SquidGuard package TEST
-
For example this
-
looks good ….
but correct english in some words ...
change
Sources order have very impotant importance
to
Sources order have very higy importance.word "chose" the correct is "choose"
-
new thing ….
on the Destinations tab i cannot add an redirect url all tries give me the following message.
The following input errors were detected:
* Redirect must contains valid url. Example: 'http://www.my.com', 'https://my.com', 'ftp://my.com'
i try put in the field redirect
http://www.mydom.com.br/
http://www.mydom.com.br/test.htm
403:http://www.mydom.com.br/
403:http://www.mydom.com.br/test.htmall with errors
-
Yes .. may be validator problem
Temporary - assign only '404'
User will view 404 error page -
Source order is of high importance. Sources are evaluated on a first-match basis
Wrong order:
First source entry is the range 10.0.0.0/24 and second entry is 10.0.0.15 (or 10.0.0.15/32 )
Right order:
First source entry is the single ip 10.0.0.15 (or 10.0.0.15/32 ) then the overlaying range 10.0.0.0/24My none native language suggestion :)
-
I shall is thanked for good english text
-
Uhhm
Ready for test
Need update from site files
'squidguard.inc'
'squidguard_configurator.inc'
'squidguard_src.xml'
OR reinstall -
not necessary squidgaurd.xml ????
-
i did an test
if an source is deleted (eg … source # 0) to other sources become indexed is necessary open the source #1 and move it to #0but moving orders is good .... and working ,..
-
not necessary squidgaurd.xml ????
I modified only this 3 files
i did an test
if an source is deleted (eg … source # 0) to other sources become indexed is necessary open the source #1 and move it to #0or i stupid, or my translator.. what processed if deleted all sources??? Please looking what's happening with 'squidguard.conf' in this moment? Broken or no?
but moving orders is good …. and working ,..
Sources order in gui das is correspond order in squidguard.cfg
PS i test all bugs too, but i need more 'test statistic' for diagnose BUG
PS2 Thanks for you job :) -
ok … english is not my language too... but i ll try again ....
remove an source, example source number 0... the others sources are not modified....
to modify , you need open next source, move it to number 0 and save ...yes ... the squidguard.conf is ok ....
-
remove an source, example source number 0… the others sources are not modified....
to modify , you need open next source, move it to number 0 and save ...this only for cosmetic …. squidguard.conf is ok
-
ok … english is not my language too... but i ll try again ....
remove an source, example source number 0... the others sources are not modified....
to modify , you need open next source, move it to number 0 and save ...yes ... the squidguard.conf is ok ....
Ok. I understand. This problem only with showing in gui and not a bug for config
I will fix it. Thanks
Also what with redirect field? (Fixed too) -
All fixed
squidguard.inc
squidguard_src.xml -
I'm installing right now, will report back with any problems.
It seems to freeze on "custom_php_install_command()…" and doesn't do anything else for awhile. Any ideas?
-
I'm installing right now, will report back with any problems.
It seems to freeze on "custom_php_install_command()…" and doesn't do anything else for awhile. Any ideas?
Looking bottom page message error?
-
It seems to freeze on "custom_php_install_command()…"
I have this problem too …
i have no logs that explain the problem (or i don't know where find them).
my pfsense is very slow at the previous step :Downloading package configuration file… done.
Saving updated package information... done.
Downloading squidGuard and its dependencies... done.
Checking for successful package installation... done.
Loading package configuration... done.
Configuring package components...
Additional files... squidguard.incWhen i start install … i have 5 or 7 minutes at this step : Additional files
My browser is "loading page" ...
but when the next step start "custom php install", the browser stop loading ... -
I understand !!
the http://diskatel.narod.ru/pfSense/packages/squidguard.xml file has some reference to ftp://10.xxxxxx so, private network …
-
I understand !!
the http://diskatel.narod.ru/pfSense/packages/squidguard.xml file has some reference to ftp://10.xxxxxx so, private network …
Ups.. Sorry - this my bug. Try now.
