Lightsquid broken after last upgrade
-
I have success installation on two my 1.2RC3 (VMWare).
Please send to my mail or PM file '/tmp/pkg_mgr_Lightsquid.log'Load config file /usr/local/etc/lightsquid/lightsquid.cfg Update config: cfgpath="/usr/local/etc/lightsquid" Update config: logpath="/var/squid/log" Update config: tplpath="/usr/local/www/lightsquid/tpl" Update config: langpath="/usr/local/share/lightsquid/lang" Update config: reportpath="/var/lightsquid/report" Update config: ip2namepath="/usr/local/libexec/lightsquid" Update config: lang="eng"; Update config: templatename="novosea"; Update config: ip2name="ip"; Update config: skipurl="zzz\.zzz" Update config: squidlogtype=0 Update config: barcolor="red"; Save config file /usr/local/etc/lightsquid/lightsquid.cfg () ls_setup_cron: start task_name=lightsquid_parser, task_key=/lightparser.pl, on_off=1 ls_setup_cron: found cron task with name=lightsquid_parser on []. ls_setup_cron: found cron task with key=/lightparser.pl on [10]. ls_setup_cron: add cron task 'lightsquid_parser'='/usr/bin/perl /usr/local/www/lightsquid/lightparser.pl today' ls_setup_cron: end ls_setup_cron: start task_name=lightsquid_squid_rotate, task_key=/squid -k rotate, on_off=1 ls_setup_cron: found cron task with name=lightsquid_squid_rotate on []. ls_setup_cron: found cron task with key=/squid -k rotate on [10]. ls_setup_cron: add cron task 'lightsquid_squid_rotate'='/usr/local/sbin/squid -k rotate > /dev/null' ls_setup_cron: end Load config file /usr/local/etc/lightsquid/lightsquid.cfg Update config: cfgpath="/usr/local/etc/lightsquid" Update config: logpath="/var/squid/log" Update config: tplpath="/usr/local/www/lightsquid/tpl" Update config: langpath="/usr/local/share/lightsquid/lang" Update config: reportpath="/var/lightsquid/report" Update config: ip2namepath="/usr/local/libexec/lightsquid" Update config: lang="eng"; Update config: templatename="novosea"; Update config: ip2name="ip"; Update config: skipurl="zzz\.zzz" Update config: squidlogtype=0 Update config: barcolor="red"; Save config file /usr/local/etc/lightsquid/lightsquid.cfg () ls_setup_cron: start task_name=lightsquid_parser, task_key=/lightparser.pl, on_off=1 ls_setup_cron: found cron task with name=lightsquid_parser on []. ls_setup_cron: found cron task with key=/lightparser.pl on [10]. ls_setup_cron: add cron task 'lightsquid_parser'='/usr/bin/perl /usr/local/www/lightsquid/lightparser.pl today' ls_setup_cron: end ls_setup_cron: start task_name=lightsquid_squid_rotate, task_key=/squid -k rotate, on_off=1 ls_setup_cron: found cron task with name=lightsquid_squid_rotate on []. ls_setup_cron: found cron task with key=/squid -k rotate on [10]. ls_setup_cron: add cron task 'lightsquid_squid_rotate'='/usr/local/sbin/squid -k rotate > /dev/null' ls_setup_cron: end Load config file /usr/local/etc/lightsquid/lightsquid.cfg Update config: cfgpath="/usr/local/etc/lightsquid" Update config: logpath="/var/squid/log" Update config: tplpath="/usr/local/www/lightsquid/tpl" Update config: langpath="/usr/local/share/lightsquid/lang" Update config: reportpath="/var/lightsquid/report" Update config: ip2namepath="/usr/local/libexec/lightsquid" Update config: lang="eng"; Update config: templatename="novosea"; Update config: ip2name="ip"; Update config: skipurl="zzz\.zzz" Update config: squidlogtype=0 Update config: