Multiple lan subnets work with mono not with pfsense.
-
hello i have the following situation
wan -----pfsense-----cisco---192.168.0.1------switch----clients 192.168.0.0/24 | |-----192.168.1.0/24 | |------192.168.2.0/24
i placed in monowall static routes to the 192.168.1.0/24 and 192.168.2.0/24 network.
Those two networks are conected through the ciscoAll is working fine on monowall
i have replaced the monowall box with pfsence 1.2rc3.
The local lan 192.168.0.0/24 all can go to the internet.
the clients on the 192.168.1.0/24 and the the clients on 192.168.2.0/24 network dont get on the internet.
With traceroute they reach the pfsense box but there it stops.Am i missing something, not needed in monowall but needs to be set in pfsense.
I also try'ed using the advandsed option to disable the whole firewall but still no goThanks for your time.
regards,
Johan -
activate Advanced Outbound NAT and create a rule for every subnet other than LAN you want NATed to WAN.
-
Thank you very much.
One more question,
Wich NAT do i needAutomatic outbound NAT rule generation (IPSEC passthrough) or:
Manual Outbound NAT rule generation (Advanced Outbound NAT (AON))Thanks again
-
the automatic is enabled by default.
like i wrote: you need to enable "advanced outbound NAT" (manual outbound NAT rules)also see: http://forum.pfsense.org/index.php/topic,7001.msg39657.html#msg39657
if you are running IPsec clients in your network you might want to enable the static port option.
(search the forum on this) -
Sorry i need to read better !!
Thanks for the info.