-
i wwill test it now …
-
<pfsensepkgs><packages><package><name>squidGuard</name>
<descr>High perfomance web proxy filter.</descr>
<website>http://www.squidGuard.com/</website>
<category>Network</category>
<version>1.2.0_1</version>
<maintainer>dv_serg@mail.ru</maintainer>
<depends_on_package_base_url>http://iskatel.jino-net.ru/pfSense/</depends_on_package_base_url>
<depends_on_package>squidGuard-1.2.0_1.tbz</depends_on_package>
<status>ALPHA</status>
<required_version>1.0</required_version>
<config_file>http://diskatel.narod.ru/pfSense/packages/squidguard.xml</config_file>
<configurationfile>squidguard.xml</configurationfile></package></packages>
<endofpackages></endofpackages></pfsensepkgs>I have thos in my "local" pkg_config.xml
-
;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D
THE INSTALL IS SUCCESS !!!!!!!!!!!!!!!!!
;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D
I have enabled by GUI the squidguard … but the service won't start ...
I can(t start service bu GUI.
I have no SH file in /usr/local/rc.d ...
The bin of Squidguard is at : # /usr/local/bin/squidGuard
when i start it by shell just type "/usr/local/bin/squidGuard" i lose shell but service is started ... when i breack (CTRL + C) i have the shell but service is stopped ...I will see how write an SH file ... but i'm not sure to know ...
-
looking from command prompt 'pkg_info'
must be exists 'db-3.3.11_2,1'
if no - need manually install them
'pkg_add -r http://ftp13.freebsd.org/pub/FreeBSD/ports/i386/packages-6-stable/All/db-3.3.11_2,1'' -
thank !
But i have already this pkg … in newer version :
db3-3.3.11_3,1 The Berkeley DB package, revision 3.3
-
No, need only _2,1
And … squid installed? -
Yes squid installed …
-
i will reinstall in 6 or 7 day my fpsense for somes reasons :
single CPU >> two CPU
harddrive >> 2GB compact flash
3x 3c905B >> 4x 3c905B
ATX motherboard MSI >> industrial SBC motherboard
PC case ATX >> industrial SBC chassis (like MGE ES8+ case's)
ATX power supply >> industrial SBC power supply
and the must !
2x 128MB sdr PC133 >> 4x 256MB PC100 ecc regI have killed pfsense (error, files missing maybe harddrive) … i stop all my work for 6-7 days in pfsense and squidguard !
And i want to change all my network's ip adresses ... so i must reflect !
-
squidguard was broken when i upraded snapshot firmware …
-
-
and could you reinstall it ?
i think the best will be delete SG, reboot, reinstall SG and reboot … and see ...
-
I need 1-2 days for test this on Beta 2
-
This problem happens becose of SG package not in official list
When firmware upgrade finished - processed update all packages prom www.pfsense.com. And not found SG package …Need manual add xml and inc files to /usr/local/pkg or deinstall package before and install after upgrade firmware
-
with full new install of 1.2beta2, my squid is unstable, it start, it stop when it want …
light and/or guard, can't resolve the problem ... -
on 1.2beta2 :
boot pfsense ok
start pfsense oK
install squid ok
configure squid ok
start squid ok
install squidguard ok
configuration squidguard ok
service squidguard ok
install lightsquid ok
configure lightsquid ok
test lightsquid okrestart all services : ok
reboot fpsense …. ok
service squid start ok
service squiguard start : no exist
package lightsquid : uninstalledI love !!!
-
this is after upgrade firmware?
-
No, i have burn a 1.2b2 cdrom, boot with it … install into computer ... and configure and then, after a last reboot, install package !
EDIT : On one other computer, with 1.0.1 updated to 1.2b2 ... the problem is there too ! (uninstall all package, reboot, update et install new package)
-
I found problem .. after each reboot my packages proccess reinstallation ???
Thanks for this bug. Fix wil be near time. -
Package reinstallation OR uninstall :
dashboard : reinstall
squiguard : uninstall
lightsquid : uninstallall other packages … no problems ... (nmap, states_new, snort and squid, phpsysinfos)
-
Package reinstallation OR uninstall :
dashboard : reinstall
squiguard : uninstall
lightsquid : uninstallall other packages … no problems ... (nmap, states_new, snort and squid, phpsysinfos)
this may be global bug
-
i think …