CARP LAN both are master.

Sylhouette

If i use the packet capture (gui) in pfsense for wich packages must i look for.(the missing multicast).
I do not have fysical access to the router, so i can not go to console.

Secondly is there a list of switches that work out of the box and which do not.

I did not replace the switch (we do not have them in stock!!) but i do not use Captive Portal.

dtran

@Sullrich,
here is the capture of ipfw show on the 2nd pfsense box in which the LAN CARP is showing as master instead of backup.

pfsense2:~# ipfw show
00030 2537 886901 skipto 50000 ip from any to any in via rl1 keep-state
00030 490 98976 skipto 50000 ip from any to any in via rl0 keep-state
00500 272 15232 allow ip from 128.97.205.3 to any out via rl2
00501 0 0 allow ip from any to 128.97.205.3 in via rl2
01000 199 35301 skipto 50000 ip from any to any not layer2 not via rl2
01001 199 35301 allow ip from any to any layer2 not via rl2
01100 1 28 allow ip from any to any layer2 mac-type 0x0806
01100 0 0 allow ip from any to any layer2 mac-type 0x888e
01100 0 0 allow ip from any to any layer2 mac-type 0x88c7
01100 0 0 allow ip from any to any layer2 mac-type 0x8863
01100 0 0 allow ip from any to any layer2 mac-type 0x8864
01100 0 0 allow ip from any to any layer2 mac-type 0x8863
01100 0 0 allow ip from any to any layer2 mac-type 0x8864
01100 0 0 allow ip from any to any layer2 mac-type 0x888e
01101 0 0 deny ip from any to any layer2 not mac-type 0x0800
01102 192 10752 skipto 20000 ip from any to any layer2
01200 0 0 allow udp from any 68 to 255.255.255.255 dst-port 67 in
01201 0 0 allow udp from any 68 to 128.97.205.3 dst-port 67 in
01202 0 0 allow udp from 128.97.205.3 67 to any dst-port 68 out
01203 0 0 allow icmp from 128.97.205.3 to any out icmptypes 8
01204 0 0 allow icmp from any to 128.97.205.3 in icmptypes 0
01300 0 0 allow udp from any to 128.97.205.3 dst-port 53 in
01301 0 0 allow udp from 128.97.205.3 53 to any out
01302 0 0 allow tcp from any to 128.97.205.3 dst-port 8000 in
01303 0 0 allow tcp from 128.97.205.3 8000 to any out
01304 0 0 allow tcp from any to 128.97.205.3 dst-port 8001 in
01305 0 0 allow tcp from 128.97.205.3 8001 to any out
10000 0 0 skipto 50000 ip from any to 128.97.186.150 in
10000 0 0 skipto 50000 ip from 128.97.186.150 to any out
10001 0 0 skipto 50000 ip from any to 128.97.229.250 in
10001 0 0 skipto 50000 ip from 128.97.229.250 to any out
10002 0 0 skipto 50000 ip from any to 164.67.128.1 in
10002 0 0 skipto 50000 ip from 164.67.128.1 to any out
10003 0 0 skipto 50000 ip from any to 164.67.128.2 in
10003 0 0 skipto 50000 ip from 164.67.128.2 to any out
10004 0 0 skipto 50000 ip from any to 164.67.62.100 in
10004 0 0 skipto 50000 ip from 164.67.62.100 to any out
10005 0 0 skipto 50000 ip from any to 164.67.62.101 in
10005 0 0 skipto 50000 ip from 164.67.62.101 to any out
10006 0 0 skipto 50000 ip from any to 164.67.62.102 in
10006 0 0 skipto 50000 ip from 164.67.62.102 to any out
10007 0 0 skipto 50000 ip from any to 169.232.33.135 in
10007 0 0 skipto 50000 ip from 169.232.33.135 to any out
10008 0 0 skipto 50000 ip from any to 169.232.35.150 in
10008 0 0 skipto 50000 ip from 169.232.35.150 to any out
10009 0 0 skipto 50000 ip from any to 169.232.46.139 in
10009 0 0 skipto 50000 ip from 169.232.46.139 to any out
10010 0 0 skipto 50000 ip from any to 169.232.47.139 in
10010 0 0 skipto 50000 ip from 169.232.47.139 to any out
10011 0 0 skipto 50000 ip from any to 169.232.48.139 in
10011 0 0 skipto 50000 ip from 169.232.48.139 to any out
10012 0 0 skipto 50000 ip from any to 169.232.48.157 in
10012 0 0 skipto 50000 ip from 169.232.48.157 to any out
19902 0 0 fwd 127.0.0.1,8000 tcp from any to any dst-port 80 in
19903 0 0 allow tcp from any 80 to any out
19904 192 10752 deny ip from any to any
29900 192 10752 allow ip from any to any layer2
65535 3229 1021346 allow ip from any to any

sullrich

I just commited some fixes for this. Please install a snapshot from http://snapshots.pfsense.com/FreeBSD6/RELENG_1_2/updates/ in 2-3 hours from now.

