Is the squidguard package stable at the moment…..

ColdFusion

Seems to be working now. Since the last few changes, I can no longer access the blocked log report tab….I get block_log report disabled. The other thing I'm trying to figure out is how to whitelist certain sites that are in the blacklist...

dvserg

I can no longer access the blocked log report tab....I get block_log report disabled.

I disable this function. After short time i return to renew this code with more quick algorithm (i houpe).
If you need this now - you can modify squidGuard.php:

comment with '#' line 710

#                                $slog .= 'block_log report disabled';

delete '/' and '/' symbols in 711 and 747 lines.

ps this actual on today time; in next time code can changed.

heiko

Sorry dvserg, i wouldn´t set off an avalanche with my question.
Greetings
Heiko

ColdFusion

I finally figured out how to whitelist a url that's blacklisted. In destination tab I created a whitelist and blacklist. When I put a url that I want to add to the blacklist it worked. However when I put a url that I want to whitelist it still didn't work. I looked in the squidgaurd config and found this:
dest whitelist {
domainlist whitelist/domains
urllist whitelist/urls
log block.log
}

dest Blacklist {
domainlist Blacklist/domains
urllist Blacklist/urls
redirect http://192.168.0.1/sgerror.php?url=http://www.yahoo.com&a=%a&n=%n&i=%i&s=%s&t=%t&u=%u
log block.log
}

acl {
default {
pass !blk_BL_adv !blk_BL_aggressive !blk_BL_chat !blk_BL_drugs !blk_BL_gamble !blk_BL_hacking !blk_BL_porn !blk_BL_redirector !blk_BL_spyware !blk_BL_tracker !blk_BL_warez whitelist !Blacklist all
redirect http://192.168.0.1/sgerror.php?url=http://www.yahoo.com&a=%a&n=%n&i=%i&s=%s&t=%t&u=%u
}
}

However the my whitelist and blacklist were added to the back of the config. I edited my xml config and replaced it with this:
dest whitelist {
domainlist whitelist/domains
urllist whitelist/urls
log block.log
}

dest Blacklist {
domainlist Blacklist/domains
urllist Blacklist/urls
redirect http://192.168.0.1/sgerror.php?url=http://www.yahoo.com&a=%a&n=%n&i=%i&s=%s&t=%t&u=%u
log block.log
}

acl {
default {
pass whitelist !Blacklist !blk_BL_adv !blk_BL_aggressive !blk_BL_chat !blk_BL_drugs !blk_BL_gamble !blk_BL_hacking !blk_BL_porn !blk_BL_redirector !blk_BL_spyware !blk_BL_tracker !blk_BL_warez all
redirect http://192.168.0.1/sgerror.php?url=http://www.yahoo.com&a=%a&n=%n&i=%i&s=%s&t=%t&u=%u
}
}

I put my whitelist and blacklist in front of the file…..it now works.

dvserg

@ColdFusion:

I put my whitelist and blacklist in front of the file…..it now works.

You wanted say, what SG dest order has important meaning?
I not found information in manuals about this
If you can - please help find it fo me - this is really important.
Thanks.

ColdFusion

Maybe I should clarify. The order seems important. If you look at the example above I just moved the whitelist to the front. The additional blacklist created doesn’t matter the order. I found the info at http://squidguard.shalla.de/Doc/configure.html

Whitelisting

Sometimes there is a demand to allow specific URLs and domains although they are part of the blocklists for a good reason. In this case you want to whitelist these domains and URLs.
Defining a whitelist
dest white {
domainlist white/domains
urllist white/urls
}

acl {
default {
pass white !adv !porn !warez all
redirect http://localhost/block.html
}

}

Basically the whitelist works before the blacklist.

ColdFusion

I guess one would get the same result if you named your whitelist something like AA….first order seems to be ads.....Example AA ads aggressive......

acl {
default {
pass AA !blk_adv !blk_BL_aggressive !blk_BL_chat !blk_BL_drugs !blk_BL_gamble !blk_BL_hacking !blk_BL_porn !blk_BL_redirector !blk_BL_spyware !

didn't try this though but should work.

