IMSpector on PFSense 1.0.2 BETA

[sloan]

I upgraded to 1.0.2 BETA 1 and tried to get IMS running.  The daemon is running.  But logging is not taking place.

ps -ax | grep imspector
10991  ??  Is    0:00.02 /usr/local/sbin/imspector -c /usr/local/etc/imspector/imspector.conf
10992  ??  I      0:00.00 /usr/local/sbin/imspector -c /usr/local/etc/imspector/imspector.conf
10993  ??  I      0:00.01 /usr/local/sbin/imspector -c /usr/local/etc/imspector/imspector.conf
11116  ??  S      0:00.05 /usr/local/sbin/imspector -c /usr/local/etc/imspector/imspector.conf
13351  ??  I      0:00.02 /usr/local/sbin/imspector -c /usr/local/etc/imspector/imspector.conf

Every time I start imspector I restart my YAHOO client to test logging.

Do I need to manually uncomment the second line of the config file?
The line pertaining to the port it can run on?

Here is the config file

cat imspector.conf
plugin_dir=/usr/local/lib/imspector
msn_protocol=on
icq_protocol=on
yahoo_protocol=on
irc_protocol=on
file_logging_dir=/var/imspector
icq_trace_error=on

Thanks

[sloan]

Here is some additional information.  When I run the command
imspector -d -c "/usr/local/etc/imspector/imspector.conf"

I can see IMS is working fine.  It is just not logging.  I see a directory /var/imspector with nothing going to it.

pfctl -aimspector -sn
rdr pass on fxp0 inet proto tcp from any to any port = 1863 -> 127.0.0.1 port 16667
rdr pass on fxp0 inet proto tcp from any to any port = aol -> 127.0.0.1 port 16667
rdr pass on fxp0 inet proto tcp from any to any port = mmcc -> 127.0.0.1 port 16667
rdr pass on fxp0 inet proto tcp from any to any port = ircd -> 127.0.0.1 port 16667

****From another post I found and ran an update
fetch -o - http://wgnrs.dynalias.com:81/pfsense/imspector/sh-update-imspector.sh | sh -

running this last command got it working and logging**** ;D

[rsw686]

I'm on vacation through the end of the week so I only have limited access to the internet. When I get back I will look into this problem. Glad you got it working in the meantime.

[wlee618]

Hi,
  i have installed the imspector package with PFSense 1.01 and it doesn't seems to work…  by that i meant, i don't see any logging showing and i have done a couple of check/uncheck to restart... help~~~~ ???

[noo]

# fetch -o - http://wgnrs.dynalias.com:81/pfsense/imspector/sh-update-imspector.sh | sh -
fetch: http://wgnrs.dynalias.com:81/pfsense/imspector/sh-update-imspector.sh: Not Found

:'(

[rsw686]

The post you replied to is 5 months old. The reason the script is not found as those upgrades were packaged into IMSpector 0.3.1. You can update to this version via the Package Manager.

[rsw686]

@josempinto:

Hi,
  I have installed the imspector package with PFSense V.1.2 RC3 (and tested also on RC2) and it doesn't seems to work…  by that i meant, i don't see any logging showing and i have done a couple of check/uncheck to restart... help????

Please do not post the same question in multiple threads. If you had read this thread you would have seen how to run imspector in debug mode. Do this and see if the clients are connection and if the messages are being shown.