RouterBOARD 44G
-
Hi, first of all i must thanks all of pfSense stuff. great work, great product.
Now im trying to build my new firewall on pfSense 1.2-RC2 with 4 port nic RouterBoard 44G.
My problem is, that pfSense know only 1 port from 4 on this nic.
Please, how can i make function the other ports from this nic?
This is my dmesg.
Copyright 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-RELEASE-p7 #0: Fri Aug 17 17:14:44 EDT 2007
sullrich@builder6.pfsense.com:/usr/obj.pfSense/usr/src/sys/pfSense.6
ACPI APIC Table: <intel dg965co="">Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Celeron(R) CPU 215 @ 1.33GHz (1333.39-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6e8 Stepping = 8
Features=0xafe9fbff <fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,tm,pbe>Features2=0xc109<sse3,mon,tm2,<b14>,<b15>>
AMD Features=0x100000 <nx>real memory = 1038598144 (990 MB)
avail memory = 1006223360 (959 MB)
ioapic0: Changing APIC ID to 4
ioapic0 <version 1.4="">irqs 0-23 on motherboard
wlan: mac acl policy registered
kbd1 at kbdmux0
ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <intel dg965co="">on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <acpi cpu="">on acpi0
acpi_throttle0: <acpi cpu="" throttling="">on cpu0
pcib0: <acpi host-pci="" bridge="">port 0xcf8-0xcff iomem 0xfff00000-0xffffffff on acpi0
pci0: <acpi pci="" bus="">on pcib0
pcib1: <acpi pci-pci="" bridge="">at device 1.0 on pci0
pci1: <acpi pci="" bus="">on pcib1
pci1: <display, vga="">at device 0.0 (no driver attached)
isab0: <pci-isa bridge="">at device 2.0 on pci0
isa0: <isa bus="">on isab0
atapci0: <sis 964="" udma133="" controller="">port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x3280-0x328f at device 2.5 on pci0
ata0: <ata 0="" channel="">on atapci0
ata1: <ata 1="" channel="">on atapci0
pci0: <multimedia, audio="">at device 2.7 (no driver attached)
ohci0: <sis 5571="" usb="" controller="">mem 0x4a204000-0x4a204fff irq 20 at device 3.0 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: <sis 5571="" usb="" controller="">on ohci0
usb0: USB revision 1.0
uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1: <sis 5571="" usb="" controller="">mem 0x4a203000-0x4a203fff irq 21 at device 3.1 on pci0
ohci1: [GIANT-LOCKED]
usb1: OHCI version 1.0, legacy support
usb1: <sis 5571="" usb="" controller="">on ohci1
usb1: USB revision 1.0
uhub1: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
ohci2: <sis 5571="" usb="" controller="">mem 0x4a202000-0x4a202fff irq 22 at device 3.2 on pci0
ohci2: [GIANT-LOCKED]
usb2: OHCI version 1.0, legacy support
usb2: <sis 5571="" usb="" controller="">on ohci2
usb2: USB revision 1.0
uhub2: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0: <ehci (generic)="" usb="" 2.0="" controller="">mem 0x4a201000-0x4a201fff irq 23 at device 3.3 on pci0
ehci0: [GIANT-LOCKED]
usb3: waiting for BIOS to give up control
usb3: timed out waiting for BIOS
usb3: EHCI version 1.0
usb3: companion controllers, 3 ports each: usb0 usb1 usb2
usb3: <ehci (generic)="" usb="" 2.0="" controller="">on ehci0
usb3: USB revision 2.0
uhub3: SiS EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 8 ports with 8 removable, self powered
sis0: <sis 10="" 900="" 100basetx="">port 0x3000-0x30ff mem 0x4a200000-0x4a200fff irq 19 at device 4.0 on pci0
miibus0: <mii bus="">on sis0
ukphy0: <generic ieee="" 802.3u="" media="" interface="">on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sis0: Ethernet address: 00:19:d1:df:9d:ee
pcib2: <acpi pci-pci="" bridge="">at device 5.0 on pci0
pci2: <acpi pci="" bus="">on pcib2
pci2: <network, ethernet="">at device 8.0 (no driver attached)
pci2: <network, ethernet="">at device 9.0 (no driver attached)
pci2: <network, ethernet="">at device 10.0 (no driver attached)
re0: <realtek 8169sb="" 8110sb="" single-chip="" gigabit="" ethernet="">port 0x1000-0x10ff mem 0x4a000000-0x4a0000ff irq 16 at device 11.0 on pci2
miibus1: <mii bus="">on re0
rgephy0: <rtl8169s 8110s="" media="" interface="">on miibus1
rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
re0: Ethernet address: 00:0c:42:07:36:3b
re0: [FAST]
pcib3: <pci-pci bridge="">at device 31.0 on pci0
pci3: <pci bus="">on pcib3
acpi_button0: <power button="">on acpi0
atkbdc0: <keyboard controller="" (i8042)="">port 0x60,0x64 irq 1 on acpi0
atkbd0: <at keyboard="">irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
speaker0: <pc speaker="">port 0x61 on acpi0
ppc0: <ecp parallel="" printer="" port="">port 0x378-0x37f,0x778-0x77b irq 7 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: <parallel port="" bus="">on ppc0
lpt0: <printer>on ppbus0
lpt0: Interrupt-driven port
ppi0: <parallel i="" o="">on ppbus0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
pmtimer0 on isa0
orm0: <isa option="" rom="">at iomem 0xc0000-0xcffff on isa0
sc0: <system console="">at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <generic isa="" vga="">at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 1333385310 Hz quality 800
Timecounters tick every 1.000 msec
Fast IPsec: Initialized Security Association Processing.
