Cannot select WAN interface in load balancer list
-
Hello there!
I have a strange problem when I follow the Multi-WAN/Load-Balancing documentation: I cannot add the WAN interface, it's nit in the list.
I have 6 interfaces: LAN (172.16.0.200 atm), WAN (192.168.104.1), WAN2 (192.168.105.1), VPN (192.168.100.1), DMZ (192.168.103.1) and PROXY (192.168.102.1).
I want to set up the following:
WAN and WAN2 shall be load balanced
WAN, WAN2, VPN shall be fail overed (for some purpose)
WAN2, WAN, VPN shall be fail overed (for another purpose)I set all interfaces to use a static address and defined the gateways for the WAN, WAN2 and VPN interfaces.
Now, when I try to set up the first pool (Load Balancing), the WAN Interface is not in the Interface Name Listbox, only the WAN2 and the VPN interfaces are shown there.
I use 1.2-Beta1.
How do I get the WAN interface in the listbox?
-
using 1.2-BETA-1-TESTING-SNAPSHOT-04-30-07
"Interface Name" works fine here.
-
It only offers Interfaces that have a gateway configured. I guess your WAN Interface is down and has no IP-Configuration and that's why it is not shown in the list. Get some connectivity at WAN and try to create the pool again.