Keep loosing WAN IP Address - dhclient does not seem to do update

Selective · Feb 19, 2007, 6:54 AM

i did a workaround for that problem a couple of months ago:

rc.newwanip:
–---------------------------
if($curwanip == "0.0.0.0") {
log_error("Failed to update WAN IP, restarting dhclient.");
exec("dhclient {$interface_real}");
/* die now, dhclient will kick off rc.newwanip again? */
exit;
}

freax · Feb 19, 2007, 10:00 AM

Is not the real deal but if you disconnect the cable and connect it again you won't have link.
I have both ends with fixed ip (the router and firewall interface) and it should have link again like it should.

Like I said, i think it's a good way to debug whenever you want. Tests always available.

Sorry if i'm wrong.

Krakke · Feb 19, 2007, 1:45 PM

Tried this "fetch -o /etc/inc http://www.pfsense.com/~sullrich/filter.inc"

Now i have to reinstall pfsense :'(

sullrich · Feb 20, 2007, 4:46 AM

I have added a workaround and verified that it does indeed seem to work.

Update to the latest snapshot at least an hour from now. Currently 11:46PM EST.

Selective · Feb 20, 2007, 10:44 PM

im sorry to say this but, the new snapshot (02-18) is not working :(
–------------------------------

Feb 20 23:40:20 php: : rc.newwanip working with IP address 0.0.0.0 wan rl0.
Feb 20 23:40:20 php: : Informational: rc.newwanip is starting rl0.
Feb 20 23:40:19 dhclient: exit_with_hooks()
Feb 20 23:40:19 dhclient: PREINIT
Feb 20 23:40:19 dhclient: netstat
Feb 20 23:40:19 dhclient[21934]: DHCPOFFER from 90.224.168.1
Feb 20 23:40:19 dhclient[21934]: DHCPDISCOVER on rl0 to 255.255.255.255 port 67 interval 8
Feb 20 23:40:19 dhclient: exit_with_hooks()
Feb 20 23:40:19 check_reload_status: rc.newwanip starting
Feb 20 23:40:19 dhclient: PREINIT
Feb 20 23:40:19 dhclient: netstat
Feb 20 23:40:19 dhclient: exit_with_hooks()
Feb 20 23:40:18 dhclient: Deleting old routes
Feb 20 23:40:18 dhclient: EXPIRE FAIL
Feb 20 23:40:18 dhclient: netstat
Feb 20 23:40:18 dhclient: exit_with_hooks()
Feb 20 23:40:18 dhclient: PREINIT
Feb 20 23:40:18 dhclient: netstat
Feb 20 23:18:20 dhclient[280]: exiting.
Feb 20 23:18:20 dhclient[280]: exiting.
Feb 20 23:18:20 dhclient[280]: short write: wanted 21 got 0 bytes
Feb 20 23:18:20 dhclient[280]: short write: wanted 21 got 0 bytes
Feb 20 23:18:20 dhclient[280]: DHCPACK from 90.224.168.1
Feb 20 23:18:20 dhclient[280]: DHCPREQUEST on rl0 to 255.255.255.255 port 67
Feb 20 23:16:07 last message repeated 6 times
Feb 20 23:12:37 last message repeated 7 times
Feb 20 23:10:43 last message repeated 4 times
Feb 20 23:10:13 dhclient[280]: DHCPREQUEST on rl0 to 213.67.15.234 port 67
Feb 20 23:00:37 php: : FTP proxy disabled for interface opt2 - ignoring.
Feb 20 23:00:37 php: : FTP proxy disabled for interface opt1 - ignoring.
Feb 20 23:00:37 php: : FTP proxy disabled for interface LAN - ignoring.
Feb 20 23:00:36 check_reload_status: reloading filter
Feb 20 23:00:30 check_reload_status: updating dyndns
Feb 20 23:00:27 php: : FTP proxy disabled for interface opt2 - ignoring.
Feb 20 23:00:27 php: : FTP proxy disabled for interface opt1 - ignoring.
Feb 20 23:00:27 php: : FTP proxy disabled for interface LAN - ignoring.
Feb 20 23:00:23 check_reload_status: reloading filter
Feb 20 23:00:23 php: : Configuring slbd
Feb 20 23:00:23 php: : Resyncing configuration for all packages.
Feb 20 23:00:19 php: : Creating rrd update script

sullrich · Feb 21, 2007, 1:03 AM

I really don't see how it could not work.

Run this from a shell:

cat /sbin/dhclient | grep reload

What does the results say?

Selective · Feb 21, 2007, 7:04 AM

it does not say anything:
–----------------------------

Enter an option: 8

cat /sbin/dhclient | grep reload

Binary file (standard input) matches

sullrich · Feb 21, 2007, 6:14 PM

Can someone else please test? This absolutely works for me after 20 hours when normally it would break in 30 minutes…

Krakke · Feb 21, 2007, 7:05 PM

@sullrich:

Can someone else please test? This absolutely works for me after 20 hours when normally it would break in 30 minutes…

Works fine for me, only lost my ip 2 times, and that was before the latest snapshot.

sullrich · Feb 21, 2007, 7:11 PM

@Krakke:

Works fine for me, only lost my ip 2 times, and that was before the latest snapshot.

Great! Almost started to go insane, because I know this fixed my issue. Please, someone else test?