barcolor="yellow"; Save config file /usr/local/etc/lightsquid/lightsquid.cfg () ls_setup_cron: start task_name=lightsquid_parser, task_key=/lightparser.pl, on_off=1 ls_setup_cron: found cron task with name=lightsquid_parser on []. ls_setup_cron: found cron task with key=/lightparser.pl on [10]. ls_setup_cron: add cron task 'lightsquid_parser'='/usr/bin/perl /usr/local/www/lightsquid/lightparser.pl today' ls_setup_cron: end ls_setup_cron: start task_name=lightsquid_squid_rotate, task_key=/squid -k rotate, on_off=1 ls_setup_cron: found cron task with name=lightsquid_squid_rotate on []. ls_setup_cron: found cron task with key=/squid -k rotate on [10]. ls_setup_cron: add cron task 'lightsquid_squid_rotate'='/usr/local/sbin/squid -k rotate > /dev/null' ls_setup_cron: end refresh_full: start refresh_full: execute command '/usr/bin/perl /usr/local/www/lightsquid/lightparser.pl' refresh_full: execute command '/usr/bin/perl /usr/local/www/lightsquid/lightparser.pl access.log.0' refresh_full: stop refresh_now: execute command '/usr/bin/perl /usr/local/www/lightsquid/lightparser.pl today' Load config file /usr/local/etc/lightsquid/lightsquid.cfg Update config: cfgpath="/usr/local/etc/lightsquid" Update config: logpath="/var/squid/log" Update config: tplpath="/usr/local/www/lightsquid/tpl" Update config: langpath="/usr/local/share/lightsquid/lang" Update config: reportpath="/var/lightsquid/report" Update config: ip2namepath="/usr/local/libexec/lightsquid" Update config: lang="eng"; Update config: templatename="novosea"; Update config: ip2name="squidauth"; Update config: skipurl="zzz\.zzz" Update config: squidlogtype=0 Update config: barcolor="yellow"; Save config file /usr/local/etc/lightsquid/lightsquid.cfg () ls_setup_cron: start task_name=lightsquid_parser, task_key=/lightparser.pl, on_off=1 ls_setup_cron: found cron task with name=lightsquid_parser on []. ls_setup_cron: found cron task with key=/lightparser.pl on [10]. ls_setup_cron: add cron task 'lightsquid_parser'='/usr/bin/perl /usr/local/www/lightsquid/lightparser.pl today' ls_setup_cron: end ls_setup_cron: start task_name=lightsquid_squid_rotate, task_key=/squid -k rotate, on_off=1 ls_setup_cron: found cron task with name=lightsquid_squid_rotate on []. ls_setup_cron: found cron task with key=/squid -k rotate on [10]. ls_setup_cron: add cron task 'lightsquid_squid_rotate'='/usr/local/sbin/squid -k rotate > /dev/null' ls_setup_cron: end Load config file /usr/local/etc/lightsquid/lightsquid.cfg Update config: cfgpath="/usr/local/etc/lightsquid" Update config: logpath="/var/squid/log" Update config: tplpath="/usr/local/www/lightsquid/tpl" Update config: langpath="/usr/local/share/lightsquid/lang" Update config: reportpath="/var/lightsquid/report" Update config: ip2namepath="/usr/local/libexec/lightsquid" Update config: lang="eng"; Update config: templatename="novosea"; Update config: ip2name="demo"; Update config: skipurl="zzz\.zzz" Update config: squidlogtype=0 Update config: barcolor="yellow"; Save config file /usr/local/etc/lightsquid/lightsquid.cfg () ls_setup_cron: start task_name=lightsquid_parser, task_key=/lightparser.pl, on_off=1 ls_setup_cron: found cron task with name=lightsquid_parser on []. ls_setup_cron: found cron task with key=/lightparser.pl on [10]. ls_setup_cron: add cron task 'lightsquid_parser'='/usr/bin/perl /usr/local/www/lightsquid/lightparser.pl today' ls_setup_cron: end ls_setup_cron: start task_name=lightsquid_squid_rotate, task_key=/squid -k rotate, on_off=1 ls_setup_cron: found cron task with name=lightsquid_squid_rotate on []. ls_setup_cron: found cron task with key=/squid -k rotate on [10]. ls_setup_cron: add cron task 'lightsquid_squid_rotate'='/usr/local/sbin/squid -k rotate > /dev/null' ls_setup_cron: end Load config file /usr/local/etc/lightsquid/lightsquid.cfg Update config: cfgpath="/usr/local/etc/lightsquid" Update config: logpath="/var/squid/log" Update config: tplpath="/usr/local/www/lightsquid/tpl" Update config: langpath="/usr/local/share/lightsquid/lang" Update config: reportpath="/var/lightsquid/report" Update config: ip2namepath="/usr/local/libexec/lightsquid" Update config: lang="eng"; Update config: templatename="novosea"; Update config: ip2name="ip"; Update config: skipurl="zzz\.zzz" Update config: squidlogtype=0 Update config: barcolor="red"; Save config file /usr/local/etc/lightsquid/lightsquid.cfg () ls_setup_cron: start task_name=lightsquid_parser, task_key=/lightparser.pl, on_off=1 ls_setup_cron: found cron task with name=lightsquid_parser on []. ls_setup_cron: found cron task with key=/lightparser.pl on [10]. ls_setup_cron: add cron task 'lightsquid_parser'='/usr/bin/perl /usr/local/www/lightsquid/lightparser.pl today' ls_setup_cron: end ls_setup_cron: start task_name=lightsquid_squid_rotate, task_key=/squid -k rotate, on_off=1 ls_setup_cron: found cron task with name=lightsquid_squid_rotate on []. ls_setup_cron: found cron task with key=/squid -k rotate on [10]. ls_setup_cron: add cron task 'lightsquid_squid_rotate'='/usr/local/sbin/squid -k rotate > /dev/null' ls_setup_cron: end refresh_now: execute command '/usr/bin/perl /usr/local/www/lightsquid/lightparser.pl today' refresh_full: start refresh_full: execute command '/usr/bin/perl /usr/local/www/lightsquid/lightparser.pl' refresh_full: execute command '/usr/bin/perl /usr/local/www/lightsquid/lightparser.pl access.log.0' refresh_full: stop Load config file /usr/local/etc/lightsquid/lightsquid.cfg Update config: cfgpath="/usr/local/etc/lightsquid" Update config: logpath="/var/squid/log" Update config: tplpath="/usr/local/www/lightsquid/tpl" Update config: langpath="/usr/local/share/lightsquid/lang" Update config: reportpath="/var/lightsquid/report" Update config: ip2namepath="/usr/local/libexec/lightsquid" Update config: lang="eng"; Update config: templatename="novosea"; Update config: ip2name="ip"; Update config: skipurl="zzz\.zzz" Update config: squidlogtype=0 Update config: barcolor="red"; Save config file /usr/local/etc/lightsquid/lightsquid.cfg () ls_setup_cron: start task_name=lightsquid_parser, task_key=/lightparser.pl, on_off=1 ls_setup_cron: found cron task with name=lightsquid_parser on []. ls_setup_cron: found cron task with key=/lightparser.pl on [10]. ls_setup_cron: add cron task 'lightsquid_parser'='/usr/bin/perl /usr/local/www/lightsquid/lightparser.pl today' ls_setup_cron: end ls_setup_cron: start task_name=lightsquid_squid_rotate, task_key=/squid -k rotate, on_off=1 ls_setup_cron: found cron task with name=lightsquid_squid_rotate on []. ls_setup_cron: found cron task with key=/squid -k rotate on [10]. ls_setup_cron: add cron task 'lightsquid_squid_rotate'='/usr/local/sbin/squid -k rotate > /dev/null' ls_setup_cron: end refresh_now: execute command '/usr/bin/perl /usr/local/www/lightsquid/lightparser.pl today' refresh_full: start refresh_full: execute command '/usr/bin/perl /usr/local/www/lightsquid/lightparser.pl' refresh_full: execute command '/usr/bin/perl /usr/local/www/lightsquid/lightparser.pl access.log.0' refresh_full: stop Load config file /usr/local/etc/lightsquid/lightsquid.cfg Update config: cfgpath="/usr/local/etc/lightsquid" Update config: logpath="/var/squid/log" Update config: tplpath="/usr/local/www/lightsquid/tpl" Update config: langpath="/usr/local/share/lightsquid/lang" Update config: reportpath="/var/lightsquid/report" Update config: ip2namepath="/usr/local/libexec/lightsquid" Update config: lang="eng"; Update config: templatename="novosea"; Update config: ip2name="ip"; Update config: skipurl="zzz\.zzz" Update config: squidlogtype=0 Update config: barcolor="red"; Save config file /usr/local/etc/lightsquid/lightsquid.cfg () ls_setup_cron: start task_name=lightsquid_parser, task_key=/lightparser.pl, on_off=1 ls_setup_cron: found cron task with name=lightsquid_parser on []. ls_setup_cron: found cron task with key=/lightparser.pl on [10]. ls_setup_cron: add cron task 'lightsquid_parser'='/usr/bin/perl /usr/local/www/lightsquid/lightparser.pl today' ls_setup_cron: end ls_setup_cron: start task_name=lightsquid_squid_rotate, task_key=/squid -k rotate, on_off=1 ls_setup_cron: found cron task with name=lightsquid_squid_rotate on []. ls_setup_cron: found cron task with key=/squid -k rotate on [10]. ls_setup_cron: add cron task 'lightsquid_squid_rotate'='/usr/local/sbin/squid -k rotate > /dev/null' ls_setup_cron: end Load config file /usr/local/etc/lightsquid/lightsquid.cfg Update config: cfgpath="/usr/local/etc/lightsquid" Update config: logpath="/var/squid/log" Update config: tplpath="/usr/local/www/lightsquid/tpl" Update config: langpath="/usr/local/share/lightsquid/lang" Update config: reportpath="/var/lightsquid/report" Update config: ip2namepath="/usr/local/libexec/lightsquid" Update config: lang="eng"; Update config: templatename="novosea"; Update config: ip2name="ip"; Update config: skipurl="zzz\.zzz" Update config: squidlogtype=0 Update config: barcolor="red"; Save config file /usr/local/etc/lightsquid/lightsquid.cfg () ls_setup_cron: start task_name=lightsquid_parser, task_key=/lightparser.pl, on_off=1 ls_setup_cron: found cron task with name=lightsquid_parser on []. ls_setup_cron: found cron task with key=/lightparser.pl on [10]. ls_setup_cron: add cron task 'lightsquid_parser'='/usr/bin/perl /usr/local/www/lightsquid/lightparser.pl today' ls_setup_cron: end ls_setup_cron: start task_name=lightsquid_squid_rotate, task_key=/squid -k rotate, on_off=1 ls_setup_cron: found cron task with name=lightsquid_squid_rotate on []. ls_setup_cron: found cron task with key=/squid -k rotate on [10]. ls_setup_cron: add cron task 'lightsquid_squid_rotate'='/usr/local/sbin/squid -k rotate > /dev/null' ls_setup_cron: end refresh_full: start refresh_full: execute command '/usr/bin/perl /usr/local/www/lightsquid/lightparser.pl' refresh_full: execute command '/usr/bin/perl /usr/local/www/lightsquid/lightparser.pl access.log.0' refresh_full: stop refresh_now: execute command '/usr/bin/perl /usr/local/www/lightsquid/lightparser.pl today' refresh_full: start refresh_full: execute command '/usr/bin/perl /usr/local/www/lightsquid/lightparser.pl' refresh_full: execute command '/usr/bin/perl /usr/local/www/lightsquid/lightparser.pl access.log.0' refresh_full: stop Load config file /usr/local/etc/lightsquid/lightsquid.cfg Update config: cfgpath="/usr/local/etc/lightsquid" Update config: logpath="/var/squid/log" Update config: tplpath="/usr/local/www/lightsquid/tpl" Update config: langpath="/usr/local/share/lightsquid/lang" Update config: reportpath="/var/lightsquid/report" Update config: ip2namepath="/usr/local/libexec/lightsquid" Update config: lang="eng"; Update config: templatename="novosea"; Update config: ip2name="ip"; Update config: skipurl="zzz\.zzz" Update config: squidlogtype=0 Update config: barcolor="red"; Save config file /usr/local/etc/lightsquid/lightsquid.cfg () ls_setup_cron: start task_name=lightsquid_parser, task_key=/lightparser.pl, on_off=1 ls_setup_cron: found cron task with name=lightsquid_parser on []. ls_setup_cron: found cron task with key=/lightparser.pl on [10]. ls_setup_cron: add cron task 'lightsquid_parser'='/usr/bin/perl /usr/local/www/lightsquid/lightparser.pl today' ls_setup_cron: end ls_setup_cron: start task_name=lightsquid_squid_rotate, task_key=/squid -k rotate, on_off=1 ls_setup_cron: found cron task with name=lightsquid_squid_rotate on []. ls_setup_cron: found cron task with key=/squid -k rotate on [10]. ls_setup_cron: add cron task 'lightsquid_squid_rotate'='/usr/local/sbin/squid -k rotate > /dev/null' ls_setup_cron: end Load config file /usr/local/etc/lightsquid/lightsquid.cfg Update config: cfgpath="/usr/local/etc/lightsquid" Update config: logpath="/var/squid/log" Update config: tplpath="/usr/local/www/lightsquid/tpl" Update config: langpath="/usr/local/share/lightsquid/lang" Update config: reportpath="/var/lightsquid/report" Update config: ip2namepath="/usr/local/libexec/lightsquid" Update config: lang="eng"; Update config: templatename="novopf"; Update config: ip2name="ip"; Update config: skipurl="zzz\.zzz" Update config: squidlogtype=0 Update config: barcolor="green"; Save config file /usr/local/etc/lightsquid/lightsquid.cfg () ls_setup_cron: start task_name=lightsquid_parser, task_key=/lightparser.pl, on_off=1 ls_setup_cron: found cron task with name=lightsquid_parser on []. ls_setup_cron: found cron task with key=/lightparser.pl on [10]. ls_setup_cron: add cron task 'lightsquid_parser'='/usr/bin/perl /usr/local/www/lightsquid/lightparser.pl today' ls_setup_cron: end ls_setup_cron: start task_name=lightsquid_squid_rotate, task_key=/squid -k rotate, on_off=1 ls_setup_cron: found cron task with name=lightsquid_squid_rotate on []. ls_setup_cron: found cron task with key=/squid -k rotate on [10]. ls_setup_cron: add cron task 'lightsquid_squid_rotate'='/usr/local/sbin/squid -k rotate > /dev/null' ls_setup_cron: end refresh_now: execute command '/usr/bin/perl /usr/local/www/lightsquid/lightparser.pl today' refresh_full: start refresh_full: execute command '/usr/bin/perl /usr/local/www/lightsquid/lightparser.pl' refresh_full: execute command '/usr/bin/perl /usr/local/www/lightsquid/lightparser.pl access.log.0' refresh_full: execute command '/usr/bin/perl /usr/local/www/lightsquid/lightparser.pl access.log.1' refresh_full: stop refresh_now: execute command '/usr/bin/perl /usr/local/www/lightsquid/lightparser.pl today'
-
i from china.
