port number in the \'ICP port\' field'; if (substr($post['log_dir'], -1, 1) == '/') $input_errors[] = 'You may not end log location with an / mark'; if ($post['log_dir']{0} != '/') $input_errors[] = 'You must start log location with a / mark'; if (strlen($post['log_dir']) <= 3) $input_errors[] = "That is not a valid log location dir"; $webgui_port = $config['system']['webgui']['port']; if(($config['system']['webgui']['port'] == "") && ($config['system']['webgui']['protocol'] == "http")) { $webgui_port = 80; } if (($post['transparent_proxy'] != 'on') && ($port == $webgui_port)) { $input_errors[] = "You can not run squid on the same port as the webgui"; } } function squid_validate_upstream($post, $input_errors) { if ($post['proxy_forwarding'] == 'on') { $addr = trim($post['proxy_addr']); if (empty($addr)) $input_errors[] = 'The field \'Hostname\' is required'; else { if (!is_ipaddr($addr) && !is_domain($addr)) $input_errors[] = 'You must enter a valid IP address or host name in the \'Proxy hostname\' field'; } foreach (array('proxy_port' => 'TCP port', 'icp_port' => 'ICP port') as $field => $name) { $port = trim($post[$field]); if (empty($port)) $input_errors[] = "The field '$name' is required"; else { if (!is_port($port)) $input_errors[] = "The field '$name' must contain a valid port number, between 0 and 65535"; } } } } function squid_validate_cache($post, $input_errors) { $num_fields = array( 'harddisk_cache_size' => 'Hard disk cache size', 'memory_cache_size' => 'Memory cache size', 'maximum_object_size' => 'Maximum object size', ); foreach ($num_fields as $field => $name) { $value = trim($post[$field]); if (!is_numeric($value) || ($value < 0)) $input_errors[] = "You must enter a valid value for '$field'"; } $value = trim($post['minimum_object_size']); if (!is_numeric($value) || ($value < 0)) $input_errors[] = 'You must enter a valid value for \'Minimum object size\''; if ($post['donotcache'] != "") { foreach (split("\n", $post['donotcache']) as $host) { $host = trim($host); if (!is_ipaddr($host) && !is_domain($host)) $input_errors[] = "The host '$host' is not a valid IP or host name"; } } squid_dash_z(); } function squid_validate_nac($post, $input_errors) { $allowed_subnets = explode("\n", $post['allowed_subnets']); foreach ($allowed_subnets as $subnet) { $subnet = trim($subnet); if (!empty($subnet) && !is_subnet($subnet)) $input_errors[] = "The subnet '$subnet' is not a valid CIDR range"; } foreach (array( 'unrestricted_hosts', 'banned_hosts') as $hosts) { foreach (explode("\n", $post[$hosts]) as $host) { $host = trim($host); if (!empty($host) && !is_ipaddr($host)) $input_errors[] = "The host '$host' is not a valid IP address"; } } foreach (array('unrestricted_macs', 'banned_macs') as $macs) { foreach (explode("\n", $post[$macs]) as $mac) { $mac = trim($mac); if (!empty($mac) && !is_macaddr($mac)) $input_errors[] = "The mac '$mac' is not a valid MAC address"; } } foreach (explode(",", $post['timelist']) as $time) { $time = trim($time); if (!empty($time) && !squid_is_timerange($time)) $input_errors[] = "The time range '$time' is not a valid time range"; } } function squid_validate_traffic($post, $input_errors) { $num_fields = array( 'max_download_size' => 'Maximum download size', 'max_upload_size' => 'Maximum upload size', 'perhost_throttling' => 'Per-host bandwidth throttling', 'overall_throttling' => 'Overall bandwidth throttling', ); foreach ($num_fields as $field => $name) { $value = trim($post[$field]); if (!is_numeric($value) || ($value < 0)) $input_errors[] = "The field '$name' must contain a positive number"; } } function squid_validate_auth($post, $input_errors) { $num_fields = array( array('auth_processes', 'Authentication processes', 1), array('auth_ttl', 