Krakke · Feb 21, 2007, 8:12 PM

@sullrich:

@Krakke:

Works fine for me, only lost my ip 2 times, and that was before the latest snapshot.

Great! Almost started to go insane, because I know this fixed my issue. Please, someone else test?

Im sorry sullrich, went out for a while, when i came back

Feb 21 20:01:24 dhclient[300]: DHCPREQUEST on fxp0 to 172.21.249.50 port 67
Feb 21 20:01:24 dhclient[300]: DHCPACK from 172.21.249.50
Feb 21 20:01:24 dhclient[300]: short write: wanted 21 got 0 bytes
Feb 21 20:01:24 dhclient[300]: short write: wanted 21 got 0 bytes
Feb 21 20:01:24 dhclient[300]: exiting.
Feb 21 20:01:24 dhclient[300]: exiting.

hoba · Feb 21, 2007, 8:46 PM

Atm there is a workaround in pllace that will restart the dhclient when it exits. Does it get restarted?

Krakke · Feb 21, 2007, 8:55 PM

@hoba:

Atm there is a workaround in pllace that will restart the dhclient when it exits. Does it get restarted?

Nope at 20:01:24 it exited, at 21:01 i lost my ip, then i had to do a renew.

sullrich · Feb 21, 2007, 10:31 PM

It can take up to 5 minutes to restart dhclient depending on if check_reload_status is running.

So if you still have trouble please check that check_reload_status is running from a shell by doing:

ps awux | grep check_reload_status

Also, cat /etc/crontab | grep check

sullrich · Feb 21, 2007, 11:01 PM

I found yet another problem. This WAN DHCP issue has been nothing but fun!

Try out a recent snapshot atleast an hour from now.

Selective · Feb 22, 2007, 7:18 PM

damn! snapshot 02-21 is not working :'( :'( :'(
–----------------

Feb 22 20:02:39 dhclient[283]: exiting.
Feb 22 20:02:39 dhclient[283]: exiting.
Feb 22 20:02:39 dhclient[283]: short write: wanted 21 got 0 bytes
Feb 22 20:02:39 dhclient[283]: short write: wanted 21 got 0 bytes
Feb 22 20:02:39 dhclient[283]: DHCPACK from 90.224.168.1
Feb 22 20:02:39 dhclient[283]: DHCPREQUEST on rl0 to 255.255.255.255 port 67
Feb 22 19:59:46 last message repeated 5 times
Feb 22 19:56:08 last message repeated 6 times
Feb 22 19:54:11 last message repeated 4 times
Feb 22 19:53:39 dhclient[283]: DHCPREQUEST on rl0 to 213.67.15.234 port 67
Feb 22 19:44:03 php: : FTP proxy disabled for interface opt2 - ignoring.
Feb 22 19:44:03 php: : FTP proxy disabled for interface opt1 - ignoring.
Feb 22 19:44:03 php: : FTP proxy disabled for interface LAN - ignoring.
Feb 22 19:44:02 check_reload_status: reloading filter

sullrich · Feb 22, 2007, 9:03 PM

@Selective:

damn! snapshot 02-21 is not working :'( :'( :'(

Yes the problem still exists and we have been racking our brains out – literally.

sullrich · Feb 23, 2007, 8:39 PM

Please try http://snapshots.pfsense.com/FreeBSD6/RELENG_1/updates/pfSense-Full-Update-1.0.1-SNAPSHOT-02-21-2007.tgz

Selective · Feb 24, 2007, 10:03 AM

Sorry, not working either (snap 02-21)

–----------------------

Feb 24 05:03:45 dhclient[282]: exiting.
Feb 24 05:03:45 dhclient[282]: exiting.
Feb 24 05:03:45 dhclient[282]: short write: wanted 21 got 0 bytes
Feb 24 05:03:45 dhclient[282]: short write: wanted 21 got 0 bytes
Feb 24 05:03:45 dhclient[282]: DHCPACK from 90.224.168.1
Feb 24 05:03:45 dhclient[282]: DHCPREQUEST on rl0 to 255.255.255.255 port 67
Feb 24 05:02:41 last message repeated 4 times
Feb 24 04:58:09 last message repeated 3 times
Feb 24 04:56:02 last message repeated 3 times
Feb 24 04:55:34 dhclient[282]: DHCPREQUEST on rl0 to 213.67.15.234 port 67
Feb 24 04:45:58 php: : FTP proxy disabled for interface opt2 - ignoring.
Feb 24 04:45:58 php: : FTP proxy disabled for interface opt1 - ignoring.
Feb 24 04:45:58 php: : FTP proxy disabled for interface LAN - ignoring.
Feb 24 04:45:56 check_reload_status: reloading filter

sullrich · Feb 24, 2007, 6:47 PM

At this point reinstall. My dhclient has been rock solid for over 24 hours!

Keep loosing WAN IP Address - dhclient does not seem to do update

rc.newwanip: –--------------------------- if($curwanip == "0.0.0.0") { log_error("Failed to update WAN IP, restarting dhclient."); exec("dhclient {$interface_real}"); /* die now, dhclient will kick off rc.newwanip again? */ exit; }

cat /sbin/dhclient | grep reload

cat /sbin/dhclient | grep reload

rc.newwanip:
–---------------------------
if($curwanip == "0.0.0.0") {
log_error("Failed to update WAN IP, restarting dhclient.");
exec("dhclient {$interface_real}");
/* die now, dhclient will kick off rc.newwanip again? */
exit;
}