ad0: 38166MB <wdc wd400bb-55jkc0="" 05.01c05="">at ata0-master UDMA100
Trying to mount root from ufs:/dev/ad0s1a
sis0: link state changed to UP
re0: link state changed to DOWN
pflog0: promiscuous mode enabled
re0: link state changed to UP
re0: link state changed to DOWN
re0: link state changed to UP
re0: link state changed to DOWN
re0: link state changed to UP
re0: link state changed to DOWN
re0: link state changed to UP
re0: link state changed to DOWN
re0: link state changed to UP</wdc></generic></system></isa></parallel></printer></parallel></ecp></pc></at></keyboard></power></pci></pci-pci></rtl8169s></mii></realtek></network,></network,></network,></acpi></acpi></generic></mii></sis></ehci></ehci></sis></sis></sis></sis></sis></sis></multimedia,></ata></ata></sis></isa></pci-isa></display,></acpi></acpi></acpi></acpi></acpi></acpi></intel></version></nx></b15></sse3,mon,tm2,<b14></fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,tm,pbe></intel > -
Driver for "re" is build directly in kernel? Or, how can i load or unload this module?
-
The driver is fine, it works for one of the NIC's.
Typically when you have NIC's installed that don't appear, you need to change some BIOS settings (set PNP OS to no, turn off unused hardware), and/or upgrade to the latest BIOS as BIOS bugs can cause this.
-
Thanks, i tryd all of these attempt. But without any change.
Im using this motherboard with latest bios.
http://www.intel.com/products/motherboard/D201GLY/index.htmI disabled all of unnecessary hardware. No change. :-(
I tryd allso boot pfSense with ACPI disabled. No chenge. :-(Any other OS (Windows xp, Windows 2003, Ubuntu 6.06 LTS) can use my 44G nic without any problem.
I dont know, WHY it is happening if driver works well with one port.
-
dmesg show one port of 44G nic as 8169SB, but on routerbord.com website (http://routerboard.com/rb44.html) is 8169SC. It is possible, tat this is that problem?
-
I made some tests.
This RouterBoard 44G nic function properly on another system, when boot from pfSense boot CD.
So, i thing its something about IRQ, plug and play, or other thinks. But in bios setup of D201GLY motherboard is nothing to set about PNP OS support. :-(
It is chance to resolv this issue another way? FBSD way?
-
Do you thing, other mainboard can resolv my trouble?
Can anyone recommend me other mini-itx mainboard with same power?
I want to use it for pfSense, NAT, two DMZ, OpenVPN - for administratins, trafic to 100 mbps, about 15000 states. It will function as firewall in front of my servers in hosting center.
-
Wht do you thing about:
http://www.supermicro.com/products/system/1U/5015/SYS-5015M-MF+.cfm
Is it recomended fot pfSense?
-
The board used in that chassis is the PDSMI+ and it seems like another user here is having some problems with that board, not with the NICs that you are using though. I've used this board in a Linux environment without issues, it works rather well.
Heres the thread http://forum.pfsense.org/index.php/topic,6695.0.html
Have you tried flashing the bios on the D201? The latest bios is dated 10/25.
-
The board used in that chassis is the PDSMI+ and it seems like another user here is having some problems with that board, not with the NICs that you are using though. I've used this board in a Linux environment without issues, it works rather well.
Heres the thread http://forum.pfsense.org/index.php/topic,6695.0.html
Have you tried flashing the bios on the D201? The latest bios is dated 10/25.
Thanks for that thread. I rather not to choose this hardware. Rather to find another, fully tested and supported by pfSense. Can you recomend me any?
Yeah, im running this latest bios on my Intel D201GLY. No change. The same problem. No chance to Enable/Disable PNP bios features. Only one port on RouterBoard 44G function ok.
-
Now, i must say, that after i install pfSense 1.2 FINAL, as i describe here http://forum.pfsense.org/index.php/topic,6774.0.html, i found that Router Board 44G function properly.
So this combination of hardware and software works great:
Mainboard: Intel D201GLY - bios LY66210M.86A from 1/4/2008 - http://www.intel.com/products/motherboard/D201GLY/index.htm
NIC card: RouterBoard 44 G - http://www.routerboard.com/rb44.html
1U rack case - http://www.emko.cz/emko_cz/produkty/skrine/miniitx/em-161.htmlpfSense 1.2 FINAL