SquidGuard and blank redirects?

ciarocci

I uninstalled the old version and installed the new version. Now squidguard behaves like it's not even there. It shows as running, but none of the configuration I do to it is taking any effect on my web browsing. While this is better than before (previously I couldn't browse at all if squidguard was enabled), it's still not what I need. Is there something else I need to do in my config besides just turn squidguard on? Do I need to do something in squid?

I tried fooling around in squid and squidguard and I kept applying the settings each time I made a change. At one point squid and squidguard would no longer start and I could no longer access the internet. I had to uninstall both packages to get back online. It seems the configs are not deleted when uninstalling a package because if I install it again I'm stuck with all my settings I had previously and can no longer get on the internet. At this point I can't even install either package without cutting myself off from the world. HELP!

Chris

dvserg

You always can disable squidGuard (disable+Save and Apply) - this deleted redirector options from squid config and stopped squidGuard. Use this way for checking how squid worked without SG.
Also check Log box on General page - read this messages for error while SG config updated (Apply).
By default SG blocked all connections, if found error in self config data.
You can delete all options on squidGuard GUI and step-by-stef make configuration once more.

ps: Bugs in sources may be too - i prepare all codes tonight :) But today i have many testing's all SG modes. Now my SG system work stable.

Thanks for help.

sullrich

Great work dvserg! I appreciate all the hard work you have been putting into the packages recently!! :)

ciarocci

Well, I seem to have a basic config up and running, except for the following. When a page is blocked it doesn't use the default URL Redirect. Instead I get the following:

ERROR
The requested URL could not be retrieved

–------------------------------------------------------------------------------

While trying to retrieve the URL: https://192.168.1.1/sgerror.php?

The following error was encountered:

Connection to 192.168.1.1 Failed
The system returned:

(92) Protocol error

The remote host or network may be down. Please try the request again.

Any ideas? The config is doing it's job, but I much rather see the default redirect URL come up instead of the error.

Chris

flachance

Same result here. I uninstalled and then installed and I am getting the same error page as ciarocci right away.

As well, the log tab of SG no longer seem to be able to retrieve any logs or configuration files.

Thanks

dvserg

Reinstall SG now - i replaced Log-page realisation. Disabled 'Blocked log' and 'squidGuard log' - because a longer time creating for big size log-files.
–-
This is sgerror.php behaviour, if called 'sgerror.php?url=code%20test%20page:
FFox - must showing generated sgerror page type as:


Request denied by pfSense proxy: code code-text 
Reason: test page
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------

IE - must used self frienly-error-pages on you win-system language with selected error-code. But on some codes (for example on my IE: sgerror.php?url=401%20test) IE give generated sgerror page as FFox.
This particularity IE - replace error messages with size 512(or 1024?)Kb by self page.
I have decided to leave such behaviour IE (but if need - may be exclude this)
–-

You may tested sgerror.php
http://youip/sgerror.php - about message
http://youip/sgerror.php?blank - blank page
http://youip/sgerror.php?blank_img - blank 1x1 GIF image
http://youip/sgerror.php?CODE%20Message - error page (looking above IE/FFox behaviour )

If you have problem - please inform what a browser you have.

ciarocci

I am using IE6. I continue to get the error explained above. If I put in the following:

https://192.168.1.1/sgerror.php?url=http://www.google.com

I get the google home page. That is what I expected to happen.

However, if I put in http://www.google.com in the default redirector of the SG config, I get the error page. Somehow the redirector is being ignored in the config and it is just calling https://192.168.1.1/sgerror.php without the redirector on the end. I don't even get the about page as I did by simply putting https://192.168.1.1/sgerror.php in the browser.

Chris

dvserg

Hi Chris
Can you post to my PM you squidGuard.conf?
Also can you test with WebGUI on http protocol?

ciarocci

I posted my conf as requested. However, I am unable to try this on HTTP not because of any security policy, and not because I do not want to, but simply because when I make the change from HTTPS to HTTP in the SYSTEM->GENERAL page, nothing happens. I can still get to the webGUI through HTTPS and only HTTPS even though the bullet is clearly on HTTP. I originally thought my firewall crashed because I couldn't get to the HTTP webGUI, but I tried the old HTTPS just for the hell of it, and wham, there it was. Now things are getting spooky. Why would it not allow me to change the webGUI even though it is clearly changed in the config? Does Squid or SG have a hold on it somehow? I definitely changed that setting fine before installing squid and SG and did not have any trouble.

