SquidGuard package TEST
-
remove an source, example source number 0… the others sources are not modified....
to modify , you need open next source, move it to number 0 and save ...this only for cosmetic …. squidguard.conf is ok
-
ok … english is not my language too... but i ll try again ....
remove an source, example source number 0... the others sources are not modified....
to modify , you need open next source, move it to number 0 and save ...yes ... the squidguard.conf is ok ....
Ok. I understand. This problem only with showing in gui and not a bug for config
I will fix it. Thanks
Also what with redirect field? (Fixed too) -
All fixed
squidguard.inc
squidguard_src.xml -
I'm installing right now, will report back with any problems.
It seems to freeze on "custom_php_install_command()…" and doesn't do anything else for awhile. Any ideas?
-
I'm installing right now, will report back with any problems.
It seems to freeze on "custom_php_install_command()…" and doesn't do anything else for awhile. Any ideas?
Looking bottom page message error?
-
It seems to freeze on "custom_php_install_command()…"
I have this problem too …
i have no logs that explain the problem (or i don't know where find them).
my pfsense is very slow at the previous step :Downloading package configuration file… done.
Saving updated package information... done.
Downloading squidGuard and its dependencies... done.
Checking for successful package installation... done.
Loading package configuration... done.
Configuring package components...
Additional files... squidguard.incWhen i start install … i have 5 or 7 minutes at this step : Additional files
My browser is "loading page" ...
but when the next step start "custom php install", the browser stop loading ... -
I understand !!
the http://diskatel.narod.ru/pfSense/packages/squidguard.xml file has some reference to ftp://10.xxxxxx so, private network …
-
I understand !!
the http://diskatel.narod.ru/pfSense/packages/squidguard.xml file has some reference to ftp://10.xxxxxx so, private network …
Ups.. Sorry - this my bug. Try now.
-
i wwill test it now …
-
<pfsensepkgs><packages><package><name>squidGuard</name>
<descr>High perfomance web proxy filter.</descr>
<website>http://www.squidGuard.com/</website>
<category>Network</category>
<version>1.2.0_1</version>
<maintainer>dv_serg@mail.ru</maintainer>
<depends_on_package_base_url>http://iskatel.jino-net.ru/pfSense/</depends_on_package_base_url>
<depends_on_package>squidGuard-1.2.0_1.tbz</depends_on_package>
<status>ALPHA</status>
<required_version>1.0</required_version>
<config_file>http://diskatel.narod.ru/pfSense/packages/squidguard.xml</config_file>
<configurationfile>squidguard.xml</configurationfile></package></packages>
<endofpackages></endofpackages></pfsensepkgs>I have thos in my "local" pkg_config.xml
-
;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D
THE INSTALL IS SUCCESS !!!!!!!!!!!!!!!!!
;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D
I have enabled by GUI the squidguard … but the service won't start ...
I can(t start service bu GUI.
I have no SH file in /usr/local/rc.d ...
The bin of Squidguard is at : # /usr/local/bin/squidGuard
when i start it by shell just type "/usr/local/bin/squidGuard" i lose shell but service is started ... when i breack (CTRL + C) i have the shell but service is stopped ...I will see how write an SH file ... but i'm not sure to know ...
-
looking from command prompt 'pkg_info'
must be exists 'db-3.3.11_2,1'
if no - need manually install them
'pkg_add -r http://ftp13.freebsd.org/pub/FreeBSD/ports/i386/packages-6-stable/All/db-3.3.11_2,1'' -
thank !
But i have already this pkg … in newer version :
db3-3.3.11_3,1 The Berkeley DB package, revision 3.3
-
No, need only _2,1
And … squid installed? -
Yes squid installed …
-
i will reinstall in 6 or 7 day my fpsense for somes reasons :
single CPU >> two CPU
harddrive >> 2GB compact flash
3x 3c905B >> 4x 3c905B
ATX motherboard MSI >> industrial SBC motherboard
PC case ATX >> industrial SBC chassis (like MGE ES8+ case's)
ATX power supply >> industrial SBC power supply
and the must !
2x 128MB sdr PC133 >> 4x 256MB PC100 ecc regI have killed pfsense (error, files missing maybe harddrive) … i stop all my work for 6-7 days in pfsense and squidguard !
And i want to change all my network's ip adresses ... so i must reflect !
-
squidguard was broken when i upraded snapshot firmware …
-
-
and could you reinstall it ?
i think the best will be delete SG, reboot, reinstall SG and reboot … and see ...
-
I need 1-2 days for test this on Beta 2