english is poor.my lightsquid conf
#!/usr/bin/perl # # LightSquid Project (c) 2004-2005 Sergey Erokhin aka ESL # # This program is free software; you can redistribute it and/or # modify it under the terms of the GNU General Public License # as published by the Free Software Foundation; either version 2 # of the License, or (at your option) any later version. # # detail see in gnugpl.txt # -------------------- GLOBAL VARIABLES --------------------------- #path to additional `cfg` files $cfgpath = "/usr/local/etc/lightsquid"; #path to `tpl` folder $tplpath = "/usr/local/www/lightsquid/tpl"; #path to `lang` folder $langpath = "/usr/local/share/lightsquid/lang"; #path to `report` folder $reportpath = "/var/lightsquid/report"; #path to access.log $logpath = "/var/squid/log"; #path to `ip2name` folder $ip2namepath = "/usr/local/libexec/lightsquid"; #path to `lockfile` ;-) $lockpath =$reportpath; #if lockfile older $maxlocktime second, remove old lock file. $maxlocktime = 30*60; #if 1 - lightparser generate some statistic $debug = 0; #if 1 - lightparser generate skip details, 2 ..., 3 ..., .... $debug2 = 0; # -------------------- LightParser VARIABLES --------------------------- #squid log type #if native squid format (default squid, see in doc) - must be 0 #if EmulateHttpdLog ON - set 1 #digit - for speed optimization #try it set to 1 if parser generate warning # #see also month2dec below !!!! # $squidlogtype = 0; #if you want skip some sites from stat, example our local www server #WARNING !!!, don't leave this variable empty !!! #example, if you want skip LOCAL site, put it here #$skipurl = "zdd.com|192\.168\.1\.|cnn.com"; $skipurl = "zzz\.zzz"; #define sobroutine file for convertion from IP into name #if you want skip some ip from log - return "SKIP THIS IP" ;-) #detail see in ip2name folder, $ip2name = "ip";; #use for convert from Text to Dec convertion if EmualteHttpdLog format !!!! #fix it if need %month2dec = ( Jan => 1, Feb => 2, Mar => 3, Apr => 4, May => 5,Jun => 6, Jul => 7, Aug => 8, Sep => 9, Oct => 10, Nov => 11,Dec => 12); # -------------------- Common (Parser & Web) VARIABLES ---------------------- #create & use time report statistic (logsize = logsize*2) ;-)) $timereport = 1; # -------------------- WEB VARIABLES ---------------------------------------- #language #see `lang` folder (avaible: bg,eng,fr,hu,it,pt_br,ru,sp) $lang = "eng";; #html template name #see template folder `tpl/$templatename/` $templatename = "novopf";; #$templatename ="ric"; #$templatename ="base.css"; #define type of decimal output #fine 123456789 -> 123,456,789 #class 123456789 -> 117.7 G $DecOutType="class"; # define delimiter for thousands (in `fine` mode) # = " " -> 12 345 678 # = "," -> 12,345,678 # = "" -> 12345678 $decdelimiter = " "; #if you dont need Group mode, do =0 $showgrouplink = 1; #if not zero, groups look like "01\. Group1", if zero - "Group1" $showgroupid = 1; #if you dont need oversize report , do =0 $showoversizelink = 1; #show how many data user send to internet $showputpost = 0; #if putpost higer this variable (in percent), highlight it $putpostwarninglevel =15; #use or not .realname files #.realname contain pair userid -> Full User Name $userealname = 1; #if url size exceed $bigfilelimit - add this file into report $bigfilelimit = 2*1024*1024; #user maximum size per day limit (oversize) $perusertrafficlimit = 10*1024*1024; # weekend display mode # both - select sunday & monday # monday - only monday $weekendmode="both"; #how many site show in TopSites report $topsiteslimit = 500; #how many site show in user time report $usertimelimit = 200; #if you want user traffic GRAPHIC report, set it in 1 #WARNING !!!, need libgd, GD.PM & other external modules !!! #please run check-setup.pl for check library !!!! $graphreport = 1; #higest value on graph report # for user month report (0.05*(...) = 50mb) $graphmaxuser=0.05*(1024*1024*1024); # for all user month report (1.05*(...) = 1 Gb) $graphmaxall =0.80*(1024*1024*1024); #color scheme for GRAPHICs, avaible "orange","blue","green","yellow","brown","red" $barcolor = "green";; #-------------------------------------------------------------------------- Group support # sub CreateGroupFile($) { my $path=shift; open Fi,"<$cfgpath/group.cfg"; open Fo,">$path/.group"; while (<fi>) { print Fo $_; } close Fo; close Fi; } #-------------------------------------------------------------------------- RealName support # sub CreateRealnameFile($) { my $path=shift; open Fi,"<$cfgpath/realname.cfg"; open Fo,">$path/.realname"; while (<fi>) { print Fo $_; } close Fo; close Fi; }</fi></fi>
-
After testing, by default, it is no problem.
