I can’t start squid without problems under pfSense 1.0.1
-
Upgrade to a recent snapshot.
-
I installed from the iso image (http://snapshots.pfsense.com/FreeBSD6/RELENG_1/iso/pfSense.iso.gz):
1.0.1-SNAPSHOT-03-15-2007
(built on Mon Mar 19 15:39:33 EDT 2007)…..no difference with last:
1.0.1-SNAPSHOT-03-15-2007
(built on Sat Mar 17 10:47:32 EDT 2007) -
I discovered that the message “You can not run squid on the same port as the webgui” appears during the configuration using HTTPS as webGUI protocol only.
-
move the gui to a diferent port
like 10000 -
Hello,
I have the same situation with:
1)I installed new clear pfSense 1.0.1 and squid 2.6.5_1-p15 packages.
It seems that squid works, but during reboot pfSense stops at the line:
"Stopping /usr/ local/etc/rc.d/proxy_monitor.sh…"The webgui port is 10000.
-
Squid requires a recent snapshot. Search the forum.
-
Same problems with 1.0.1-SNAPSHOT-03-27-2007
-
Sorry but I am not seeing this problem on the latest snapshot. Maybe a reinstall is in order.
-
I had a similar problem with a latest snapshot (13 april 2007). I found a error in a squid.log: /var/squid/cache/swap.state: (13) Permission denied. Squid not started and proxy_monitor.sh tries to start it again and again. After chmod /var/squid/cache/swap.state all working fine.
-
Hello, I had this problem too.
Using snapshot http://snapshots.pfsense.com/FreeBSD6/RELENG_1/updates/pfSense-Full-Update-1.0.1-SNAPSHOT-03-27-2007.tgz
-
Should be fixed now. Thanks.