'Authentication TTL', 0), ); foreach ($num_fields as $field) { $value = trim($post[$field[0]]); if (!empty($value) && (!is_numeric($value) || ($value < $field[2]))) $input_errors[] = "The field '{$field[1]}' must contain a valid number greater than {$field[2]}"; } $auth_method = $post['auth_method']; if (($auth_method != 'none') && ($auth_method != 'local')) { $server = trim($post['auth_server']); if (empty($server)) $input_errors[] = 'The field \'Authentication server\' is required'; else if (!is_ipaddr($server) && !is_domain($server)) $input_errors[] = 'The field \'Authentication server\' must contain a valid IP address or domain name'; $port = trim($post['auth_server_port']); if (!empty($port) && !is_port($port)) $input_errors[] = 'The field \'Authentication server port\' must contain a valid port number'; switch ($auth_method) { case 'ldap': $user = trim($post['ldap_user']); if (empty($user)) $input_errors[] = 'The field \'LDAP server user DN\' is required'; else if (!$user) $input_errors[] = 'The field \'LDAP server user DN\' must be a valid domain name'; break; case 'radius': $secret = trim($post['radius_secret']); if (empty($secret)) $input_errors[] = 'The field \'RADIUS secret\' is required'; break; case 'msnt': foreach (explode(",", trim($post['msnt_secondary'])) as $server) { if (!empty($server) && !is_ipaddr($server) && !is_domain($server)) $input_errors[] = "The host '$server' is not a valid IP address or domain name"; } break; } $no_auth = explode("\n", $post['no_auth_hosts']); foreach ($no_auth as $host) { $host = trim($host); if (!empty($host) && !is_subnet($host)) $input_errors[] = "The host '$host' is not a valid CIDR range"; } } } function squid_resync_general() { global $g, $config, $valid_acls; $settings = $config['installedpackages']['squid']['config'][0]; $conf = "# This file is automatically generated by pfSense\n"; $conf = "# Do not edit manually!\n"; $port = ($settings['proxy_port'] ? $settings['proxy_port'] : 3128); $ifaces = ($settings['active_interface'] ? $settings['active_interface'] : 'lan'); $real_ifaces = array(); foreach (explode(",", $ifaces) as $i => $iface) { $real_ifaces[] = squid_get_real_interface_address($iface); if($real_ifaces[$i][0]) { $conf .= "http_port {$real_ifaces[$i][0]}:$port\n"; } } if (($settings['transparent_proxy'] == 'on')) { $conf .= "http_port 127.0.0.1:80 transparent\n"; } $icp_port = ($settings['icp_port'] ? $settings['icp_port'] : 0); $pidfile = "{$g['varrun_path']}/squid.pid"; $language = ($settings['error_language'] ? $settings['error_language'] : 'English'); $errordir = SQUID_CONFBASE . '/errors/' . $language; $hostname = ($settings['visible_hostname'] ? $settings['visible_hostname'] : 'localhost'); $email = ($settings['admin_email'] ? $settings['admin_email'] : 'admin@localhost'); $logdir = ($settings['log_dir'] ? $settings['log_dir'] : '/var/squid/log'); $logdir_cache = $logdir . '/cache.log'; $logdir_access = ($settings['log_enabled'] == 'on' ? $logdir . '/access.log' : '/dev/null'); $forwarded_for = ($settings['forwarded_for'] == 'on' ? 'off' : 'on'); $conf .= <<<eod<br>icp_port $icp_port pid_filename $pidfile cache_effective_user proxy cache_effective_group proxy error_directory $errordir visible_hostname $hostname cache_mgr $email forwarded_for $forwarded_for access_log $logdir_access cache_log $logdir_cache cache_store_log none shutdown_lifetime 3 seconds EOD; if ($settings['allow_interface'] == 'on') { $src = ''; foreach ($real_ifaces as $iface) { list($ip, $mask) = $iface; $ip = long2ip(ip2long($ip) & ip2long($mask)); $src .= " $ip/$mask"; } $conf .= "# Allow local network(s) on interface(s)\n"; $conf .