Chris

mhab12

In the past I have had to reboot to make this change, can't say for extremely recent versions.

dvserg

Thanks. I found and fix one problem: 'http%3A%2F%2Fwww.'

redirect https://192.168.1.1/sgerror.php?url=http%3A%2F%2Fwww.kmaconnect.com&a=%a&n=%n&i=%i&s=%s&t=%t&u=%u

Reinstall new pease (ohm, difficalt new year ::) ).

flachance

Chris,

I was able to change my webGUI to HTTP. When I did, pfsense was smart enough to redirect to the HTTP on port 80.

dvserg,

It doesn't look like your coding of sgerror.php is complete. From the looks of it, you are adding different ways that sgerror.php can be called. I don't fully understand when or how that file would be called using the different parameters. All I know is that the only thing that I was getting displayed was the following:

url=&a=192.168.1.250&n=dlink.digitallachance.com&i=&s=default&t=porn&u=http://www.bikini.com/

Because the url parameter is blank, most of your logic was skipped. Given that the default redirect on the default tab of SG is always blank, that means that sgerror.php will never work.

I have modified sgerror.php to better suit my needs. Feel free to use/abuse ;D

http://lachance.gotomysite.com/sgerror.php

Unfortunately, this works only if you have your webGUI set to the standard port 80. As soon as I change back to HTTPS, it fails to open sgerror.php. Ultimately, I am trying to make sure that my webGUI is secure by using HTTPS on a non-standard port. If I have to stay with HTTP on port 80 in order to have the error page functionality in SquidGuard, then I will have to do without a nice error page.

Right now I get the following error when I turn HTTPS on:

ERROR
The requested URL could not be retrieved

While trying to retrieve the URL: https://192.168.1.1/sgerror.php?

The following error was encountered:

* Connection to 192.168.1.1 Failed

The system returned:

(92) Protocol error

The remote host or network may be down. Please try the request again.

Your cache administrator is xxx@xxx.
Generated Wed, 16 Jan 2008 05:46:43 GMT by localhost (squid/2.6.STABLE5)

Going directly to https://192.168.1.1/sgerror.php? displays the expected content.

Thanks for your hard work on this package dvserg!

dvserg

Hello flachance.
I have a little comment about 'sgerror.php':
This file writed for squidGuard needs. If redirect options in config invalid or not accesible. then content passed SG in the not-dependence SG-rules. And, sgerror.php always accesible for squidGuard and handle all him's redirections.
Format sgerror.php:
Main and impotant 'sgerror.php?url=_my_url', all others included for retrieve client-info from squidGuard ('a n i s t u' - values). ANISTU used for error-page information (nothing any).
_my_url have 3 forms:

http://myself.errorpage or https://myself.errorpage - this only redirect to '//myself.errorpage'
example: 'sgerror.php?url=http://example.com&…'
errcode<space>text ('404 You cant access') - this display generated error page (or inplaced in IE error page)
example: 'sgerror.php?url=404%20You%20cant%20access&a=...' // << url encoding exists
tags 'blank' and 'blank_img' - blank page and blank img for replacing banners(i use this)
example: 'sgerror.php?url=blank&a=...' - display blank page</space>

ciarocci

DVSerg,

The line you gave me looks exactly like the line already in my file unless my eyes are deceiving me. How is the line different then what I already have?

flachance,

Did you have to reboot to make the change from https to http and what version of PFSense are you running?

Chris

dvserg

You config have
redirect https://192.168.1.1/sgerror.php?url=http%3A%2F%2Fwww.kmaconnect.com&a=%a&n=%n&i=%i&s=%s&t=%t&u=%u

Must be
redirect https://192.168.1.1/sgerror.php?url=http://www.kmaconnect.com&a=%a&n=%n&i=%i&s=%s&t=%t&u=%u

Bug already fixed for '%3A%2F%2F'

ciarocci

Oh, I understand. You want me to install the newest version of SG. I'll do that. Thanks.

Chris

dvserg

@ciarocci:

Oh, I understand. You want me to install the newest version of SG. I'll do that. Thanks.

Chris

Language barrier in action :D

ciarocci

;D Yep ;D

flachance

No reboot required Chris.

acidrop

hello!

I've upgraded squidguard to the latest version and i have pfsense webgui running in https mode.
Also squid is in trasparent mode.I've made a block list of domains on squidguard which works but instead of redirecting to a local web server ip it shows a error page like this:

https://192.168.1.1/sgerror.php?

can anyone tell me how can i avoid this?

SquidGuard and blank redirects?

You may tested sgerror.php http://youip/sgerror.php - about message http://youip/sgerror.php?blank - blank page http://youip/sgerror.php?blank_img - blank 1x1 GIF image http://youip/sgerror.php?CODE%20Message - error page (looking above IE/FFox behaviour )

You may tested sgerror.php
http://youip/sgerror.php - about message
http://youip/sgerror.php?blank - blank page
http://youip/sgerror.php?blank_img - blank 1x1 GIF image
http://youip/sgerror.php?CODE%20Message - error page (looking above IE/FFox behaviour )