PfSense Newb here, please help
-
here's my setup
70.90.xx.xx /29(wan 1)–-----+
|--(pfSense)---Lan
70.90.xx.xx /29(wan2/opt1)---+now we have wan 1 with 5 usable ip's
i''m assigning one of my available ip's on wan1 to forward to my ssh server at
70.90.xx.123/32 -> 192.168.0.5i've set this up to 1:1 nat and have the firewall rules to pass traffic
but when i try to access the box i get nothing..any ideas as to why this is not working? using the latest 1.0.1
-
I would recommend as a starting point to try tcpdump on both WAN and LAN interface.
See if there are- Packets coming to the WAN IF on port 22(or whatever port you use on the WAN IF for SSH).
- Packets being routed out on the LAN IF to port 22 and correct internal IP address.
I would try from a secure shell or local console tcpdump -i ifname -n port 22 on the WAN IF
and then later(or running two shells at the same time) the same, tcpdump -i ifname -n port 22.You can get the ifname of the WAN, OPT1 and LAN from the web gui Diagnostics/Interfaces, they
are written next to the WAN, LAN and OPT1 text.That will at least tell you if packets are being transmitted somewhere in to your internal network.
-
You need to make sure you created the appropriate Virtual IPs. Also you will need Firewall rules to allow the traffic.