= "acl localnet src $src\n"; $valid_acls[] = 'localnet'; } return $conf; } function squid_resync_cache() { global $config; $settings = $config['installedpackages']['squidcache']['config'][0]; $cachedir =($settings['harddisk_cache_location'] ? $settings['harddisk_cache_location'] : '/var/squid/cache'); $disk_cache_size = ($settings['harddisk_cache_size'] ? $settings['harddisk_cache_size'] : 100); $level1 = ($settings['level1_subdirs'] ? $settings['level1_subdirs'] : 16); $memory_cache_size = ($settings['memory_cache_size'] ? $settings['memory_cache_size'] : 8); $max_objsize = ($settings['maximum_object_size'] ? $settings['maximum_object_size'] : 10); $min_objsize = ($settings['minimum_object_size'] ? $settings['minimum_object_size'] : 0); $cache_policy = ($settings['cache_replacement_policy'] ? $settings['cache_replacement_policy'] : 'heap LFUDA'); $memory_policy = ($settings['memory_replacement_policy'] ? $settings['memory_replacement_policy'] : 'heap GDSF'); $offline_mode = ($settings['enable_offline'] == 'on' ? 'on' : 'off'); $conf = <<<eod<br>cache_dir diskd $cachedir $disk_cache_size $level1 256 cache_mem $memory_cache_size MB maximum_object_size $max_objsize KB minimum_object_size $min_objsize KB cache_replacement_policy $cache_policy memory_replacement_policy $memory_policy offline_mode $offline_mode EOD; $donotcache = base64_decode($settings['donotcache']); if (!empty($donotcache)) { file_put_contents(SQUID_ACLDIR . '/donotcache.acl', $donotcache); $conf .= 'acl donotcache dstdomain "' . SQUID_ACLDIR . "/donotcache.acl\"\n"; $conf .= 'no_cache deny donotcache'; } return $conf; } function squid_resync_upstream() { global $config; $settings = $config['installedpackages']['squidupstream']['config'][0]; $conf = ''; if ($settings['proxy_forwarding'] == 'on') { $conf .= "cache_peer {$settings['proxy_addr']} parent {$settings['proxy_port']} {$settings['icp_port']} "; if (!empty($settings['username'])) $conf .= " login={$settings['username']}"; if (!empty($settings['password'])) $conf .= ":{$settings['password']}"; } return $conf; } function squid_resync_redirector() { global $config; $httpav_enabled = ($config['installedpackages']['clamav']['config'][0]['scan_http'] == 'on'); if ($httpav_enabled) { $conf = "redirect_program /usr/local/bin/squirm\n"; } else { $conf = "# No redirector configured\n"; } return $conf; } function squid_resync_nac() { global $config, $valid_acls; $settings = $config['installedpackages']['squidnac']['config'][0]; $webgui_port = $config['system']['webgui']['port']; $conf = << <eod<br># Setup some default acls acl all src 0.0.0.0/0 acl localhost src 127.0.0.1 acl safeports port 21 70 80 210 280 443 488 563 591 631 777 901 $webgui_port 1025-65535 acl sslports port 443 563 $webgui_port acl manager proto cache_object acl purge method PURGE acl connect method CONNECT acl dynamic urlpath_regex cgi-bin \? EOD; $allowed_subnets = explode("\n", base64_decode($settings['allowed_subnets'])); $allowed = ""; foreach ($allowed_subnets as $subnet) { if(!empty($subnet)) { $subnet = trim($subnet); $allowed .= "$subnet "; } } if (!empty($allowed)) { $conf .= "acl allowed_subnets src $allowed\n"; $valid_acls[] = 'allowed_subnets'; } $options = array( 'unrestricted_hosts' => 'src', 'banned_hosts' => 'src', 'whitelist' => 'dstdom_regex -i', 'blacklist' => 'dstdom_regex -i', ); foreach ($options as $option => $directive) { $contents = base64_decode($settings[$option]); if (!empty($contents)) { file_put_contents(SQUID_ACLDIR . "/$option.acl", $contents); $conf .= "acl $option $directive \"" . SQUID_ACLDIR . "/$option.acl\"\n"; $valid_acls[] = $option; } } $conf .