However, I use a custom district. Squid on to the / cache inside.
I changed the conf Lightsquid, there have also been 500 that error message.
Not solve the current swap.
-
I also am having this problem on a fresh install of 1.2-RC3.
It seems that the report is not even being generated by lightsquid when I click "refresh now" or "refresh all"
Also get the error message "500 - internal server error"
Any Ideas on a fix, as we use this a lot for reports for our clients.
Thanks
Mark
-
Looking this ticket - problem here:
http://cvstrac.pfsense.com/tktview?tn=1536
Lighttpd error log after adding perl-5.8.8_1 to system
/libexec/ld-elf.so.1: /usr/local/lib/perl5/5.8.8/mach/CORE/libperl.so: Undefined symbol "__sbmaskrune"Also about problem
http://groups.google.com.br/group/lucky.freebsd.gnome/browse_thread/thread/98c1a9561b55d303/5a7d72db34f5398e?lnk=raot -
temporary way for solve problem - copy library
/usr/local/lib/perl5/5.8.8/mach/CORE/libperl.so
from perl-5.8.8 ver.For example this may be:
- before installation LightSquid store this lib (must be only perl-5.8.8 on 'pkg_info')
- after installation LightSquid - restore lib (old lib must be renamed)
-
Hello
i do not clearly uderstand how to solve this…
pkg_info shows both ver. of perl, 5.8.8 and 5.8.8_1
I have only one folder 5.8.8 in /usr/local/lib/perl5/
I suppouse, I have to find the old library somwhere over the internet, and replace new one? Am i right? -
this method actually before for installation LS
Mail me - i send this lib to you -
this method actually before for installation LS
Mail me - i send this lib to youThanks, worked like a charm
-
this method actually before for installation LS
Mail me - i send this lib to youI faced the same problem too. Can you post the lib file at here? So we can download and replace it easily.
Many thanks!
-
Use this URL:
http://diskatel.narod.ru/libperl.so -
Thanks As well!!! Worked for me too!
-tim -
Can anyone give me some instruction to do this from the web admin page? I am not sure how to do this otherwise. Any help would be appreciated.
Thanks
Glenn -
Well after upgrading to 1.2 final today - I got the 500 internal server error again.
I reapplied this patch, but it didn't work this time, so I went to uninstall and reinstall the package - which failed.
Now when I go to reinstall the package I get:Downloading package configuration file… done.
Saving updated package information... done.
Downloading Lightsquid and its dependencies... done.
Checking for successful package installation... failed!Installation aborted.
How might I clear out whatever is needed to get this thing running again? BTW... my other site that was upgraded to 1.2 yesterday is running perfectly fine.
-Tim -
I hate to post 'metoos', but I'm seeing this problem too.
If I go and do a pkg_info, it shows perl 5.8.8, shoouldn't that be correct?
Well, anyways, I would like to try out the copying of the perl file you recommended, but where should I copy it to?
And being a newbied on this, how do I get the file transfered to the pfsense machine?Best regards
-
Over write this file with the attached above
/usr/local/lib/perl5/5.8.8/mach/CORE/libperl.so
It worked for me the first time!
-
I still can't make it work.
I downloaded the libperl.so from the link.
I went to 'command' the webgui, and uploaded the file (to /tmp).
I then moved the file from /tmp/libperl.so to /usr/local/lib/perl5/5.8.8/mach/CORE/libperl.soStill fails.
Do I need to restart the server or ???
-
I still can't make it work.
Still fails.
Do I need to restart the server or ???
Very odd, I just tried again, and now it installed!!! I didn't change anything since yesterday, so did the package change in any way?
Well, this is just a happy camper, now I just need to figure out how to use it (I don't see any new menu items?).
/Fribse
-
Very odd, I just tried again, and now it installed!!! I didn't change anything since yesterday, so did the package change in any way?
I make changes. Old url broken - replaced to new.
How use:
- enable in squid log option & work some time (for have some log statistic's)
- looking option in Status/Proxy report (for quick - press button 'Refresh now')
- looking 'Lightsquid report' page.
-
Ahh, got it, thankyou!