dtran

I updated firmware on both boxes. It is showing:

1.2-RC3
built on Mon Dec 10 16:14:30 EST 2007

anyway, the new firmware still showing the same status as before.
On the 2nd box, wan-carp is "back-up" and lan-carp status is still "master" when captive portal is enabled on the 2nd box. At the same time, box #1 is showing both wan-carp and lan-carp as master (captive portal also enabled),

Also, when I manually disable captive portal on the second box, console via com port is showing:

IP firewall unloaded
Warning: memory type IpFw/IpAcct leaked memory on destroy (1 allocations, 1024 b
ytes leaked).
ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding enabled, defau
lt to accept, logging disabled

sullrich

Do you see two new rules of "ipfw show" that mention carp and pfsync?

dtran

no - I did not see that at all.
I compared the old output and new and they are nearly identical.
Let me look closer.

edit: I did not see anything different.

sullrich

Tell me if /etc/inc/captiveportal.inc has pfsync and carp in it.

You can do this from a shell: cat /etc/inc/captiveportal.inc | grep pfsync

dtran

No. nothing there.
grep for pfsync in /etc/inc/captiveportal.inc does not show any occurrence of pfsync.

sullrich

Then you must have upgraded before the snapshot server created the newer images.

Please upgrade to an image from http://snapshots.pfsense.com/FreeBSD6/RELENG_1_2/updates/pfSense-Full-Update-1.2-RC3.tgz

dtran

do you have the full-embedded image because that's what I'm using here.
Thanks

edit: I'm getting the pfSense-Embedded-Update-1.2-RC3.tgz - will that work?

edit 2: I upgraded both boxes with new image.
cat /etc/inc/captiveportal.inc | grep pfsync is not showing anything.

The 2nd box is still showing "master" on lan-carp when captiveportal is enabled.
I guess the pfSense-Embedded-Update-1.2-RC3.tgz does not have the patch.
system overview is showing:
1.2-RC3
built on Tue Dec 11 11:52:19 EST 2007

sullrich

Reinstall from a recent snapshot then, please.

dtran

Do you mean you want me to physdiskwrite using the pfSense-Embedded-Update-1.2-RC3.tgz rather than the firmware load via the GUI ?

sullrich

Yep.

dtran

I'm sorry, I think i am missing something elementary here.
physdiskwrite using the pfSense-Embedded-Update-1.2-RC3.tgz - cannot boot after that

Using an older image, I can boot up just fine.

I notice that, with the new imagem using physdiskwrite I get:

Found compressed image file
62023680/62023680 bytes written in total

and using and older image, I get:
Found compressed image file
122441728/122441728 bytes written in total

sullrich

http://snapshots.pfsense.com/FreeBSD6/RELENG_1_2/embedded/pfSense.img.gz .. That other file was an update file.. Sorry.

dtran

Reinstalled from scratch using the suggested snapshot.
Problem is still there.
2nd box is still showing lan-carp as master when captive portal is enabled.

cat /etc/inc/captiveportal.inc | grep pfsync is not showing anything.

note: reinstall done on both boxes..

dtran

Hi,
Any new development on this ? - Thanks

sullrich

Our snapshot system is busted currently. There is an open ticket that I need to check into.

In the meantime, replace /etc/inc/captiveportal.inc with http://pfsense.com/cgi-bin/cvsweb.cgi/pfSense/etc/inc/captiveportal.inc?rev=1.58.2.42.2.6;content-type=text%2Fplain;only_with_tag=RELENG_1_2

dtran

I replaced the captiveportal.inc you provided on both boxes.

cat /etc/inc/captiveportal.inc | grep pfsync is showing:
$cprules = "add 500 set 1 allow pfsync from any to any\n";
ipfw show is showing:
00500 1347 328072 allow pfsync from any to any
00500 2086 116816 allow carp from any to any
00500 11 608 allow ip from 128.97.205.2 to any out via rl2

scenario #1

box#1 (captiveportal ON), box#2 (captiveportal OFF).
On box#1 - wan-carp and lan-carp are both master
On box#2 - wan-carp is backup and lan-carp is master

Before replacing the file, this showed "backup" for both carps.

Scenario #2

box#1 (captiveportal ON), box#2 (captiveportal ON).
Same as above.

sullrich

Well I am at my wits end then. This really should have fixed it.