Small footprint box
-
The question is always "good for what". You can't say that in general. I don't see any cpu (celeron, pentium-m, c3, c7,…) having problems with the specs that you mention unless you run from something with very low megahertz (like a wrap or a soekris).
-
:)
ok, lets put it this way. how far celeron/pentium m with 1gb memory and some intel nics can go as a strictly vpn appliance?
for example, netgear tells me that ixp425/32mb ram will run 200 tunnels with 60 mbps 3des throughput, or linksys on samsung arm/have_no_idea_how_much_memory device befvp41 will run 50 tunnels with 700kbps. -
We have decent test environments thanks to the vendors on our recommended vendors page, but we don't have the huge resources that Netgear has for setting up a test environment to simulate 200 tunnels and 60 Mb throughput, etc.
My educated guess would be 500 MHz with 256 MB RAM will handle 50-100 IPsec tunnels and your 4/1.5 Mb Internet connection with no problem. Bandwidth would be the primary concern for hardware sizing, and 4/1.5 is so little that pretty much any CPU over 300-400 MHz should be fine, just a matter of having enough RAM for that many tunnels and even 128 MB may be adequate for that.
-
well… as some girls say "size doesn't matter" ;D
even with it's huge resourses netgear can't come up with a decent firmware for it's business-class router and yours is working right out of the box. -
i've found what i was looking for! :)
http://www.portwell.com/products/detail.asp?CUSTCHAR1=NAD-2081
but i has marvell nics on board and i can't find them in the list of supported hardware. are they not supported at all?
and also is cavium supported by pfsense? -
It looks like the sk driver has supported that chip since FreeBSD 5.3, so pfSense should be fine. That said, the official FreeBSD documentation doesn't reflect this, just some CVS logs and mailing list postings…
-
i tried to google "marvell 88e8001 pfsense" and all posts there say that it's not working. can't find anything about freebsd.
-
dear experts…
between these two boxes
http://advantech.com/products/Model_Detail.asp?model_id=1-23A32I&BU=NCG&PD=http://portwell.com/products/detail.asp?CUSTCHAR1=NAD-2081
which one would you pick...
-
I believe that Marvell chipset is the same one Scott has in one of his firewalls at work and hasn't had good luck with. The other box doesn't even list what NIC chipset is used at all, that I see.
Given that, my answer would be "neither", unless you can figure out what NIC chipset that other one uses.
-
_One 10/100 Intel 82562 FE port for management
Gigabit Ethernet Four 10/100/1000 Mbps GbE portsFWA-700 GbE Controller 4 x Marvell 8053_
or
_FWA-710 4 x Intel 82573
LAN Bypass Two segment on GbE ports_
-
I think your best bet of those would be the FWA-710. Intel GB NICs FTW.
-
Did you end up buying the FWA-710? Looks interesting. Did you get pricing on the unit? Would be interested to know.
Thanks
-
no… couldn't get through to sales rep there so i got myself nad-2081 http://portwell.com/products/detail.asp?CUSTCHAR1=NAD-2081
nice unit. even though cmb was warning me about marvell chips it works fine. all 4 interfaces were recognized right out of the box. -
covex: Interesting, keep us posted on how that box works out for you.
-
ok… i installed this box in my office. using only 2 ports (lan and wan) out of 4 (sk0 sk1 sk2 sk3) at the moment. first test (transfer 40MB file inside vpn from remote site) gives me 4mbps (turbo dsl). if you wanna see something else, let me know what to run.
for dmesg please see the attachment. -
looks like these marvell chips are not as bad as people saying :)
even though i found on the net tons of complains about them under *nix and windows mine are working Ok and also i got intel box here running as dc and it has marvell giga chip in there too. so i guess it's not the chip that bad it's just bad implementation of it done by asus and co. -
new update… :)
got wistron cm9 installed in the box. works greate! now my gateway/vpn server aslo acting as an ap.
this pfsense is a realy greate pease of software! -
Any idea on price?
-
i paid ~$1100 for p4 2.8gzh, 512mb, 40gb hdd.
-
First I want to apology for offtopic, but I jusg got curios.
it's just bad implementation of it done by asus and co.
What you mean with that?
I have ASUS MB, with marvell giga LAN chip(I buy that in about 3years ago). I used it wit many different OS's and did not got a single mistake from it, even now I'm using that MB.
Never test it with PfSense, but with FreeBSD it OK, it must be the same situation in PfSense.
