Lightsquid package Test

dvserg

Reinstallation-update fix bug already found, but not updated. Near time will be fixed ::)

Include files in lightsquid.xml !must have full path!

Guest

Now works perfect.

many thanks
Alfredo

Seth

pfSense RC1
Lightsquid 1.7.1

404 error when trying to view report

dvserg

@Seth:

pfSense RC1
Lightsquid 1.7.1

404 error when trying to view report

squid transparent?

Shackattack

@dvserg:

squid transparent?

Yes. Same here. Squid tranparent and also 404 - Not Found
on /lightsquid/index.cgi

dvserg

@Shackattack:

@dvserg:

squid transparent?

Yes. Same here. Squid tranparent and also 404 - Not Found
on /lightsquid/index.cgi

Do you test with non-transparent squid mode? And pls test access from browser as
'http://youpfsense/lightsquid/index.cgi'
This different with url from GUI

heiko

I have tested it with transparent and non-transparent, with both configurations it´s a 404 - index.cgi not found…. and the report is not going on
Reinstall lightsquid package is not helpful.
Greetings
heiko

Seth

Transparent non-transpart modes fail. 'http://youpfsense/lightsquid/index.cgi' also fails with a 404 error.

dvserg

@Seth:

Transparent non-transpart modes fail. 'http://youpfsense/lightsquid/index.cgi' also fails with a 404 error.

delete package lightsquid
go to command prompt and execute 'pkg_delete lightsquid-1.7.1_1' command
install lightsquid

bug exists on deletion package. Will looking for this bug..

heiko

for me it works, thanks a lot dvserg

Seth

That did the trick

Thanks for your help ;)

SatireWolf

I am having a problem with this version of lightsquid on the 1.2 release versions (final not the RC's).

I updated from 1.2RC2 to RC3 and then to 1.2 final and lightsquid quit working. I tried reinstalling the package to no avail.

I get a 500 internal server error when attempting to access the index.cgi. I tried the command prompt pkg_delete but I get this:

pkg_delete lightsquid-1.7.1_1

pkg_delete: the package info for package 'pcre-6.6_1' is corrupt
pkg_delete: the package info for package 'pcre-6.6_1' is corrupt
pkg_delete: the package info for package 'pcre-6.6_1' is corrupt
pkg_delete: the package info for package 'pcre-6.6_1' is corrupt
pkg_delete: the package info for package 'pcre-6.6_1' is corrupt
pkg_delete: the package info for package 'pcre-6.6_1' is corrupt
pkg_delete: the package info for package 'pcre-6.6_1' is corrupt

if I install it again, I have my old configuration still and all the processed logs are still there, but it still doesn't work right.

I noticed there is some issue with one of the cgi files being compiled for the older version of perl or something? Is there a fix for 1.2 final for this?

mnelson

I hate to dig this thread up, but I figured it would be better than starting a new one.

I'm seeing the same behavior as the original poster. When clicking “LightSquid" under "Proxy Report” The following is displayed:

LigthSquid diagnostic.
Error : report folder '/var/lightsquid/report' not contain any valid data! Please run lightparser.pl (and check 'report' folder content)
Please check config file !
–------------------------------------------------------------------------------
Variable value
$tplpatph /usr/local/www/lightsquid/tpl
$templatename base
$langpatph /usr/local/share/lightsquid/lang
$langname eng
$reportpath /var/lightsquid/report
Access to '/var/lightsquid/report' folder yes

folder content:

I've enabled logging in the proxy server, as well as "Allow users on interface" check box checked. I've also tried it with the "Transparent proxy" check box checked as well as unchecked.

Any help would be appreciated.

Thanks

-Marty

dvserg

squid:
– Enable log option
-- Set log path as /var/squid/log
-- use squid 5-10 min (web browsing trough squid)
lightsquid
-- click Refresh_now
-- goto Lightsquid tab

mnelson

Everything's done as you suggested, yet it still gives the exact same message as I posted. What am I missing?

dvserg

This message man only, what LS not have information in his DB. For update information to LS db need have enabling squid log and squid must create log file in '/var/squid/log'.
Can you checking /var/squid/log/access.log file for exists?

mnelson

Access.log exists in /var/squid/log/, however it's empty…shocker right!

mnelson

I don;t know how or why, but it seems to be working perfectly now. Thanks for the help!

-Marty

jan.gestre

@dvserg:

This message man only, what LS not have information in his DB. For update information to LS db need have enabling squid log and squid must create log file in '/var/squid/log'.
Can you checking /var/squid/log/access.log file for exists?

I'm experiencing the same issue, I've already reinstalled squid and lightsquid and repeat the same process thrice with futile results, /var/squid/log/access.log exists but empty, cache log though is not. I have 2 new pfsense deployment having this same issue but in my previous installations everything is working fine, I have no idea why this is happening, any ideas how to resolve this?

TIA

dvserg

@jan:

@dvserg:

This message man only, what LS not have information in his DB. For update information to LS db need have enabling squid log and squid must create log file in '/var/squid/log'.
Can you checking /var/squid/log/access.log file for exists?

I'm experiencing the same issue, I've already reinstalled squid and lightsquid and repeat the same process thrice with futile results, /var/squid/log/access.log exists but empty, cache log though is not. I have 2 new pfsense deployment having this same issue but in my previous installations everything is working fine, I have no idea why this is happening, any ideas how to resolve this?

Squid must work some time for not-empty /var/squid/log/access.log
Also check permissions.