= <<<eod<br>cache deny dynamic http_access allow manager localhost http_access deny manager http_access allow purge localhost http_access deny purge http_access deny !safeports http_access deny CONNECT !sslports # Always allow localhost connections http_access allow localhost EOD; return $conf; } function squid_resync_traffic() { global $config, $valid_acls; if(!is_array($valid_acls)) return; $settings = $config['installedpackages']['squidtraffic']['config'][0]; $conf = ''; $up_limit = ($settings['max_upload_size'] ? $settings['max_upload_size'] : 0); $down_limit = ($settings['max_download_size'] ? $settings['max_download_suze'] : 0); $conf .= "request_body_max_size $up_limit KB\n"; $conf .= 'reply_body_max_size ' . ($down_limit * 1024) . " allow all\n"; // Only apply throttling past 10MB // XXX: Should this really be hardcoded? $threshold = 10 * 1024 * 1024; $overall = $settings['overall_throttling']; if (!isset($overall) || ($overall == 0)) $overall = -1; else $overall *= 1024; $perhost = $settings['perhost_throttling']; if (!isset($perhost) || ($perhost == 0)) $perhost = -1; else $perhost *= 1024; $conf .= <<<eod<br>delay_pools 1 delay_class 1 2 delay_parameters 1 $overall/$overall $perhost/$perhost delay_initial_bucket_level 100 EOD; if(! empty($settings['unrestricted_hosts'])) { foreach (array('unrestricted_hosts') as $item) { if (in_array($item, $valid_acls)) $conf .= "# Do not throttle unrestricted hosts\n"; $conf .= "delay_access 1 deny $item\n"; } } if ($settings['throttle_specific'] == 'on') { $exts = array(); $binaries = 'bin,cab,sea,ar,arj,tar,tgz,gz,tbz,bz2,zip,exe,com'; $cdimages = 'iso,bin,mds,nrg,gho,bwt,b5t,pqi'; $multimedia = 'aiff?,asf,avi,divx,mov,mp3,mp4,mpe?g,qt,ra?m'; foreach (array( 'throttle_binaries' => $binaries, 'throttle_cdimages' => $cdimages, 'throttle_multimedia' => $multimedia) as $field => $set) { if ($settings[$field] == 'on') $exts = array_merge($exts, explode(",", $set)); } foreach (explode(",", $settings['throttle_others']) as $ext) { if (!empty($ext)) $exts[] = $ext; } $contents = ''; foreach ($exts as $ext) $contents .= "\.$ext\$\n"; file_put_contents(SQUID_ACLDIR . '/throttle_exts.acl', $contents); $conf .= "# Throttle extensions matched in the url\n"; $conf .= "acl throttle_exts urlpath_regex -i \"" . SQUID_ACLDIR . "/throttle_exts.acl\"\n"; $conf .= "delay_access 1 allow throttle_exts\n"; $conf .= "delay_access 1 deny all\n"; } else $conf .= "delay_access 1 allow all\n"; return $conf; } function squid_resync_auth() { global $config, $valid_acls; $settings = $config['installedpackages']['squidauth']['config'][0]; $settingsnac = $config['installedpackages']['squidnac']['config'][0]; $settingsconfig = $config['installedpackages']['squid']['config'][0]; $conf = ''; // Deny the banned guys before allowing the good guys if(! empty($settingsnac['banned_hosts'])) { if (squid_is_valid_acl('banned_hosts')) { $conf .= "# These hosts are banned\n"; $conf .= "http_access deny banned_hosts\n"; } } if(! empty($settingsnac['banned_macs'])) { if (squid_is_valid_acl('banned_macs')) { $conf .= "# These macs are banned\n"; $conf .= "http_access deny banned_macs\n"; } } // Unrestricted hosts take precendence over blacklist if(! empty($settingsnac['unrestricted_hosts'])) { if (squid_is_valid_acl('unrestricted_hosts')) { $conf .= "# These hosts do not have any restrictions\n"; $conf .= "http_access allow unrestricted_hosts\n"; } } if(! empty($settingsnac['unrestricted_macs'])) { if (squid_is_valid_acl('unrestricted_macs')) { $conf .= "# These hosts do not have any restrictions\n"; $conf .= "http_access allow unrestricted_macs\n"; } } // Whitelist and blacklist also take precendence over other allow rules if(! empty($settingsnac['whitelist'])) { if (squid_is_valid_acl('whitelist')) { $conf .= "# Always allow access to whitelist domains\n"; $conf .= "http_access allow whitelist\n"; } } if(! empty($settingsnac['blacklist'])) { if (squid_is_valid_acl('blacklist')) { $conf .