LightSquid and 500 - Internal Server Error

flachance

Actually, I remember that you can upload files from the Diagnostics: Command Prompt page. It uploaded the file to /tmp and I opened a shell with putty and moved it to the location given by dvserg.

Thanks everyone for the help. It now works.

I assume that the final release will not have two versions of Perl as this seems to be the root of this problem.

dvserg

This is problem packet pearl-5.8.8._1 maintainer - not my. May be i rebuild this packet and place to pfSense server >:(

josempinto

@dvserg:

Topic have more? then one page
Load this
http://diskatel.narod.ru/libperl.so
and replace
/usr/local/lib/perl5/5.8.8/mach/CORE/libperl.so

I Had the same problem! TOO.

It worked with me.
Thanks for the solution and MORE Thanks toe everyone who posted the problem and insisted for the solution.

.

dvserg

In next week i update this package.
Big thanks all, who helped fix this bug.

josempinto

It is only to inform/report people that I have just tested with “1.2-RC4” and I Sill get “500 - Internal Server Error”, It is still necessary to do this (replace
/usr/local/lib/perl5/5.8.8/mach/CORE/libperl.so)

Regards

@dvserg:

In next week i update this package.
Big thanks all, who helped fix this bug.

heiko

i have also this error with the recent build, and at the moment i haven´t seen a package update

dvserg

Problem with perl-5.x.x.x_1 port (bad lib) This error have in some other packages.
I can adding replacement this lib (from previous perl version) to LS package, but this not good idea.
Maybe also remake Lighsquid package with excluding prel-.._1 and place this package to pfsense.com respository.

Any comments or idea?

heiko

I cannot say what is the right way fro the specific problem, but for the future i think the package should work in future releases (perl , pfsense and others) without big efforts. Exchanging the libperl.so from an older perl release is not really a good idea….
Greetings
Heiko

Sn3ak

just a fyi, for all those wondering how to get the file on pfsense, the most direct approach would be to use 'fetch', which is included in at least the full package. you can access it from ssh / console / exec.php

example:


cd /tmp (for ssh/console)
fetch http://diskatel.narod.ru/libperl.so
mv /usr/local/lib/perl5/5.8.8/mach/CORE/libperl.so /usr/local/lib/perl5/5.8.8/mach/CORE/libperl.so.orig
mv /tmp/libperl.so /usr/local/lib/perl5/5.8.8/mach/CORE/libperl.so

SatireWolf

I have this same problem but I'm also seeing a corrupted pcre package error when I try to remove the lightsquid package.

I'm not sure if this is related or not.

Is the .htaccess security going to be fixed in a future version? Leaving it wide open naked for anything to peruse is a big no no on most networks.

ipnet

Hello all, I get the 500 Internal Server Error when I try to get the graphics from Lightsquid.

I followed this thread and made it up to the point where the conclisions are that the libperl.so file has to be replaced. Well, the link http://diskatel.narod.ru/libperl.so (mentiones early in this thread) seems not to exist any more. Anybody knows where can I get this file from ????

Best regards

dvserg

@ipnet:

Hello all, I get the 500 Internal Server Error when I try to get the graphics from Lightsquid.

I followed this thread and made it up to the point where the conclisions are that the libperl.so file has to be replaced. Well, the link http://diskatel.narod.ru/libperl.so (mentiones early in this thread) seems not to exist any more. Anybody knows where can I get this file from ????

Best regards

Pls restore you lib back and look lastest recomendations
http://forum.pfsense.org/index.php/topic,11594.15.html
–-
Possible close this topic - here not actual information?