Pfsense causes internet to freeze.
-
My internet freezes about every 10 seconds. I use 1.2-RC3 atm but had the same problem with 1.2-FINAL.
Mar 15 15:54:23 php: : Not a valid interface action "" Mar 15 15:54:23 php: : Processing - Mar 15 15:54:23 php: : Not a valid interface action "" Mar 15 15:54:23 php: : Processing start - Mar 15 15:54:23 php: : Hotplug event detected for dc0 but ignoring since interface is not set for DHCP Mar 15 15:54:23 php: : Processing dc0 - start Mar 15 15:54:22 check_reload_status: rc.linkup starting Mar 15 15:54:20 kernel: dc0: link state changed to UP Mar 15 15:54:18 kernel: dc0: link state changed to DOWN Mar 15 15:53:41 php: : Not a valid interface action "" Mar 15 15:53:41 php: : Processing - Mar 15 15:53:41 php: : Not a valid interface action "" Mar 15 15:53:41 php: : Processing start - Mar 15 15:53:41 php: : Hotplug event detected for dc0 but ignoring since interface is not set for DHCP Mar 15 15:53:41 php: : Processing dc0 - start Mar 15 15:53:40 check_reload_status: rc.linkup starting Mar 15 15:53:37 kernel: dc0: link state changed to UP Mar 15 15:53:35 kernel: dc0: link state changed to DOWN
Any temp fix for this or something?
-
Your link on dc0 is going up and down all the time. Check cable, switchport and NIC.
-
Everything seems to be fine.
-
How long is the cable between switch and nic? I have seen funy things happening when using too short cables on some equipement. Your logs clearly state that the link is coming up and down all the time.
-
I think its a 3-m cable.. tho it has been working for 6 months without this problem before.
-
Things always tend to run fine until they break ;)
Still looks like a hardwareproblem to me. Maybe reset the switch. -
Tried to restart the router(pfsense), the switch and the modem.
-
This is a hardwarefailure. You have to start changing equipement to find out what's wrong I guess.
-
Seems like it only happends when there is trafic.
Mar 16 08:29:23 kernel: dc0: link state changed to DOWN Mar 16 01:56:46 kernel: dc0: link state changed to DOWN
The time that i was sleeping it didnt fail.
Dunno if this helps.
LAN interface (dc0) Status up IP address 192.168.0.1 Subnet mask 255.255.255.0 Media 10baseT/UTP In/out packets 2258538/2942016 (633.59 MB/2.52 GB) In/out errors 0/0 Collisions 319902
Do i get all those collisions because i use a hub, and not a switch?
-
I think you have some autonegotiation issues. You could try to hardcode the interface speed by using hidden config.xml magic. See http://doc.m0n0.ch/handbook-single/#FAQ.hiddenopts for how to set mediaoptions. It's the same for pfSense.
-
I think you have some autonegotiation issues. You could try to hardcode the interface speed by using hidden config.xml magic. See http://doc.m0n0.ch/handbook-single/#FAQ.hiddenopts for how to set mediaoptions. It's the same for pfSense.
Trying it now, still have alot of collitions though!
-
Still not working. The wierd thing is that it doesnt happen between 00 and 09 in the night/morning. :S
-
Trying it now, still have alot of collitions though!
You'll always get that with a hub, that's why it's been pretty much impossible to buy one for the last 5+ years ;)
-
Well, our switch broke down and i had this old baby still. :D
(the problem did not start when i switched to hub) -
If you've always had high collisions then you had a very badly broken switch. Your other problems (as you've been told, repeatedly) strongly point to broken hardware.
-
No i have not always had high collisions, only when using the hub.