= "# Block access to blacklist domains\n"; $conf .= "http_access deny blacklist\n"; } } $transparent_proxy = ($settingsconfig['transparent_proxy'] == 'on'); $auth_method = (($settings['auth_method'] && !$transparent_proxy) ? $settings['auth_method'] : 'none'); // Allow the remaining ACLs if no authentication is set if ($auth_method == 'none') { if ($settingsconfig['allow_interface'] == 'on') { $conf .= "# Allow local network(s) on interface(s)\n"; $allowed = array('localnet', 'allowed_subnets'); $allowed = array_filter($allowed, 'squid_is_valid_acl'); foreach ($allowed as $acl) $conf .= "http_access allow $acl\n"; } } else { $noauth = implode(' ', explode("\n", base64_decode($settings['no_auth_hosts']))); if (!empty($noauth)) { $conf .= "acl noauth src $noauth\n"; $valid_acls[] = 'noauth'; } // Set up the external authentication programs $auth_ttl = ($settings['auth_ttl'] ? $settings['auth_ttl'] : 60); $processes = ($settings['auth_processes'] ? $settings['auth_processes'] : 5); $prompt = ($settings['auth_prompt'] ? $settings['auth_prompt'] : 'Please enter your credentials to access the proxy'); switch ($auth_method) { case 'local': $conf .= 'auth_param basic program /usr/local/libexec/squid/ncsa_auth ' . SQUID_PASSWD . "\n"; break; case 'ldap': $port = (isset($settings['auth_port']) ? ":{$settings['auth_port']}" : ''); $password = (isset($settings['ldap_pass']) ? "-w {$settings['ldap_pass']}" : ''); $conf .= "auth_param basic program /usr/local/libexec/squid/squid_ldap_auth -b {$settings['ldap_basedomain']} -D {$settings['ldap_user']} $password -f \"(&(objectClass=person)(cn=%s))\" -u cn -P {$settings['auth_server']}$port\n"; break; case 'radius': $port = (isset($settings['auth_port']) ? "-p {$settings['auth_server_port']}" : ''); $conf .= "auth_param basic program /usr/local/libexec/squid/squid_radius_auth -w {$settings['radius_secret']} -h {$settings['auth_server']} $port\n"; break; case 'msnt': $conf .= "auth_param basic program /usr/local/libexec/squid/msnt_auth\n"; break; } $conf .= <<<eod<br>auth_param basic children $processes auth_param basic realm $prompt auth_param basic credentialsttl $auth_ttl minutes acl password proxy_auth REQUIRED EOD; // Onto the ACLs $password = array('localnet', 'allowed_subnets'); $passwordless = array('unrestricted_hosts'); if ($settings['unrestricted_auth'] == 'on') { // Even the unrestricted hosts should authenticate $password = array_merge($password, $passwordless); $passwordless = array(); } $passwordless[] = 'noauth'; $password = array_filter($password, 'squid_is_valid_acl'); $passwordless = array_filter($passwordless, 'squid_is_valid_acl'); // Allow the ACLs that don't need to authenticate foreach ($passwordless as $acl) $conf .= "http_access allow $acl\n"; // Allow the other ACLs as long as they authenticate foreach ($password as $acl) $conf .= "http_access allow password $acl\n"; } $conf .= "# Default block all to be sure\n"; $conf .= "http_access deny all\n"; return $conf; } function squid_resync_users() { global $config; $users = $config['installedpackages']['squidusers']['config']; $contents = ''; if (is_array($users)) { foreach ($users as $user) $contents .= $user['username'] . ':' . crypt($user['password'], base64_encode($user['password'])) . "\n"; } file_put_contents(SQUID_PASSWD, $contents); chown(SQUID_PASSWD, 'proxy'); chmod(SQUID_PASSWD, 0600); } function squid_resync() { global $config; $conf = squid_resync_general() . "\n"; $conf .= squid_resync_cache() . "\n"; $conf .= squid_resync_redirector() . "\n"; $conf .= squid_resync_upstream() . "\n"; $conf .= squid_resync_nac() . "\n"; $conf .= squid_resync_traffic() . "\n"; $conf .