John

dvserg

Thanks!!!
English causes some difficulties for me, and nuances sometimes disappear :-\

A chnange config generator AS:
pass <allow_rules><block_rules>all|none</block_rules></allow_rules>

acidrop

After a de-install and reinstallation of SG i get the following error each time i press apply in the general settings tab:

Warning: implode(): Bad arguments. in /usr/local/pkg/squidguard_configurator.inc on line 312 Warning: Cannot modify header information - headers already sent by (output started at /usr/local/pkg/squidguard_configurator.inc:312) in /usr/local/www/pkg_edit.php on line 35

..and nothing is blocked anymore :(

pls help!

ColdFusion

@acidrop:

After a de-install and reinstallation of SG i get the following error each time i press apply in the general settings tab:

Warning: implode(): Bad arguments. in /usr/local/pkg/squidguard_configurator.inc on line 312 Warning: Cannot modify header information - headers already sent by (output started at /usr/local/pkg/squidguard_configurator.inc:312) in /usr/local/www/pkg_edit.php on line 35

..and nothing is blocked anymore :(

pls help!

I had the same problem. I had to reinstall the package xml…then that cleared up the error and everything is working fine.

ColdFusion

Well, I spoke to soon….There were changes to SquidGuard today, so I downloaded it again on a test box to see if I get the error....and I am.......Warning: implode(): Bad arguments. in /usr/local/pkg/squidguard_configurator.inc on line 312 Warning: Cannot modify header information - headers already sent by (output started at /usr/local/pkg/squidguard_configurator.inc:312) in /usr/local/www/pkg_edit.php on line 35

dvserg

Fixed Please update package. :-[

acidrop

thnx for the quick fix! ;D

dvserg

@acidrop:

thnx for the quick fix! ;D

I have found this yesterday and has corrected, but has forgotten to save to pfsense.com

heiko

Hi,
now SG works for me with a fresh installation of 1.2rc5 and your updates for SQ. First of all, thank you very much. I have setup the default config, no special destinations, times and so on…..
The redirector page does not work for me. For each blocked url i became

While trying to retrieve the URL: https://192.168.6.1:61003/sgerror.php?
The following error was encountered: ........

Furthermore i cannot fetch the blocked url´s at the log-tab, is reporting disabled?

The checkboxes for choosing the blocked destinations on the default tab (default access | all -- deny access) cannot always save if i click on the save button, sometimes it is saved with checked, sometimes is after a php-reload the checkbox again unchecked.....

I have special rewrites on the "rewrite tab" and cannot save the rewrite because i have in the rewrite-name a non-valid-symbol so all of my typed rewrite were lost. And how the rewrites works?? I have a rewrite and choose this rewrite template at the "default" tab, the click save and apply (General settings), but the rewrite is not function....

Without a correct redirect and a blocked-url-log i cannot say to the staff member which is passed.....

My config errors maybe....

Greetings
Heiko

dvserg

 https://192.168.6.1:61003/sgerror.php?

This is big problem for use Internal error generator 'sgerror.php' and https
I can't view way for 'frienship' this
In https gui mode you must set 'Redirect mode' as external (General page) and use ext page in ext server >:(
–-
Log tab i today recreated (old version very slowly on big log's)
Pls Reinstall and check this.

Rewrites work as replacer url or url-template to specified you url
for example
*/porn.jpg - http://myweb.com/pornstop.jpg
replace all pron.jpg to you pornstop.jpg
if you can - place screenshots of error-names.
I can't retry you error (test rc-4 and rc-2).

ps where take rc-5?
Best regards.
Serg

heiko

OK, i will do
Thanks

ColdFusion

dvserg,

Nice work. SG is working great. My whitelist is working perfectly and now the block logging works.

Outstanding Job!!

John

heiko

OK, block logging works, thanks, but why is www.google.de blocked from "filter/porn". I don´t know, i think i must setup also a whitelist….

If i setup the redirect to external , nothing blocks anymore. I have made severals "saves and applys" on the general and default. Nothing happens.

Greetings
Heiko

heiko

@dvserg:

 
Rewrites work as replacer url or url-template to specified you url
for example
*/porn.jpg - http://myweb.com/pornstop.jpg
replace all pron.jpg to you pornstop.jpg
if you can - place screenshots of error-names.
I can't retry you error (test rc-4 and rc-2).

ps where take rc-5?
Best regards.
Serg

Ah, i will test it again with rewrites and here you can get rc5/release
http://snapshots.pfsense.org/FreeBSD6/RELENG_1_2/updates/