= squid_resync_auth(); squid_resync_users(); /* make sure pinger is executable */ exec("chmod a+x /usr/local/libexec/squid/pinger"); file_put_contents(SQUID_CONFBASE . '/squid.conf', $conf); $log_dir = $config['installedpackages']['squid']['config'][0]['log_dir'].'/'; if(!is_dir($log_dir)) { log_error("Creating squid log dir $log_dir"); make_dirs($log_dir); squid_chown_recursive($log_dir, 'proxy', 'proxy'); } squid_dash_z(); if (!is_service_running('squid')) { log_error("Starting Squid"); mwexec_bg("/usr/local/sbin/squid -D"); } else { log_error("Reloading Squid for configuration sync"); mwexec("/usr/local/sbin/squid -k reconfigure"); } filter_configure(); } function squid_print_javascript_auth() { global $config; $transparent_proxy = ($config['installedpackages']['squid']['config'][0]['transparent_proxy'] == 'on'); // No authentication for transparent proxy if ($transparent_proxy) { $javascript = << <eod<br>EOD; } else { $javascript = << <eod<br>EOD; } print($javascript); } function squid_print_javascript_auth2() { print("\n"); } function squid_generate_rules($type) { global $config; $squid_conf = $config['installedpackages']['squid']['config'][0]; if (!is_service_running('squid')) { log_error("SQUID is installed but not started. Not installing redirect rules."); return; } if (($squid_conf['transparent_proxy'] != 'on') || ($squid_conf['allow_interface'] != 'on')) { return; } $ifaces = explode(",", $squid_conf['active_interface']); $ifaces = array_map('convert_friendly_interface_to_real_interface_name', $ifaces); $port = ($squid_conf['proxy_port'] ? $squid_conf['proxy_port'] : 3128); switch($type) { case 'nat': foreach ($ifaces as $iface) $rules .= "# Setup Squid proxy redirect\n"; $rules .= "rdr on $iface proto tcp from any to !($iface) port 80 -> 127.0.0.1 port 80\n"; $rules .= "\n"; break; case 'filter': foreach ($ifaces as $iface) $rules .= "# Setup squid pass rules for proxy\n"; $rules .= "pass in quick on $iface proto tcp from any to !($iface) port 80 flags S/SA keep state\n"; $rules .= "pass in quick on $iface proto tcp from any to !($iface) port $port flags S/SA keep state\n"; $rules .= "\n"; break; default: break; } return $rules; } ?></eod<br></eod<br></eod<br></eod<br></eod<br></eod<br></eod<br></eod<br></eod<br></eod<br></eod<br>and
squid.xml
<packagegui><name>squid</name> <version>2.6.5_1-p15</version> <include_file>/usr/local/pkg/squid.inc</include_file> <additional_files_needed>http://www.pfsense.org/packages/config/squid/squid.inc</additional_files_needed> <additional_files_needed>http://www.pfsense.org/packages/config/squid/squid_cache.xml</additional_files_needed> <additional_files_needed>http://www.pfsense.org/packages/config/squid/squid_nac.xml</additional_files_needed> <additional_files_needed>http://www.pfsense.org/packages/config/squid/squid_ng.xml</additional_files_needed> <additional_files_needed>http://www.pfsense.org/packages/config/squid/squid_traffic.xml</additional_files_needed> <additional_files_needed>http://www.pfsense.org/packages/config/squid/squid_upstream.xml</additional_files_needed> <additional_files_needed>http://www.pfsense.org/packages/config/squid/squid_auth.xml</additional_files_needed> <additional_files_needed>http://www.pfsense.org/packages/config/squid/squid_users.xml</additional_files_needed> <additional_files_needed>http://www.pfsense.org/packages/config/squid/proxy_monitor.sh <prefix>/usr/local/etc/rc.d/</prefix> <chmod>0755</chmod></additional_files_needed> <menu> <name>Proxy server</name> <tooltiptext>Modify the proxy server's settings</tooltiptext> Services <url>/pkg_edit.php?xml=squid.xml&id=0</url> </menu> <service><name>squid</name> <description>Proxy server Service</description> <rcfile>squid.sh</rcfile> <executable>squid</executable></service> <title>Proxy server: General settings</title> <tabs><tab><text>General settings</text> <url>/pkg_edit.php?xml=squid.xml&id=0</url> <active></active></tab> <tab><text>Upstream proxy</text> <url>/pkg_edit.php?xml=squid_upstream.xml&id=0</url></tab> <tab><text>Cache management</text> <url>/pkg_edit.php?xml=squid_cache.xml&id=0</url></tab> <tab><text>Access control</text> <url>/pkg_edit.php?xml=squid_nac.xml&id=0</url></tab> <tab><text>Traffic management</text> <url>/pkg_edit.php?xml=squid_traffic.xml&id=0</url></tab> <tab><text>Auth settings</text> <url>/pkg_edit.php?xml=squid_auth.xml&id=0</url></tab> <tab><text>Local users</text> <url>/pkg.php?xml=squid_users.xml</url></tab></tabs> <fields><field><fieldname>active_interface</fieldname> <fielddescr>Proxy interface</fielddescr> <description>The interface(s) the proxy server will bind to.</description> <default_value>lan</default_value> <required><type>interfaces_selection</type></required></field> <field><fieldname>allow_interface</fieldname> <fielddescr>Allow users on interface</fielddescr> <description>If this field is checked, the users connected to the interface selected in the 'Proxy interface' field will be allowed to use the proxy, i.e., there will be no need to add the interface's subnet to the list of allowed subnets. This is just a shortcut.</description> <default_value>on</default_value> <required><type>checkbox</type></required></field> <field><fieldname>transparent_proxy</fieldname> <fielddescr>Transparent proxy</fielddescr> <description>If transparent mode is enabled, all requests for destination port 80 will be forwarded to the proxy server without any additional configuration necessary.</description> <required><type>checkbox</type></required></field> <field><fieldname>log_enabled</fieldname> <fielddescr>Enabled logging</fielddescr> <description>This will enable the access log. Don't switch this on if you don't have much disk space left.</description> <enablefields>log_query_terms,log_user_agents</enablefields> <type>checkbox</type></field> <field><fieldname>log_dir</fieldname> <fielddescr>Log store directory</fielddescr> <description>The directory where the log will be stored (note: do not end with a / mark)</description> <required><type>input</type> <size>60</size> <default_value>/var/squid/log</default_value></required></field> <field><fieldname>proxy_port</fieldname> <fielddescr>Proxy port</fielddescr> <description>This is the port the proxy server will listen on.</description> <required><type>input</type> <size>5</size> <default_value>3128</default_value></required></field> <field><fieldname>icp_port</fieldname> <fielddescr>ICP port</fielddescr> <description>This is the port the Proxy Server will send and receive ICP queries to and from neighbor caches. Leave this blank if you don't want the proxy server to communicate with neighbor caches through ICP.</description> <type>input</type> <size>5</size></field> <field><fieldname>visible_hostname</fieldname> <fielddescr>Visible hostname</fielddescr> <description>This is the URL to be displayed in proxy server error messages.</description> <default_value>localhost</default_value> <type>input</type> <size>60</size></field> <field><fieldname>admin_email</fieldname> <fielddescr>Administrator email</fielddescr> <description>This is the email address displayed in error messages to the users.</description> <default_value>admin@localhost</default_value> <type>input</type> <size>60</size></field> <field><fielddescr>Language</fielddescr> <fieldname>error_language</fieldname> <description>Select the language in which the proxy server will display error messages to users.</description> <default_value>English</default_value> <type>select</type></field> <field><fielddescr>Hide originating client address</fielddescr> <fieldname>forwarded_for</fieldname> <description>Enable this option and the proxy server will hide your internal IP from the internet. If not set, Squid will include your system's IP address or name in the HTTP requests it forwards. By default it looks like this: X-Forwarded-For: X.X.X.X. If you enable this, it will appear as X-Forwarded-For: unknown</description> <required><type>checkbox</type></required></field></fields> <custom_add_php_command>squid_resync();</custom_add_php_command> <custom_php_command_before_form>squid_before_form_general(&$pkg);</custom_php_command_before_form> <custom_php_validation_command>squid_validate_general($_POST, &$input_errors);</custom_php_validation_command> <custom_php_resync_config_command>squid_resync(); exec("/bin/rm -f /usr/local/etc/rc.d/squid");</custom_php_resync_config_command> <custom_php_install_command>update_status("Checking Squid cache... One moment please..."); update_output_window("This operation may take quite some time, please be patient. Do not press stop or attempt to navigate away from this page during this process."); squid_install_command(); squid_resync(); exec("/bin/rm -f /usr/local/etc/rc.d/squid");</custom_php_install_command> <custom_php_deinstall_command>squid_deinstall_command(); exec("/bin/rm -f /usr/local/etc/rc.d/squid*");</custom_php_deinstall_command></packagegui>Many Thanks to trendchiller! 8)
Greetins,
xabbu
-
What version squidGuard worked with current squid version?
-
Since squidGuard hasn't been in development for a number of years, the latest version in the FreeBSD ports tree should be perfectly adequate. I've used it before (not on pfSense) with the squid26 port.
-
I have pfSense 1.0.1 and latest official squid package (squid-2.6.5) from this topic
When i test self sG package gui with this on local pkg_config.xml (xmlrpc):
```
<depends_on_package_base_url>http://ftp13.freebsd.org/pub/FreeBSD/ports/i386/packages-6-stable/All</depends_on_package_base_url>
<depends_on_package>squidGuard-1.2.0_1.tbz</depends_on_package>this download previous version squid-2.5.14_2.tbz and install them ??? In **pkg_info** i looking both versions of **sqiud** What i must do for use squidGuard whith installed newest version squid (not download previous version)? ps: i only make webGUI for squidGuard for existing hidden in pkg_config.xml _squidGuard package_ -
Error in /usr/local/pkg/squid.inc, line #639
'max_download_suze' must be changed on 'max_download_size'
-
Fixed, thanks!
-
Question-request
Possible add to squid package log-rotation?
For instance in the manner of list (element-select)
-never
-daily
-weekly
-monthly -
Question-request
Possible add to squid package log-rotation?
For instance in the manner of list (element-select)
-never
-daily
-weekly
-monthlyPatches accepted.
-
just installed squid and find it to be quite nice. The interface is completely different from what I expected. Not as powerful as I would like it to be. Probably cause I am used to webmin.
Anyway, some of the features I needed are not in the gui. Can I port over my own squid.conf and apply it there? I understand I won't be able to edit the squid.conf later using the gui. I am okay with that as I can edit the file manually. Will that work?
-
Yes You can edit squid.conf manually But don't run gui after - conf will rewrited
-
If you want to write your own conf files, just edit the squid.sh file in /usr/local/etc/rc.d/squid.sh
Add the startup flag to point to the squid.conf that you write yourself.
The webgui won't work for changes anymore, but you won't get your conf file rewritten every time the box restarts either.
Also, webmin runs on a pfsense machine
pkg_add -r webmin
run setup.pl instead .sh
Boom, you have webmin.
Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.